ATEN 12-BUTTON Keypad With Tabletop KIT (white) - VK112EUTTK

ATEN VK112EUTTK 12-Button Control Keypad with Tabletop Kit (White)

Overview

The VK112EUTTK is a 12-button control keypad bundled with a tabletop kit, designed for ATEN VETRO and Control Box-based control system deployments where operators need a clean, fixed surface interface — think conference room AV control, boardroom lighting scenes, or huddle space automation where wall-box recessing isn't an option. The keypad ships white and supports up to 12 physical buttons configurable across 125 distinct keypad layouts, so the same hardware fits single-function trigger setups or full multi-zone scene control without swapping units. A 1x 8-segment switch handles keypad ID addressing, keeping multi-keypad installations on the same bus sorted without firmware intervention. The semi-recessed reset pushbutton prevents accidental factory resets during normal operation — relevant in always-on AV environments where an unintended reset mid-presentation is a real problem.

Compatibility

The VK112EUTTK is part of the ATEN VETRO Control System ecosystem. It is designed to pair with ATEN Control Box models (VK series) that support the VK112EU keypad interface. Verify your Control Box model supports external keypad expansion before ordering — not all VK Control Box variants share the same keypad port count or bus topology. The 6–12 button layout flexibility means it integrates across room configurations from simple single-source switching to tiered multi-zone scene recall. The tabletop kit positions the keypad on a conference table or equipment surface; for in-wall recessed installation, a separate wall-plate bracket is required.

Installation Notes

Operating humidity is rated 0–80% RH non-condensing — standard for climate-controlled commercial interiors; do not deploy in mechanical rooms or unconditioned spaces with condensation risk. Keypad ID is set via the onboard 8-segment switch before installation; address conflicts on multi-keypad buses are the most common commissioning issue, so plan your ID map before mounting. Firmware v4.0.391 (released 2026-03-13) is the current baseline — confirm your Control Box firmware is compatible before updating the keypad, as version mismatches between keypad and controller can cause enumeration failures. The tabletop kit does not require drilling; the recessed mount option requires a standard wall cutout sized to the VK112EU form factor.