Zebra PLS-105ATX LaserBand Original Labor & Delivery Wristband Pack

Overview

The Zebra PLS-105ATX LaserBand Original is a direct-print, self-laminating laser wristband designed specifically for Labor & Delivery departments where patient identification accuracy and wristband durability are non-negotiable. Each sheet produces two adult wristbands, two infant wristbands, and a crib card simultaneously — all from your existing laser printer, no dedicated wristband printer required. This 500-piece pack (PLS-105ATX, often searched as PLS 105ATX) is purpose-built to streamline patient admissions workflows while keeping printed data legible throughout a patient's stay.

Unlike thermal wristband systems that require a separate print device, the LaserBand Original prints barcodes, text, and patient data in a single laser print pass. That means admissions staff can generate a complete wristband set — adult bands, infant bands, and chart labels — without switching between printers or systems. For hospitals running high admissions volumes on the L&D floor, this consolidation alone removes a meaningful bottleneck.

Key Features

• Self-Laminating Seal: A patented laminating layer bonds over the printed surface after application, shielding patient data from moisture and hand sanitizers. In clinical environments where bands are exposed to repeated handwashing, gloves, and antiseptic products, this protection directly extends wristband readability — reducing the need to reprint and re-apply bands mid-stay.
• Full Sheet Multi-Output: Each sheet simultaneously yields 2 adult wristbands, 2 infant wristbands, and a crib card. This single-print approach links mother and infant identification records in one workflow step, reducing the chance of a missing or mismatched infant band at admission.
• Tamper-Evident Adhesive Closure: The adhesive closure is designed to show visible evidence of tampering if a band is removed and reapplied — an important security layer in any patient identification program where band integrity must be verifiable by staff.
• Compatible with Existing Laser Printers: No capital investment in a dedicated printer. The PLS-105ATX runs through standard laser printers already deployed in the facility, lowering the barrier to deploying a barcoded wristband program on L&D units.
• Adhesive-Free Edges and Holes: Form edges and punch-holes are kept adhesive-free to prevent printer jams and reduce toner contamination on the print path. This is a practical design detail that matters in high-volume print environments — fewer jams means fewer service calls and less downtime.
• Chart Hole-Punch Compatible: The wristband sheet includes pre-punched holes for direct filing into patient charts, keeping the printed record with the patient file without any manual trimming or preparation.
• Latex-Free Construction: Eliminates latex as a patient allergy risk at the wristband application point — a standard requirement for clinical-grade patient identification products.
• 500-Piece Pack: Sold in a pack of 500 sheets, each yielding a complete set of wristbands and a crib card. For an active L&D unit, this quantity supports meaningful stock depth without excessive on-floor storage.

Integration & Compatibility

The LaserBand Original is designed to integrate into existing hospital admissions workflows without requiring new hardware. Because it prints through standard laser printers, it works alongside existing patient management and admissions software that already drives laser print jobs. Facilities already printing patient labels on laser media can extend that same printer to produce wristbands and crib cards — keeping the print queue unified and the training footprint minimal. The simultaneous adult, infant, and crib card output is specifically structured for Labor & Delivery protocols where mother-infant matching is a Joint Commission-recognized patient safety requirement.

Frequently Asked Questions

Q: Does the PLS-105ATX require a special printer or dedicated wristband printer?

A: No. The PLS-105ATX is designed to run through standard laser printers already in use. No separate wristband printer is required, which is a core advantage of the LaserBand Original design.

Q: What does each sheet in the PLS-105ATX pack produce?

A: Each sheet produces 2 adult wristbands, 2 infant wristbands, and a crib card — all printed simultaneously in a single laser print pass.

Q: How does the self-laminating seal protect patient data?

A: After the wristband is applied to the patient's wrist, the patented self-laminating layer seals over the printed surface, protecting the text and barcodes from moisture, hand sanitizers, and abrasion — common causes of wristband degradation in clinical settings.

Q: Is the PLS-105ATX latex-free?

A: Yes. The LaserBand Original wristbands are latex-free, making them suitable for patients with latex sensitivities.

Q: How many wristband sets does the 500-piece pack provide?

A: The pack contains 500 sheets. Each sheet yields a complete set: 2 adult wristbands, 2 infant wristbands, and 1 crib card, so 500 sheets support 500 complete L&D patient identification sets.

Q: Is the PLS-105ATX tamper-evident?

A: Yes. The adhesive closure is tamper-evident — if a band is removed and someone attempts to reapply it, the closure will show visible signs of tampering, supporting band integrity verification by clinical staff.

Marty Allison

The PLS-105ATX sits in an interesting product category for us — it's not a camera or a network device, but hospital patient identification is a physical security function, and the LaserBand Original solves a real operational gap. The key spec here is the single-sheet output: 2 adult bands, 2 infant bands, and a crib card, all printed in one laser pass. That single-print workflow is what makes this worth looking at seriously for L&D units already running laser print infrastructure.

Technical Highlights:

• Patented Self-Laminating Seal: The laminate bonds after wristband application, sealing printed barcodes and text against moisture and hand sanitizers — two of the primary causes of wristband data degradation in clinical settings. If you've had staff reprinting bands mid-shift because the barcode scanned poorly, this is the feature to evaluate.
• Adhesive-Free Edges and Hole Zones: This is a detail that matters at scale. Adhesive residue on punch holes and form edges is a primary driver of laser printer jams and fuser contamination. The PLS-105ATX removes adhesive from those zones, which reduces maintenance calls and keeps print throughput consistent on busy admissions shifts.
• 500-Sheet Pack Depth: At 500 sheets — each producing a complete L&D identification set — this pack supports meaningful admissions volume before restocking. For high-census units, that reduces the frequency of supply interruptions during active shifts.

Deployment Considerations:

• Verify that your facility's laser printer model is confirmed compatible with the LaserBand sheet format before deploying at scale — sheet dimensions and feed path tolerances vary by printer; run a small test batch first.
• The self-laminating seal requires correct wristband application technique to activate properly; if clinical staff are not trained on the application process, the laminate may not seal fully, reducing the moisture protection the design relies on.

The PLS-105ATX is the right specification for Labor & Delivery departments running existing laser print infrastructure that want to add barcoded mother-infant identification without buying dedicated wristband printers — particularly in facilities where Joint Commission patient safety standards for newborn identification are under active audit.