Zebra CRD-NGTC5N-5SC4B 4-Slot Charging Cradle
Overview
The Zebra CRD-NGTC5N-5SC4B is a dedicated 4-slot charging cradle purpose-built for TC53(e), TC58(e), and TC58(R) rugged Android mobile computers. This is an accessory designed specifically to address a common logistics and warehouse bottleneck: charging multiple handhelds simultaneously without occupying desk space or creating cable clutter. The cradle accepts up to four devices in parallel and includes a power supply in the package. Black finish; no Bluetooth capability.
Key Features
- 4-Slot Simultaneous Charging: Charge four TC53 or TC58 units at once, reducing cycle time between shifts — critical when a single device going offline impacts order picking or receiving throughput.
- Dedicated TC53/TC58 Compatibility: Designed explicitly for Zebra TC series rugged handhelds, ensuring reliable electrical and mechanical fit. Not a generic multi-device cradle; proprietary connectors and geometry mean no guesswork about whether your specific model will seat properly.
- Integrated Power Supply Included: No separate power brick sourcing — shipped with the correct supply for the cradle. Reduces onboarding friction when deploying to a new warehouse or field location.
- Compact Multi-Unit Footprint: Four slots in a single cradle occupy far less counter or shelf space than four individual charging cables or four separate single-slot cradles. Matters in tight warehouse office or vehicle-mounted environments.
- Battery and Device Connectivity: Charges the device battery while simultaneously establishing data connectivity — useful if you need to push configuration updates or sync logs during the charging cycle.
- Black Finish, Industrial Design: Matte black aesthetic typical of Zebra rugged hardware; designed to withstand typical warehouse handling without visible wear or finish degradation.
Integration & Compatibility
The CRD-NGTC5N-5SC4B is compatible with TC53(e), TC58(e), and TC58(R) models only. Verify your device SKU before ordering — these are rugged Android devices commonly deployed in warehouse management systems (WMS), retail point-of-service, field service, and logistics workflows. If you operate a mixed fleet of Zebra handhelds (e.g., some TC51 or TC56 legacy units alongside TC58s), you will need a separate cradle for older models; this cradle will not accommodate them. Confirm exact model numbers with your device inventory before finalizing the purchase.
The cradle does not provide networking (Wi-Fi, Bluetooth, cellular) — it is a charging and data-sync dock only. Devices must pair via your existing infrastructure (Zebra mobile device management platform, Zebra Mobility DNA, or third-party UEM) independent of the cradle.
What's in the Box
- 1x CRD-NGTC5N-5SC4B 4-Slot Charging Cradle
- 1x Power Supply
Frequently Asked Questions
Q: Will the CRD-NGTC5N-5SC4B work with TC51 or TC56 devices?
A: No. This cradle is designed specifically for TC53(e), TC58(e), and TC58(R) models. Older TC51 and TC56 units require different cradle models. Confirm your device models before ordering.
Q: Does the cradle support data synchronization while charging?
A: Yes. The cradle establishes both power and data connectivity, allowing you to sync logs, push firmware updates, or retrieve WMS data during the charge cycle.
Q: Is a separate power supply required, or is one included?
A: A power supply is included in the package. No additional sourcing required for standard deployments.
Q: Can I charge fewer than four devices at once?
A: Yes. You may charge one, two, three, or four devices simultaneously. The cradle does not require all four slots to be populated to operate.
Q: What is the typical charge time for a TC58 battery?
A: Charge time depends on the battery capacity and the charger's output amperage. Consult the TC58 datasheet or your mobile device management documentation for specific charge-cycle times. The cradle delivers standard charging current; express or fast-charge modes are not available.
Q: Is this cradle suitable for continuous 24/7 operation?
A: The cradle is designed for typical warehouse and logistics duty cycles (shift-based charging, multiple charge/discharge cycles per day). For extreme continuous-duty scenarios (always-on charging for stationary kiosks), consult the datasheet or contact the manufacturer to confirm thermal and longevity specifications.
Karl WilsonPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
I've deployed the CRD-NGTC5N-5SC4B into three warehouse operations in the past year. The core value is straightforward: four TC53/TC58 handhelds charging in parallel cuts your dock hardware footprint by 75% compared to slinging four individual chargers around. If you're running shift-based WMS operations — order picking, receiving, cycle counting — device battery life is often the binding constraint. A 4-slot cradle means you can rotate fresh units in and out between shifts without investing in a dozen individual chargers.
Technical Highlights:
- Simultaneous 4-Unit Charging: Each slot charges independently, so you're not bottlenecked by a single slow charger. Typical shift rotation is 30–45 minutes to fully top a TC58 battery; confirm exact times with your device documentation.
- Integrated Data Sync: Both power and data connectivity in one dock. Means you can push configuration pushes or pull audit logs during the charge cycle — saves overhead if you're running centralized mobile device management.
- Included Power Supply: Eliminates the "which power adapter goes with this cradle" guessing game. It's in the box; one less SKU to track in your warehouse inventory system.
Deployment Considerations:
- TC53/TC58 Only: This is not a universal multi-device dock. If you have legacy TC51 or TC56 units still in the field, they will not fit. Mixed-fleet environments need separate cradles — plan your hardware refresh carefully.
- Power Cord Management: A single power supply serves four slots, but you still need a clean AC outlet or power strip. In mobile operations (vehicles, temporary staging areas), verify power availability before committing to a 4-slot deployment rather than portables.
Deploy the CRD-NGTC5N-5SC4B wherever you have a stable dock location and at least three TC53/TC58 handhelds rotating through shifts. Warehouse receiving, order fulfillment, and retail backroom operations are the sweet spot. If your devices are mostly static (stationary scanners, kiosk terminals), consider fixed power supplies instead.
