Lifesafety Power

SKU: FPV4-R8E1

Lifesafety Power FPV4-R8E1 4A 8 Lock Outputs

• 4A at 12VDC across 8 relay outputs supports up to eight mag locks independently.
• Per-output fusing and supervision enables granular door-level fault diagnostics.
• 75W, 120VAC input simplifies single-enclosure power management for multi-door installs.

Lifesafety Power

SKU: FPV6-B100E1

Lifesafety Power FPV6-B100E1 4A/12V 4A/24V

• Dual-rail 12 VDC and 24 VDC outputs at 4 A each eliminate a second power supply.
• 48 W on 12 V and 96 W on 24 V rails support cameras, readers, and door strikes.
• Compact wall-mount form factor suits single-door and small-system access deployments.

Lifesafety Power

SKU: FPV6-D8E1

Lifesafety Power FPV6-D8E1 6A 8 Auxillary Outputs

• 6A regulated output prevents voltage droop when camera resets and door strikes overlap.
• 8 independently supervised outputs let you isolate faults per device without system-wide impact.
• Battery backup integration enables graceful degradation so access control stays active during outages.

Lifesafety Power

SKU: FPV6-E1

Lifesafety Power FPV6-E1 FPV6-E1

• Supervised outputs detect open circuits, shorts, and power faults per zone.
• Designed for DIN rail or panel-mount integration in commercial security builds.
• Supports multi-zone power distribution for access control and alarm systems.

Lifesafety Power

SKU: FPV6-R8E1

Lifesafety Power FPV6-R8E1 6A 8 Lock Outputs

• Eight independent lock outputs isolate faults, preventing a single failure from cascading.
• 6A total capacity supports up to eight electric locks, mag-locks, or door strikes.
• Dedicated per-output power routing eliminates voltage sag across neighboring doors.

Lifesafety Power

SKU: K1E4-DOOR-BOXED

Lifesafety Power K1E4-Door-Boxed K1E4-Door-Boxed

• Operates at 24VDC to match standard electrified lock and reader voltage requirements.
• Centralizes door power distribution, reducing wiring complexity in multi-door deployments.
• Dedicated supply isolates door control power from the access panel for cleaner fault isolation.

Lifesafety Power

SKU: RC250B-C16P

Lifesafety Power RC250B-C16P RC250B-C16P

• 16 independent supervised outputs let you isolate faults without taking down the full system.
• 250W at 24VDC supports mixed loads across cameras, readers, and strike locks from one enclosure.
• 230VAC input suits international and commercial-grade electrical panels without a step-down transformer.

Lifesafety Power

SKU: RC75-C8

Lifesafety Power RC75-C8 75W Single Voltage 120VIN

• 75W output supports 4–6 PoE cameras (10–15W each) or mixed camera and door-strike loads.
• 120VAC single-voltage input eliminates selector switches, simplifying field installation and verification.
• Compact enclosure fits DIN rail or fixed cabinet mounting, reducing footprint in crowded closets.

Lifesafety Power

SKU: RD150B-16

Lifesafety Power RD150B-16 RD150B-16

• 16 supervised outputs detect wiring faults or load disconnects per channel.
• 300W at 24VDC supports medium-to-large campus access control and alarm loads.
• Per-output supervision cuts troubleshooting time and reduces unplanned downtime.

Lifesafety Power

SKU: RGA-XZ1-BOXED

Lifesafety Power RGA-XZ1-BOXED Boxed Power Systems 120 VAC 50/60

• Accepts 120VAC 50/60Hz mains input for standard North American cabinet installs.
• Boxed enclosure centralizes power distribution, reducing cable clutter in rack deployments.
• Single enclosure manages multiple downstream devices for surveillance and access control.

Lifesafety Power

SKU: RGA75-C8Z

Lifesafety Power RGA75-C8Z RGA75-C8Z

• 75W redundant output sustains access control and security loads without interruption.
• Dual independent 120 VAC inputs auto-switch to eliminate single points of mains failure.
• Integrated battery supervision enables remote monitoring of backup battery health and charge.

Lifesafety Power

SKU: RGM75B-C8PZ

Lifesafety Power RGM75B-C8PZ RGM75B-C8PZ

Lifesafety Power

SKU: RGS250-4D8

Lifesafety Power RGS250-4D8 GEMINI RG Rackmont

• Delivers 250W at 24VDC for multi-camera or access control loads from one rack unit.
• Rackmount form factor consolidates DC power alongside NVRs, switches, and control panels.
• Centralized fused distribution reduces voltage sag across distributed 24VDC endpoints.

Lifesafety Power

SKU: RGXM150-C8D8P

Lifesafety Power RGXM150-C8D8P 150W Single Voltage 120 VAC 8 Rel

• 150W at 120 VAC input consolidates power for up to 8 relay and 8 auxiliary outputs.
• 8 dry-contact relay outputs drive door strikes, locks, or alarm devices without adapters.
• 12 VDC regulated output supports multi-point access control and surveillance loads cleanly.

Lifesafety Power

SKU: RGXM150B-C8D8PZ1

Lifesafety Power RGXM150B-C8D8PZ1 RGXM150B-C8D8PZ1

• 150W regulated output maintains stable DC voltage across mixed-device security loads.
• Centralized power distribution eliminates individual supplies at each endpoint device.
• Regulated design prevents voltage sag on analog CCTV and access control circuits.

Lifesafety Power

SKU: SD16-BOXED

Lifesafety Power SD16-BOXED 16 output network managed output boar

• 16 independently monitored outputs enable per-outlet fault detection without panel inspection.
• Remote outlet switching reduces truck rolls on distributed camera and access control installs.
• Single managed interface consolidates power supervision across multi-device IP security networks.