Vertiv VP4N21A2-R - Power Distribution Unit - 1U - 200-240V - 3.3KW - U-lock IEC - CPQ-1086914-02

Vertiv CPQ-1086914-02 1U Rack Power Distribution Unit

Overview

The Vertiv CPQ-1086914-02 is a 1U rack-mount power distribution unit rated for 200–240V input and 3.3KW total load capacity. Designed for data center and network equipment rooms, it distributes power to rack-mounted devices via U-lock IEC outlets — a locking outlet format that prevents accidental cord pulls under load, a meaningful safeguard in high-density or mission-critical racks. If you're provisioning power for a surveillance NVR stack, a network switch shelf, or dense compute gear, this PDU fits the 1U form factor without consuming additional rack space beyond the standard single-rack-unit footprint.

Key Features

• 3.3KW / 200–240V Rated Capacity: Sized for moderate-density loads at international or step-down voltage — covers a typical mix of rack servers, NVRs, or network appliances without running near the breaker limit. Verify your actual connected load stays below 80% (2.64KW) per standard derate practice.
• U-Lock IEC Outlets: The U-lock mechanism physically retains IEC power cords, eliminating unintentional disconnects in vibration-prone environments or busy equipment rooms. This is particularly useful in racks accessed frequently by field technicians.
• 1U Rack Form Factor: A single rack unit of vertical space is preserved. In rack PDU planning, horizontal 1U models keep cabling accessible from the front or rear depending on orientation — confirm rear-mount clearance in your specific rack before ordering.
• 200–240V Input Range: Operates on the international standard voltage band, making the CPQ-1086914-02 suitable for deployments outside North America or for facilities using step-down/isolation transformers at 208V or 240V.

Integration & Compatibility

As a passive distribution unit, the CPQ-1086914-02 integrates with any rack equipment using IEC C13 or C19 power inputs — the U-lock IEC outlet format is compatible with standard IEC C14/C20 cords. Verify outlet count, outlet type (C13 vs C19), and phase configuration against your specific power cords and equipment before installation. Pair with a UPS upstream to add runtime protection. For managed power monitoring or remote outlet switching, a managed PDU variant would be required — this unit provides passive distribution only based on available evidence.

Frequently Asked Questions

Q: What input voltage does the CPQ-1086914-02 support?

A: The CPQ-1086914-02 is rated for 200–240V input, making it suitable for international deployments or facilities operating at 208V or 240V.

Q: What is the total power capacity of the CPQ-1086914-02?

A: The unit is rated at 3.3KW total capacity. Standard practice is to derate to 80% of capacity (approximately 2.64KW) for continuous loads.

Q: What type of outlets does the CPQ-1086914-02 use?

A: The CPQ-1086914-02 uses U-lock IEC outlets, which physically retain IEC power cords to prevent accidental disconnection.

Q: Does the CPQ-1086914-02 fit in a standard rack?

A: Yes — it is a 1U rack-mount PDU, occupying a single rack unit of vertical space in a standard 19-inch rack enclosure.

Q: Is the CPQ-1086914-02 a managed or monitored PDU?

A: Based on available product data, the CPQ-1086914-02 is a passive distribution unit. Managed features such as remote outlet switching or power monitoring are not confirmed for this model from available evidence.

James Everett

The CPQ-1086914-02 covers a straightforward but important role: distributing 200–240V power at up to 3.3KW across rack equipment using U-lock IEC outlets. The locking outlet design is the spec I'd flag first — in a surveillance or network closet where technicians swap gear regularly, a standard IEC cord can pull free under minimal force. U-lock eliminates that failure mode without requiring any tools or accessories.

Technical Highlights:

• 3.3KW at 200–240V: Covers moderate rack density at international or stepped-down voltage — appropriate for NVR shelves, PoE switch pairs, or a mix of rack appliances running continuously.
• U-Lock IEC Outlets: Physical cord retention prevents accidental power loss to connected equipment without requiring cable management accessories or zip ties as a workaround.
• 1U Form Factor: Minimal rack space impact — single rack unit leaves room for additional equipment in space-constrained deployments.

Deployment Considerations:

• Derate to 80% of rated capacity (approximately 2.64KW) for continuous loads — do not plan a rack that runs at 3.3KW sustained draw.
• Confirm outlet count and IEC outlet type (C13 vs C19) against your specific equipment before ordering — the product name confirms U-lock IEC format but does not specify outlet count from available evidence.

Best suited for international or 208/240V facility deployments where U-lock cord retention and a compact 1U footprint are the primary requirements — for example, a remote surveillance equipment rack in a facility that runs 230V mains with regular technician access.