Vertiv VRX-59U2436-B-1224 59U Open Frame Rack Enclosure
Overview
The Vertiv VRX-59U2436-B-1224 is a 59U open-frame rack designed for data center, server room, and network infrastructure deployments where maximum vertical density and flexible equipment mounting are the priorities. At 59U, this rack provides enough vertical space to consolidate a large number of 1U and 2U servers, patch panels, and network switches into a single footprint — reducing floor space requirements while keeping everything accessible. The VRX series from Vertiv is engineered for commercial and enterprise environments where structural rigidity and long-term serviceability matter. Explore the full Vertiv infrastructure catalog for compatible power, cooling, and cable management accessories.
Key Features
- 59U Vertical Capacity: 59U of usable rack space lets you populate a full-density server build — enough for 59 × 1U devices or a mixed stack of servers, patch panels, and power distribution units without hitting a headroom ceiling mid-project.
- Dual Mounting Rail Standards — #12-24 Tapped and 3/8" Square (M6): Supporting both #12-24 tapped rails and 3/8" square-hole (M6) mounting means you can install virtually any rackmount hardware without sourcing adapter rails or specialty hardware — a real time-saver during dense rack builds that mix vendor equipment.
- Black Finish: The black powder-coat finish is standard for modern server racks and network cabinets, blending into data center floor environments and reducing visible heat shimmer from lighting.
- 24-Inch Width Form Factor: The 24-inch wide footprint is the standard for mid-density deployments — wide enough to accommodate full-depth servers and cable management arms, while fitting within standard raised-floor tile grids and hot-aisle/cold-aisle containment configurations.
- Depth Adjustability (24–36 Inch): Rail depth adjustable from 24 to 36 inches accommodates shallow networking gear as easily as deep 2U/4U servers — useful in mixed-use racks where depth varies across equipment generations. Consult a data center planning guide for layout recommendations before finalizing rail positions.
- VRX Series Construction: The VRX line is Vertiv's commercial-grade open-frame rack family, built for deployments where front and rear access without removing a door is a workflow requirement — common in colocation, NOC, and high-density switching environments. Pair with compatible rack PDUs and cable management panels for a complete build.
Integration & Compatibility
The VRX-59U2436-B-1224's dual rail standard (both #12-24 tapped and M6 square-hole) covers the mounting formats used by virtually all major server, storage, and networking vendors. The 24–36-inch adjustable depth range accommodates both shallow patch panel builds and deep GPU or storage server chassis. Confirm rail depth adjustment range against your deepest chassis specification before ordering.
Frequently Asked Questions
Q: What mounting rail standards does the VRX-59U2436-B-1224 support?
A: The VRX-59U2436-B-1224 supports both #12-24 tapped rails and 3/8-inch square-hole (M6) rails, covering the two most common rackmount hardware standards.
Q: What is the depth range of the VRX-59U2436-B-1224?
A: The rack accommodates equipment from 24 to 36 inches in depth, making it suitable for both shallow networking gear and full-depth servers.
Q: What color is the VRX-59U2436-B-1224?
A: This SKU ships in black. The VRX series is also available in Winter White in alternate SKUs.
Q: How many rack units does the VRX-59U2436-B-1224 provide?
A: The VRX-59U2436-B-1224 provides 59U of usable mounting space.
Q: Is the VRX-59U2436-B-1224 an open-frame or enclosed rack?
A: The VRX is an open-frame rack design, providing unrestricted front, rear, and side access without doors or side panels — preferred in environments where cable access and airflow visibility are priorities.
The VRX-59U2436-B-1224 is the rack I reach for when a project calls for a single high-density vertical footprint without committing to a fully enclosed cabinet. That 59U height is the key spec here — it gives you room to run a fully populated server and switching build in one rack rather than splitting across two, which is the kind of decision that pays off every time someone has to trace a cable or swap a drive at 2am.
Technical Highlights:
- 59U Height: At 59U, this is one of the taller open-frame rack options in the VRX family — enough vertical capacity to run a full mixed-density build (servers, patch panels, PDUs, and switching) in a single footprint without running out of space mid-build.
- Dual Rail Standard (#12-24 + M6 Square): Supporting both tapped and square-hole mounting in the same rail eliminates the most common compatibility headache in mixed-vendor rack builds — you can mount Cisco, Dell, HPE, and third-party PDUs without sourcing specialty cage nuts or adapter kits.
- 24–36 Inch Adjustable Depth: The 12-inch depth adjustment range is wider than most competitive open-frame racks, giving you flexibility to install everything from 1U 10G switches (typically 17–20 inches deep) to full 4U storage servers (up to 35 inches) in the same enclosure.
Deployment Considerations:
- Open-frame racks require a separate cable management strategy — plan your vertical cable managers and horizontal lacing bars before the rack is populated, not after. Retrofitting cable management on a full 59U rack is a painful job.
- The 59U height exceeds standard 7-foot (42U) raised-floor tile spans — verify ceiling clearance and aisle overhead obstructions before delivery, particularly in older data halls with low plenum ceilings.
The VRX-59U2436-B-1224 is the right call for colocation cage builds and high-density NOC deployments where open access trumps physical security and you need every U counted before the project starts.
