Panduit TF10IW-X Pan-Way LD10 Low-Voltage Tee Fitting
The Panduit TF10IW-X is a low-voltage tee fitting designed for the Pan-Way™ LD10 surface raceway system — the right piece when a cable run needs to branch in a T-configuration along a perimeter wall or baseboard. Molded from UL94V-0-rated PVC in an off-white (bone white) finish, the TF10IW-X ships in a 10-pack, making it practical to stock for larger installations where multiple branch points are required in a single pull.
Overview
Surface raceway installations in commercial environments — classrooms, healthcare corridors, open-plan offices, retail backrooms — routinely need to split a cable path without cutting into the wall. The TF10IW-X handles that split cleanly at the LD10 raceway, maintaining a finished, consistent appearance across the run. The fitting is sized specifically for the LD10 profile (40.6 mm wide × 23.1 mm tall), so it sits flush and aligns with adjacent LD10 duct sections, covers, and couplers without shimming or modification.
This fitting is part of the broader Panduit Pan-Way surface raceway line, a system designed for low-voltage cabling — data, voice, and low-voltage power runs — along surface raceway systems where in-wall routing isn't feasible or permitted.
Key Features
- T-Branch Configuration: Splits a single LD10 raceway run into two directions at a right-angle junction. Use this when a horizontal corridor run needs to feed a drop-down to an outlet or device — avoids field-cutting fittings and keeps the installation looking intentional rather than improvised.
- LD10-Specific Fit (40.6 mm × 23.1 mm): Engineered to match the LD10 profile exactly — 1.6 in. wide, 0.91 in. tall. Mixing raceway components across profile sizes is one of the most common field errors; this fitting eliminates that risk by being dimensionally locked to the LD10 system.
- UL94V-0 PVC Construction: The UL94V-0 flame rating means the material self-extinguishes — it won't propagate a flame along the raceway run. In occupied commercial spaces and healthcare environments where code compliance is scrutinized, this rating is the baseline expectation, not a bonus.
- FT4 Rating: FT4 (flame and smoke) compliance confirms the fitting meets Canadian electrical code requirements for flame spread in cable trays and raceways. If the installation crosses a Canadian jurisdiction or the spec sheet calls for FT4, this fitting covers it without substitution.
- TIA/EIA and UL Standards Compliance: Meets TIA/EIA structured cabling standards and UL requirements — relevant when the installation is part of a documented structured cabling system and the installer needs to hand off a compliant bill of materials to the building owner or IT department.
- Off-White (Bone White) Finish: Matches standard painted drywall and ceiling tile colors better than bright white in most commercial interiors. Color consistency across the LD10 system — duct, covers, fittings — produces a clean finish that doesn't draw attention in tenant-facing spaces.
- 10-Pack Quantity: Priced and packaged per 10 units (carton quantity 50). For jobs with multiple branch points, ordering by the pack rather than individually reduces per-unit cost and avoids mid-job reorders. Plan branch-point count early — running short of tee fittings on a large perimeter run is a common delay.
Integration & Compatibility
The TF10IW-X (often searched as TF10IW X) is designed exclusively for use with the Panduit Pan-Way LD10 single-channel surface raceway. It is not interchangeable with other LD profile sizes (LD3, LD5, LD10B, etc.) — the channel width and cover geometry differ between profiles. Before ordering, confirm the installed or specified raceway is LD10.
This fitting is appropriate for low-voltage cabling: structured data cabling (Cat5e/Cat6/Cat6A), coaxial, audio/visual, and low-voltage power leads. It is not rated or designed for line-voltage (120V/240V) power wiring. When running both power and data in a perimeter installation, verify local code on separation requirements — the LD10 system's multi-channel variants exist specifically for that use case, but the TF10IW-X tee fitting applies only to the single-channel LD10.
For projects involving structured network cabling or camera and security system cable routing, the Pan-Way LD10 system and its fittings — including this tee — integrate cleanly with standard low-voltage installation practices. Pair with LD10 duct, couplers, end caps, and inside/outside corner fittings to complete the system.
What's in the Box
- 10× Panduit TF10IW-X Pan-Way LD10 Low-Voltage Tee Fitting, Off-White
Frequently Asked Questions
Q: What raceway profile is the TF10IW-X compatible with?
A: The TF10IW-X is designed specifically for the Panduit Pan-Way LD10 single-channel surface raceway. It is not compatible with other LD profile sizes. The LD10 channel measures 40.6 mm (1.6 in.) wide × 23.1 mm (0.91 in.) tall.
Q: Can the TF10IW-X be used with line-voltage (120V) wiring?
A: No. This is a low-voltage fitting intended for data, voice, coaxial, and low-voltage power cabling only. For line-voltage raceway applications, use a fitting rated and listed for that purpose.
Q: What standards does the TF10IW-X meet?
A: The TF10IW-X meets UL94V-0 (self-extinguishing flame rating), FT4 (flame and smoke for Canadian code), TIA/EIA structured cabling standards, and UL requirements.
Q: How many fittings come in one order of TF10IW-X?
A: Each package contains 10 tee fittings. The full carton quantity is 50 units (5 packs).
Q: What color is the TF10IW-X?
A: Off-white (bone white) — consistent with the Pan-Way LD10 raceway system's standard off-white finish for commercial interior installations.
Q: Is the TF10IW-X material flame-retardant?
A: Yes. The PVC material carries a UL94V-0 flame rating, meaning it self-extinguishes and will not propagate a flame along the raceway run — meeting baseline commercial building requirements.
The TF10IW-X is the piece most installers forget to count until they're mid-run. It's a 10-pack of Pan-Way LD10 tee fittings — molded PVC, 40.6 mm wide, UL94V-0 rated — and on any perimeter raceway job with multiple branch drops, you'll need more of these than you initially spec'd. I've seen jobs stall waiting for tee fittings on a surface raceway pull that was otherwise ready to terminate.
Technical Highlights:
- UL94V-0 Flame Rating: Self-extinguishing PVC — the fitting won't carry a flame along the raceway. In healthcare and occupied commercial spaces, this isn't optional; it's what gets the installation signed off by the AHJ.
- Exact LD10 Profile Fit (40.6 mm × 23.1 mm): This fitting is dimensionally specific to the LD10 channel. Substituting a fitting from a different LD profile will leave gaps or prevent the cover from seating — a visible defect in tenant-facing spaces.
- 10-Pack / 50-Unit Carton: The pack-of-10 format is the right buy for most single-room jobs; order by the carton (50) for full-floor or multi-zone pulls where branch-point count runs high.
Deployment Considerations:
- Confirm the installed raceway is LD10 before ordering — the profile size (1.6 in. wide) is the check. LD3, LD5, and LD10B are different profiles and this fitting will not seat correctly in them.
- The TF10IW-X is low-voltage only. If the run includes 120V circuits alongside data cabling, you need the appropriate dual-channel LD raceway and voltage-rated fittings — this tee does not qualify for that application.
Best fit: a multi-drop perimeter data cabling installation in a commercial office, classroom, or healthcare corridor where the LD10 raceway is already specified and multiple branch points feed wall plates, cameras, or access control readers along the run.
