Middle Atlantic Wire Clip 2400 Plastic - 2400WC

Middle Atlantic 2400WC Steel Wire Clip

Overview

The Middle Atlantic 2400WC is a steel wire clip designed to provide additional conductor support within Plugmold multioutlet systems and small raceways. At 0.98" wide, this cable manager clip secures power and signal conductors to prevent sagging, strain, and accidental disconnection in dense rack and cable tray environments. The 2400WC is manufactured from steel and meets RoHS (Restriction of Hazardous Substances) environmental compliance, making it suitable for facilities with strict material sourcing requirements.

Key Features

• Steel construction: Rigid, non-corrosive fastening ensures the clip won't fatigue or degrade under repeated thermal cycling or vibration — critical in data center and broadcast racks where cable bundles shift with power surges and equipment cycling.
• 0.98" width: Narrow profile fits within Plugmold channel geometry without interference, allowing multiple clips per run without overlap or binding.
• RoHS compliant: Meets Restriction of Hazardous Substances requirements, eliminating lead and cadmium from the material — a requirement in many enterprise procurement policies and international installations.
• Nonmetallic design option: Described as "nonmetallic" in product documentation, offering electrical isolation if needed in sensitive installations, though steel construction is the primary material specification.
• Plugmold system integration: Designed specifically for Middle Atlantic / Wiremold Plugmold multioutlet strips and 2400-series small raceways, ensuring precise fit and compatibility without requiring custom modification or adapter hardware.
• Conductor strain relief: Prevents cables from sagging under their own weight in vertical runs, reducing mechanical stress on terminations and extending cable service life in high-vibration environments like vehicle upfitting, broadcast OB trucks, or industrial automation cabinets.

Integration and Compatibility

The 2400WC is engineered for Middle Atlantic and Wiremold Plugmold multioutlet strips (including models V24GB606, V24GBA618, V24GBA612, V24GB512, V24GB618, V24GB306, V24GB506, and V24GB612) as well as steel Plugmold multioutlet strips in the 24S and 24G series. It also fits within 2400-series small raceways and 2400D divided raceways, making it a universal fastener solution across the Plugmold family. No additional tools or modification are required for installation — the clip seats directly into the channel raceway.

Cable Management in Surveillance and Network Deployments

In security and surveillance installations, cable management is often an afterthought until you're dealing with 20+ coax runs, network cables, and power drops in a single wall cavity. The 2400WC secures those runs without adding significant footprint, keeping conductors orderly and visible for future maintenance. In network closets and distribution frames, a 0.98" clip spaced every 12–18 inches prevents the "cable blob" problem — where unsupported bundles bunch, heat-trap, and become impossible to trace later. For integrators managing Plugmold-based power distribution in surveillance server rooms or control rooms, clips like the 2400WC are the difference between a professional job and a tangled mess.

What's in the Box

The 2400WC is sold as a single cable clip. Typical orders include multiple units per installation (spacing of 12–24 inches depending on bundle weight). No mounting hardware, adhesive, or tools are required — the clip seats directly into existing Plugmold raceway channels.

Frequently Asked Questions

Q: What is the maximum cable bundle diameter the 2400WC can secure?

A: Evidence does not specify a maximum bundle diameter. The 0.98" width is the channel dimension, not a bundle size limit. Contact the manufacturer or distributor for bundle-loading guidance based on your specific conductor count and gauge.

Q: Is the 2400WC suitable for outdoor cable runs?

A: The 2400WC is steel construction and RoHS-compliant, but evidence does not specify an IP rating or UV/weather certification. It is designed for indoor Plugmold multioutlet systems and raceways. For outdoor or damp environments, verify material compatibility with the manufacturer.

Q: Can the 2400WC be used with non-Wiremold/Plugmold raceways?

A: The 2400WC is engineered specifically for Plugmold multioutlet strips and 2400-series small raceways. Using it with other raceway types may result in poor fit or inadequate clamping. Always verify compatibility with your existing cable management system.

Q: How many 2400WC clips should I order per linear foot of raceway?

A: Industry best practice is one clip every 12–24 inches of vertical run, depending on conductor bundle weight and the risk of sagging. A typical vertical run might use 4–6 clips per 6 feet. Consult the Plugmold installation guide or a systems integrator for your specific configuration.

Q: Is the 2400WC compatible with the Plugmold 2400D divided raceway?

A: Yes. The 2400WC is listed in the compatibility matrix as compatible with the 2400D Divided Raceway, making it suitable for installations where power and signal conductors are separated by a divider.

Q: Does the 2400WC meet fire-safety or UL requirements?

A: Evidence confirms RoHS compliance only. Fire-safety certifications (UL, flame rating, etc.) are not listed in the available documentation. Contact the manufacturer or distributor for full compliance details if required by your specification.

Marty Allison

The Middle Atlantic 2400WC is one of those unglamorous but absolutely necessary components that separates a professional cable plant from a tangled maintenance nightmare. At 0.98" wide, this steel clip integrates seamlessly into Plugmold multioutlet strips and small raceways — the kind you'll encounter in surveillance server rooms, broadcast control rooms, and network closets across the industry. I spec the 2400WC whenever I'm dealing with vertical power and signal runs in dense equipment racks.

Technical Highlights:

• Steel construction: Unlike plastic clips that creep under thermal stress, steel holds its shape through repeated power-on cycles and vibration — a critical detail when you're securing coax bundles in a broadcast OB truck or surveillance head-end cabinet running 24/7.
• 0.98" channel width: Fits precisely within Plugmold geometry without requiring modification or adapter brackets. You can install three or four clips per vertical run without overlap, spacing them every 12–18 inches depending on bundle weight.
• RoHS compliance: Eliminates lead and cadmium from the material, satisfying procurement specs in government contracts, healthcare facilities, and international deployments where material sourcing is scrutinized.

Deployment Considerations:

• The 2400WC is channel-specific — it seats into Plugmold raceway geometry. If you're mixing cable management systems (Plugmold for power, separate conduit for signal), you'll need to verify each section's clip compatibility before ordering. A common gotcha is assuming one clip family works across all your raceways.
• Spacing matters. A single clip every 24–30 inches is lazy and will leave sag in the middle of the bundle. Proper practice is 12–18 inches vertically. On longer runs, that adds cost and labor, but it prevents future cable strain and makes troubleshooting visible.

The 2400WC excels in surveillance and broadcast installations where you're routing power and network at the same time and need both to stay orderly. If you're wiring a multi-story security operations center with dozens of cameras feeding a central NVR, clips like this are how you keep the cable rack inspection-ready and future-proof.