Vertiv Wmfp 6UX22.62X17.12 75 CFM FAN Gray - GL06WMFP-B-AF

Vertiv GL06WMFP-B-AF 6U Wall Mount Flat Pack Rack Enclosure

Overview

The Vertiv GL06WMFP-B-AF is a 6U wall mount flat pack rack enclosure designed to house network, power, and security equipment in space-constrained environments where a full floor-standing rack is impractical. If you're deploying IDF closets, edge network nodes, or small security head-end rooms, this unit solves the familiar problem of needing structured equipment housing without dedicating floor space to a full cabinet. The GL06WMFP-B-AF ships in flat-pack form, which meaningfully reduces freight damage risk and simplifies getting the enclosure through a doorway or up a stairwell before assembly on-site.

The enclosure is rated at 6U — enough capacity to mount a small PoE network switch, a patch panel, and a compact NVR or power distribution unit in a single organized wall installation. The gray finish is standard for infrastructure environments and blends into typical IDF/MDF wall installations without drawing attention.

Key Features

• 6U Wall Mount Form Factor: Six rack units of usable space means you can fit a compact NVR, a PoE switch, and a patch panel in a single wall-mounted footprint — eliminating the need for a floor-standing rack in small closets or hallway IDF locations. Pair this with a network video recorder for a clean, consolidated head-end install.
• Flat Pack Shipping: The flat-pack design ships unassembled, which reduces freight volume and damage risk — a practical advantage when the enclosure needs to travel through tight corridors or up elevator banks before reaching the final install location. Field assembly is straightforward with standard hand tools.
• Wall and Rack Mount Compatibility: Supports both wall mount and rack mount configurations, giving installers flexibility to adapt to the physical constraints of the installation site without sourcing a different enclosure model. This dual-mount capability is useful when a project scope changes between design and install phases.
• Gray Finish: The standard gray color matches the majority of Vertiv infrastructure products and common IDF/MDF color conventions — no special paint or finishing required for professional-looking installations.
• Airflow Configuration: Listed with a clear (non-fan) airflow path, which keeps the unit passive and eliminates fan noise and fan-failure maintenance concerns. Appropriate for low-heat-load deployments; evaluate your equipment's thermal output before selecting this enclosure for high-density or high-wattage gear.

Integration and Compatibility

The GL06WMFP-B-AF (often searched as GL06WMFP B AF) is designed to accept standard 19-inch rack-mount equipment. At 6U, it is well-suited to compact PoE switches, 1U patch panels, small NVRs, and UPS units commonly deployed in physical security head-end installations. The flat-pack assembly and wall-mount hardware are included with the unit per Vertiv's standard product configuration for this enclosure family. Confirm equipment depth compatibility before ordering — wall mount enclosures have shallower depth constraints than floor-standing cabinets, and the GL06WMFP-B-AF should be verified against the depth of your deepest rack-mount component.

Frequently Asked Questions

Q: What does the 6U rating mean for the GL06WMFP-B-AF?

A: 6U refers to six rack units of usable vertical space inside the enclosure. Each rack unit is 1.75 inches (44.45mm) tall, so 6U provides approximately 10.5 inches of equipment mounting space — enough for a compact NVR, a PoE switch, and a patch panel in a typical small security or network IDF installation.

Q: Does the GL06WMFP-B-AF include a cooling fan?

A: No. The GL06WMFP-B-AF is configured with a passive (non-fan) airflow path. It relies on natural convection rather than active cooling. This is appropriate for low-to-moderate heat-load equipment but should be evaluated carefully if you plan to install high-wattage gear that requires active airflow.

Q: Can the GL06WMFP-B-AF be rack-mounted instead of wall-mounted?

A: Yes. The enclosure supports both wall mount and rack mount configurations, giving you installation flexibility if the deployment environment changes between design and implementation.

Q: What does flat-pack mean for shipping and installation?

A: Flat-pack means the enclosure ships unassembled in a compact, flat box. This reduces shipping volume and makes it easier to transport the enclosure through tight spaces like stairwells or narrow corridors before on-site assembly. Field assembly requires standard hand tools.

Q: What size equipment does the GL06WMFP-B-AF accept?

A: The GL06WMFP-B-AF accepts standard 19-inch rack-mount equipment. Verify the depth of your equipment against the enclosure's internal depth specification before finalizing your equipment selection, as wall mount enclosures are typically shallower than floor-standing cabinets.

Ted Perry

The GL06WMFP-B-AF is a 6U passive wall mount enclosure — and that passive airflow configuration is the first thing I tell installers to evaluate before committing to it. No fan means no moving parts to fail and no noise, which is exactly right for a small IDF or security head-end closet running a switch and a compact NVR at modest wattage. Push a high-density PoE switch with a fully-loaded port count into this box and you'll want to verify the thermal math before closing the door.

Technical Highlights:

• 6U Capacity: Six rack units is a practical sweet spot for small edge deployments — fits a 1U patch panel, a compact managed switch, and a 1U NVR without forcing you into a much larger floor-standing cabinet footprint.
• Passive Airflow: No fan unit means zero fan noise, zero fan maintenance cycles, and no fan-failure service call. For low-heat deployments in occupied spaces (reception areas, small server closets near offices), this matters more than installers often anticipate upfront.
• Flat-Pack Configuration: Ships unassembled — a genuine advantage on multi-floor projects where getting a pre-assembled metal cabinet into a finished space without damaging walls or doors is a real logistical challenge.

Deployment Considerations:

• Confirm wall anchor ratings against the populated weight of your equipment before mounting — a fully-loaded 6U enclosure with a switch, NVR, and UPS can exceed 40–60 lbs depending on gear, and wall substrate matters significantly.
• The passive airflow path means ambient room temperature directly affects equipment operating temperature — in warm mechanical rooms or unconditioned spaces, active cooling or a vented alternative should be considered instead of this model.

This enclosure is the right call for small physical security head-end installations — a camera system NVR, a PoE switch, and a patch panel in a single organized wall mount, in a conditioned space where passive cooling is adequate and floor space is at a premium.