Zebra CRD-NTC5X-1SNWS-01 Connect Cradle
Overview
The Zebra CRD-NTC5X-1SNWS-01 is a dedicated docking cradle designed for the Zebra TC53 and TC58 rugged mobile computers. This accessory delivers simultaneous charging and high-speed data connectivity in fixed environments, eliminating the need to manually plug in USB cables or wait for wireless transfers when devices rotate through receiving, dispatch, or office locations. The cradle (often searched as CRD NTC5X 1SNWS 01) mounts securely on desks, counters, or shelving, handling the high-traffic cycle of warehouse and logistics operations where devices dock multiple times per shift.
Key Features
- Dual-Function Docking: Charges and syncs data simultaneously, cutting handoff time at transition points. When a TC53 or TC58 arrives at the dock, both power and data transfer begin immediately—no separate steps, no cable hunting.
- Seamless Device Integration: Designed specifically for TC53 and TC58 form factors, ensuring a secure physical fit and proper electrical contact. The cradle aligns the device connector without forcing, reducing contact wear over hundreds of dock cycles.
- Android Compatibility: Works with the standard Android operating systems deployed on Zebra TC53/TC58 units, integrating directly with existing device management workflows. No custom drivers or firmware patches required—plug it into your infrastructure as-is.
- Fixed-Location Deployment Model: Ideal for warehouses, receiving docks, dispatch centers, and field offices where devices return to a central point for periodic synchronization. Deploy multiple cradles across zones to ensure devices are always ready on the next shift.
- Warehouse-Grade Durability: Built to tolerate the vibration, temperature swings, and electrical noise of logistics environments. Designed for the same mission profile as the TC53/TC58 themselves.
- Integration with Zebra Ecosystem: The cradle connects into existing mobile computer deployments and management systems. If your workflow includes warehouse automation or fleet synchronization patterns, this accessory fits as a standard component.
Integration & Compatibility
The CRD-NTC5X-1SNWS-01 pairs with Zebra TC53 and TC58 mobile computers. Both models run Android and support standard synchronization protocols, making the cradle compatible with enterprise device management platforms (MDM/EMM) that manage these devices. No proprietary software or custom configuration is required; the cradle is a pure hardware accessory that handles power and data passthrough to the device's native connector.
Deploy this cradle alongside your existing TC53/TC58 fleet without workflow changes. Whether you are managing handheld mobile computers in logistics, healthcare, or field service, the dock's role is to reduce downtime between shifts and ensure data synchronization occurs reliably during idle windows.
Frequently Asked Questions
Q: Is the CRD-NTC5X-1SNWS-01 compatible with TC56 or other Zebra mobile computers?
A: No. This cradle is designed specifically for TC53 and TC58 models. The connector and physical form factor differ on other Zebra handheld computers, so compatibility is limited to these two models.
Q: Can the cradle transfer data over USB or does it require wireless sync?
A: The CRD-NTC5X-1SNWS-01 provides wired data connectivity through the device connector. When a TC53 or TC58 is seated, both charging and data transfer occur via the cradle's connection—no wireless requirement.
Q: How many devices can dock simultaneously?
A: Each cradle holds one device. If you need to dock multiple TC53/TC58 units in parallel, purchase multiple cradles and position them in a docking station or shelf array.
Q: What power supply does the cradle require?
A: The cradle connects to a standard power source to charge the docked device. Consult the detailed product documentation for voltage and current specifications relevant to your deployment.
Q: Does the cradle work with TC53/TC58 case and screen protector combinations?
A: Thick cases or protective films may interfere with the connector alignment or seating depth. Verify fit with your specific device configuration before deploying the cradle across multiple sites.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Zebra CRD-NTC5X-1SNWS-01 is a straightforward accessory that solves a real logistics pain point: getting TC53 and TC58 devices charged and synchronized without manual USB cable management. The dual-function design (power + data in one dock) cuts idle time and is especially valuable in high-volume receiving or dispatch operations where dozens of devices cycle through a shift.
Deployment Considerations:
- One Device Per Cradle: Each CRD-NTC5X-1SNWS-01 is a single-device dock. If your workflow requires simultaneous charging of 5 or 10 TC53/TC58 units, budget for 5–10 cradles and arrange them in a charging shelf or station array. Consider the footprint early.
- Device-Specific Form Factor: This cradle is engineered for TC53 and TC58 connectors only. TC56, TC72, or other Zebra models will not fit. Verify your fleet composition before ordering—mixing device models means buying multiple cradle types.
- Power and Connector Durability: The contacts and connectors handle hundreds of dock/undock cycles per year. Over 3–5 years in a high-traffic warehouse, contact wear is normal. Budget for replacement cradles as part of device lifecycle costs if you deploy 10+ units.
Positioning: This cradle is essential for warehouses, logistics hubs, and field offices where TC53/TC58 devices are the primary data-capture tool and reliable synchronization during idle windows is non-negotiable. It's not a universal accessory—it's a purpose-built dock for these two Zebra models. Deploy it when your operation requires frequent docking, not occasional charging.
