Wasp 633808920319 AC Power Supply for HC1/DR3 and WDT3200 DR4 Cradle
Overview
The Wasp 633808920319 is a dedicated AC power supply designed to feed 3V AC output to Wasp mobile computing and barcode printing peripherals, specifically the HC1/DR3 docking station and the WDT3200 DR4 cradle. This unit is factory-new and sourced direct from the manufacturer, ensuring genuine components and a full US warranty path.
Specifications & Deployment Benefits
- Output Voltage: 3V AC — direct compatibility with HC1/DR3 and WDT3200 DR4 cradle dock electronics. No adapters or step-down modules needed; dock and charger will recognize the supply immediately.
- AC Input: Standard AC mains connection. Eliminates the need to source a replacement from secondary channels or improvise with mismatched voltage regulators, which would void equipment warranty and risk dock failure.
- Genuine OEM Component: Direct manufacturer sourcing ensures pinout, connector type, and voltage regulation meet Wasp specifications. Counterfeit or mismatched supplies are a common cause of intermittent charging failures and cradle malfunction in high-volume warehouse deployments.
Compatibility & Integration
This supply is confirmed compatible with:
- Wasp HC1/DR3 docking station
- Wasp WDT3200 mobile computer and DR4 charging cradle
If you operate a fleet of WDT3200 mobile computers with multi-unit charging cradles, having a spare or replacement 633808920319 supply on hand reduces downtime when a primary supply fails. Warehouse automation and logistics environments depend on continuous device availability — a dead cradle supply can idle an entire mobile computing station.
Why This Matters for Your Deployment
Barcode scanner cradles and mobile computer docks operate mission-critical in warehouse, picking, and shipping environments. A failed power supply stops the device from charging overnight and forces technicians to troubleshoot dock connectivity during peak shifts. The Wasp 633808920319 is a direct replacement — swap it in, power on, and resume charging without reconfiguration. No guesswork on voltage or connector compatibility.
Warranty & Support
Factory-new with full US warranty coverage, sourced direct from the manufacturer or authorized US distributor. This avoids the risk of grey-market or refurbished units that may carry hidden defects or no recourse.
When to Order This Unit
- Your existing HC1/DR3 or WDT3200 DR4 cradle power supply has failed or shows intermittent charging.
- You're deploying a second docking station and need a dedicated supply to avoid unplugging and moving cables between locations.
- Your organization maintains a spare-parts inventory for Wasp mobile devices and wants to stock a genuine replacement before a failure impacts operations.
Frequently Asked Questions
Q: Is this the correct replacement if my WDT3200 cradle won't charge?
A: The Wasp 633808920319 (model 633808920319) is the OEM power supply for HC1/DR3 and WDT3200 DR4 cradles. If your cradle is not charging, confirm the existing supply is unplugged and test with this unit. If charging still fails, the cradle dock connector may be damaged — contact Wasp support or a qualified integrator to confirm.
Q: Can I use this supply with other Wasp docking stations?
A: No. This is designed specifically for HC1/DR3 and WDT3200 DR4 cradles. Using it with other models risks connector or voltage mismatch. Always verify the model number on your cradle before ordering.
Q: What's the warranty on the 633808920319?
A: This is factory-new with full US manufacturer warranty. Consult your receipt or contact the supplier for specific warranty terms and claim procedures.
Q: Does this come with a cable or connector?
A: The unit is a power supply with standard AC input. The connector to the cradle is integrated; no external cable assembly is required.
The Wasp 633808920319 is a straightforward but essential replacement — a 3V AC power supply for cradle docking stations used in warehouse automation. In my experience, power supply failures are often overlooked until a charging station goes dark, and then you're scrambling to find the correct OEM unit while mobile computers sit uncharged overnight. Having the correct model number matters.
Technical Highlights:
- 3V AC Output: Exact voltage match for HC1/DR3 and WDT3200 DR4 cradles — no voltage regulation issues or connector incompatibilities that come from using generic supplies.
- Direct Manufacturer Sourcing: OEM component means the pinout, amperage capacity, and connector type are guaranteed to spec. Counterfeit supplies in the secondary market are a real issue in mobile device logistics and often cause intermittent charging or dock lockups.
- Factory-New with Warranty: Full US warranty path avoids the risk of refurbished or grey-market stock that may have hidden defects and zero recourse if it fails in the field.
Deployment Considerations:
- Keep a spare on hand in high-volume warehouses. If you operate ten or more WDT3200 devices with multiple cradles, a single failed supply can idle an entire charging station and disrupt end-of-shift device management.
- Confirm your existing cradle model is HC1/DR3 or WDT3200 DR4 before ordering. Other Wasp docking stations use different supplies, and voltage mismatch will damage both the supply and the dock connector.
For warehouse integrators managing fleets of Wasp mobile computers, the 633808920319 is a must-stock item. It's not glamorous, but a failed cradle supply costs you more in unplanned downtime than the cost of the replacement itself.
