HES

SKU: 10620435

Hes Sb:1006-F-12/24D-629-Lbm - 10620435

• Dual 12/24V DC field-selectable voltage eliminates panel compatibility guesswork on retrofits.
• LBM latch bolt monitor delivers real-time door position feedback to your access control system.
• UL 1034 and UL 10C 3-hour fire-rated; 1,000,000-cycle endurance suits high-traffic deployments.

HES

SKU: 10620442

Hes Sb:1006-F-12/24D-629-Lbsm - 10620442

• Dual 12/24V DC field-selectable input eliminates power supply swaps on mixed-voltage installs.
• UL 1034 and UL 10C (3-hr fire) listed; 1,500 lb static strength for perimeter door compliance.
• Integrated LBSM delivers real-time latch status to access control panels without add-on hardware.

HES

SKU: 10620429

Hes Sb:1006-F-12/24D-630-Lbm - 10620429

• Dual 12/24 VDC field-selectable voltage eliminates panel compatibility issues on retrofits.
• UL 1034 and UL 10C (3-hr fire) listings satisfy code requirements for commercial openings.
• LBM latch bolt monitor delivers real-time door-state feedback for accurate access control audit trails.

HES

SKU: 10620436

Hes Sb:1006-F-12/24D-630-Lbsm - 10620436

• 12/24V DC field-selectable input eliminates separate power supplies on mixed-voltage panels.
• LBSM monitor delivers real-time latch and door status feedback directly to access control panels.
• UL 1034 and UL 10C (3-hr fire) listed; 1,500 lb static strength across a 1,000,000-cycle rated body.

HES

SKU: 10620423

Hes Sb:1006-F-12/24D-Blk - 10620423

• Accepts 12VDC or 24VDC input, eliminating the need to stock separate voltage SKUs.
• Fail-secure design keeps the door locked during power loss, maintaining site security.
• Field-reversible faceplate and ANSI 1-1/4"×4-7/8" cutout simplify on-site retrofits.

HES

SKU: 10620430

Hes Sb:1006-F-12/24D-Blk-Lbm - 10620430

• Fail-secure operation keeps the door locked during any power loss or system failure.
• Dual-voltage 12V/24V DC input eliminates power supply conflicts across mixed-voltage installs.
• Black finish integrates discreetly into dark-toned frames and architectural hardware.

HES

SKU: 1006CS-630-LBSM

Hes Strike - 1006CS-630-Lbsm

• Fail-secure mode keeps the door locked on power loss, protecting perimeter openings.
• LBSM dual sensing reports latchbolt and keeper state to panels for verified audit trails.
• 1,000,000-cycle rating and UL 1034/UL 10C listings support high-traffic commercial installs.

HES

SKU: 1006CS-F-12/24D-630

HES strike - 1006CS-F-12/24D-630

• Dual 12/24V DC auto-sensing eliminates wiring errors across mixed-voltage panel installations.
• 1,500 lb static strength with UL 1034 and UL 10C (3-hr fire) listings meets code on rated doors.
• 1,000,000-cycle endurance rating and continuous-duty solenoid reduce maintenance on high-traffic openings.

HES

SKU: 10270051

HES Strike Latch Guard for HES 1006/5000/5200 - 10270051

• Protects HES 1006, 5000, and 5200 series strike cavities from forced-entry tampering.
• Stainless steel construction with US32D/630 finish suits exterior and high-traffic installs.
• Retrofits onto existing HES strike deployments without replacing the strike assembly.

HES

SKU: 10305--------00

HES Stromuebertraeger 2 -pole 10305 - 10305--------00

• 2-pole sliding contact eliminates hinge-side wiring fatigue on high-cycle doors.
• Maintains circuit integrity through thousands of cycles without connection degradation.
• Compact form factor fits standard door frame preps for clean, low-maintenance installs.

HID

SKU: 085625

HID 085625 USB 2.0 High Speed Interface Cable 6 Ft

6ft USB 2.0 cable for HID access control readers and controllers

• USB 2.0 High Speed protocol ensures reliable data transfer to HID readers and controllers.
• 6-foot length supports field retrofits and extended runs beyond standard equipment packaging.
• 2-year warranty backs plug-and-play deployment across door access and credential management sites.

HID

SKU: 088933

HID 088933 HDP Printhead Cleaning Kit with 4 Swabs

4-swab printhead cleaning kit for HID HDP card printers

• Four HDP-specific swabs safely remove debris without risking printhead coating damage.
• Regular use extends printhead service life, reducing costly unplanned replacements.
• Conforms to HID maintenance protocols, preserving printer warranty coverage.

HID

SKU: 096091

HID 096091 HDP5000E Printhead Kit

Genuine HID printhead kit for HDP5000E dye-sublimation card printers

• 300 dpi / 16.7M-color output maintains ID card print quality on HDP5000E fleets.
• Genuine HID component carries a 2-year warranty, reducing fleet maintenance risk.
• CR-80 format support ensures compatibility with standard corporate and gov ID stock.

HID

SKU: 47500

HID 47500 DTC Print Head

Genuine thermal print head for DTC1000 and DTC4000 card printers

• Drops into DTC1000 and DTC4000 printers with no firmware updates or recalibration.
• Factory-calibrated 300 DPI thermal element installs in under 15 minutes via integrated pins.
• IP55-rated assembly operates from -35°C to +65°C, backed by a 2-year warranty.

HID

SKU: D910052

HID D910052 Printhead Motor Mount Assembly

Precision printhead motor mount for HID card printer alignment

• Printhead motor mount assembly for HID card printers
• IP55-rated construction for production environments
• OEM replacement maintains print alignment quality

Honeywell

SKU: 1-010106-900

Honeywell 1-010106-900 Replacement Printhead

OEM thermal printhead for Honeywell industrial label and barcode printers

• Genuine Honeywell replacement part maintains original print quality and resolution
• Direct compatibility with Honeywell industrial printer systems, easy swap installation
• Restores functionality in high-volume printing operations to reduce downtime