Wasp 633809013409 WPL308Plus Print Head Module (203 DPI)

Wasp 633809013409 WPL308Plus Print Head Module (203 DPI)

Overview

The Wasp 633809013409 is a replacement print head module rated for 203 DPI operation on the WPL308Plus thermal printer. This module controls direct-thermal printing resolution and must be matched to your printer's configured DPI setting — mixing 203 DPI heads with 300 DPI firmware (or vice versa) will produce degraded print quality or feed errors. It is a field-replaceable wear component; thermal print heads degrade with use, so planned replacement extends device life and maintains barcode scan reliability.

Compatibility

This module is compatible exclusively with the Wasp WPL308Plus thermal printer. The 633809013409 designation confirms 203 DPI resolution — do not substitute with 300 DPI variants if your printer is configured for 203 DPI output, as resolution mismatch causes misaligned or unreadable barcodes.

Installation Notes

Print head replacement requires thermal printer shutdown and a cool-down period (typically 10–15 minutes after last print job). Follow Wasp's service documentation for head removal, cleaning contacts, and seating the new module to avoid ribbon misalignment. Improper seating will cause print streaks or feed jams. After installation, run a self-test print to confirm head contact and resolution before resuming production barcode runs.

What's in the Box

• 1x Print Head Module (203 DPI)