Zebra CRD-TC2L-SE5ET-01 5-Slot Charge/Comm ShareCradle
Overview
The Zebra CRD-TC2L-SE5ET-01 is a five-slot charging and communication cradle engineered for warehouse, logistics, and field service deployments using Zebra TC22 and TC27 rugged mobile computers. The ShareCradle architecture is built to eliminate downtime between shift rotations by enabling simultaneous charging of multiple devices while maintaining active host communication connectivity. This matters in operations where devices rotate through teams continuously—you avoid the bottleneck of sequential charging or choosing between communication access and power. Mixed-fleet environments benefit directly: a single cradle type handles both TC22 and TC27 form factors without adapter swaps.
Key Features
- Five independent charging slots: Charge up to five mobile computers at once, reducing the footprint required for dock-based or wall-mounted charging stations compared to deploying single-device chargers across your warehouse floor.
- Simultaneous charge-and-sync operation: Data synchronization and management system connectivity remain active while devices charge. No need to unplug a computer from the cradle to check inventory status or push configuration updates—real operational efficiency gain, especially in high-throughput distribution centers.
- Dual-device compatibility (TC22 and TC27): The CRD-TC2L-SE5ET-01 accepts both TC22 and TC27 mobile computers without mechanical adapters or firmware changes. Simplifies inventory management across your fleet and supports phased hardware migrations without infrastructure rework.
- USB communication interface: Standard USB connection to host systems integrates with enterprise mobility management platforms and third-party MDM solutions. Reduces proprietary dependency and leverages existing integration patterns your IT team already understands.
- Compact multi-slot design: Five devices in a consolidated form factor—ideal for dock areas, break rooms, or warehouse supervisor stations where space is constrained but device throughput is high.
- Included power supply: Shipped with AC mains power supply and USB communication cable. Eliminates the sourcing burden and ensures impedance matching to the cradle's internal charging logic.
Integration & Deployment Scenarios
The CRD-TC2L-SE5ET-01 integrates directly into enterprise mobility management workflows. Dock-based installations support morning shift equipment distribution and evening collection cycles. Wall-mounted configurations work well in distribution centers and retail back-of-house areas where mobile computers are staged for quick-pick operations. The cradle is compatible with Zebra TC-series mobile computer ecosystems and enterprise MDM platforms that recognize standard USB charge-and-sync device class endpoints. For last-mile logistics and field service fleets, the cradle supports staged rotation patterns: devices charge in the cradle while management systems push updates or pull transaction logs, ensuring field teams retrieve fully configured and synchronized equipment at shift start.
What's in the Box
- 1x five-slot ShareCradle unit
- 1x power supply (AC mains)
- 1x USB communication cable
Frequently Asked Questions
Q: Is the CRD-TC2L-SE5ET-01 compatible with TC21 or older Zebra mobile computers?
A: No. The CRD-TC2L-SE5ET-01 is designed exclusively for TC22 and TC27 devices. Older TC-series generations require different cradles due to physical form factor and connector differences.
Q: Can I mount the CRD-TC2L-SE5ET-01 vertically on a wall?
A: Yes. The cradle supports wall-mounted deployment scenarios in addition to dock-based installations. Consult mounting guidelines in the datasheet for load ratings and fastener specifications.
Q: Does the USB connection support simultaneous charging and host communication without devices disconnecting?
A: Yes. The ShareCradle architecture maintains active USB communication while all five slots charge. Devices remain synchronized to the host system throughout the charging cycle.
Q: What power input does the included supply provide?
A: The CRD-TC2L-SE5ET-01 ships with an AC mains power supply. Specific voltage and current ratings are documented in the product datasheet.
Q: Can I use the cradle with third-party MDM systems like MobileIron or IBM Maas360?
A: Yes. The USB communication interface follows standard device class endpoints, enabling integration with most enterprise mobility management platforms. Verify your MDM supports Zebra TC22/TC27 endpoints—if your MDM recognizes those devices over USB, the cradle will work.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The CRD-TC2L-SE5ET-01 solves a real logistics problem: you either charge devices offline or keep them online, rarely both. This cradle—often searched as CRD TC2L SE5ET 01—eliminates that false choice. Five simultaneous charge-and-sync slots mean your inventory devices spend zero time disconnected from your MDM or warehouse management system. In high-velocity operations like same-day logistics or grocery distribution, that connectivity continuity reduces configuration delays and ensures field teams deploy with current data.
Technical Highlights:
- ShareCradle charge-and-sync architecture: Active USB communication during charging eliminates the cycle-break that single-device chargers introduce. Real-world benefit: overnight you can push software updates, retrieve transaction logs, and rotate device assignments without unplugging gear from power.
- Five independent slots for TC22 and TC27: Dual compatibility in one form factor means you don't maintain separate cradle inventories during a TC21-to-TC27 migration. One purchase scales across your entire fleet as you upgrade.
- Integrated power supply and USB cable: No hidden sourcing burden. The included AC supply and USB communication cable are spec'd to the cradle's charging topology—no guessing on impedance or connector compatibility.
Deployment Considerations:
- The five-slot footprint is compact but still requires power outlet proximity. Dock-based or wall-mounted locations work best; avoid installations more than 6–10 feet from available AC service unless you run dedicated power runs.
- Confirm your MDM or enterprise system recognizes the Zebra TC22 and TC27 as standard USB device classes. Non-standard MDM configurations may require vendor certification testing before full charge-and-sync operation is guaranteed.
Ideal for warehouse and last-mile operations where device rotation cycles are tight and connectivity during charge cycles is non-negotiable. If your team manages 10+ rugged mobile computers across a single shift and downtime compounds delay, this cradle pays for itself in two weeks of operational efficiency.
