Lifesafety Power

SKU: BX50-E5

Lifesafety Power BX50-E5 Standard Power Systems 50W Single Voltag

• 50W PoE budget supports 8–12 typical IP cameras (4–6W each) from a single unit.
• 802.3af/at PoE over Cat5e or better eliminates separate DC cable runs to edge devices.
• Compact form factor fits wall-mount cabinets and cramped electrical closets cleanly.

Lifesafety Power

SKU: C8P-BOXED

Lifesafety Power C8P-BOXED C8P-BOXED

• 8 independent 24VDC outputs consolidate backup power for cameras, readers, and sensors.
• Integrated battery backup keeps critical security devices online during AC mains loss.
• Boxed enclosure fits rack and wall-mount installs, reducing cabinet footprint and cable sprawl.

Lifesafety Power

SKU: D8-BOXED

Lifesafety Power D8-BOXED D8-Boxed 8 outputs fused at 3A each

• 8 independently fused 3A outputs prevent a single device fault from killing the entire system.
• Centralized boxed form factor consolidates power distribution into one enclosure-mounted unit.
• Supports up to 24A total capacity across mixed security devices from a single regulated source.

Lifesafety Power

SKU: D8P-BOXED

Lifesafety Power D8P-BOXED D8P-BOXED

• Pre-assembled boxed enclosure eliminates field assembly and reduces wiring errors.
• Centralizes power feeds for cameras, access control, and auxiliary devices from one unit.
• Compact footprint fits space-constrained telecom cabinets, closets, and equipment racks.

Lifesafety Power

SKU: E2-BS1

Lifesafety Power E2-BS1 E2 enclosure with one battery shelf

• Modular shelf mounts inside E2 enclosures, eliminating external UPS units.
• Connects directly to the E2 internal power bus, backing up all downstream devices.
• Single-shelf form factor suits small-to-mid-scale access control and surveillance sites.

Lifesafety Power

SKU: E5M-BOXED

Lifesafety Power E5M-BOXED LABEL Unified Power Sol.LABEL Unifie

• Consolidates 12VDC power distribution from a single enclosure, reducing wiring complexity.
• Delivers 8.5W output to cameras, readers, and auxiliary devices in one chassis.
• Enclosure form factor mounts in equipment racks near primary power entry points.

Lifesafety Power

SKU: FPV4-E1

Lifesafety Power FPV4-E1 4A Ps/Enclosure

• 4A continuous output supports small-to-mid-scale IP camera or access control loads.
• 24VAC input aligns with standard security infrastructure transformers and panels.
• Single-enclosure distribution reduces wiring overhead and simplifies fault isolation.

Lifesafety Power

SKU: RBE-BOXED

Lifesafety Power RBE-BOXED Rackmount Battery Enclosure 12VDC 8 Am

• Holds four 12VDC 8A batteries, centralizing backup power in a single rack chassis.
• Independent per-slot management allows battery replacement without taking the system offline.
• 19-inch rackmount form factor consolidates distributed battery storage, reducing cabling runs.

Lifesafety Power

SKU: RD150-16/E

Lifesafety Power RD150-16/E 220VAC input Rackmount 150W pwr supp

• Switchable 12V/24V output powers mixed legacy and modern devices from one supply.
• 16 independently fused outputs isolate zone faults without dropping remaining circuits.
• 2U rackmount form factor integrates into standard 19-inch racks alongside network gear.

Lifesafety Power

SKU: RD150/250

Lifesafety Power RD150/250 Rack Mount DC dual voltage

• Dual-rail output delivers 12V @ 12A and 24V @ 6A for mixed-voltage deployments.
• Rack-mount form factor consolidates power distribution and reduces cabinet clutter.
• Both rails operate simultaneously, supporting up to 144W per rail concurrently.

Lifesafety Power

SKU: SD4P-BOXED

Lifesafety Power SD4P-BOXED FLEXPOWER SD4 SD16 Smart Distributio

• Device-level supervision detects circuit faults instantly, eliminating manual polling.
• Integrates natively with SD4 and SD16 platforms for staged, no-stranded-asset expansion.
• Ships pre-configured for immediate rack or wall mount, reducing on-site deployment time.

NETGEAR

SKU: GS724T-600NAS

NETGEAR GS724T-600NAS 24PT GE Smart Switch

• All 24 Gigabit ports run simultaneously at full line rate on a 52 Gbps non-blocking fabric.
• 256 VLANs and IGMP snooping isolate camera, access control, and IT traffic on one switch.
• Two SFP uplink slots support fiber backbone links without consuming edge Gigabit ports.

NETGEAR

SKU: MS308E-100NAS

Netgear MS308E-100NAS 8PT Multigig Plus Switch

• Eight PoE++ (802.3bt) ports deliver up to 90W each for high-draw cameras and PTZ heads.
• MultiGig speeds (2.5G/5G/10G) let legacy 1G and modern endpoints share one unmanaged switch.
• Zero-configuration deployment with hardware bandwidth management suits lean-IT edge sites.

Panasonic

SKU: CANISTER-NX3/8TB

Panasonic CANISTER-NX3/8TB 8TB NVR Hard Drive Canister

8TB hot-swap canister for WJ-NX310/NX300/HXE400 NVRs with FIPS 140-2 security

• 8TB capacity per canister with hot-swap installation—no downtime during upgrades
• RAID1 software RAID support protects against single-drive failure in surveillance systems
• Stack up to 4 canisters for 72TB total storage across compatible NVR platforms

Panasonic

SKU: CANISTER/4000

Panasonic CANISTER/4000 4TB Hard Drive Canister

4TB hot-swappable canister for Panasonic WJ-series NVR systems

• 4TB capacity supports extended 24/7 surveillance recording across multiple streams
• Hot-swappable design allows storage replacement without powering down the system
• Compatible with WJ-ND400, WJ-HD716, WJ-HD616, and WJ-HDE400 recorders

Panasonic

SKU: WJ-NVF30W

Panasonic WJ-NVF30W Business Intelligence Kit

Facial recognition & analytics kit for Panasonic NV300 systems

• Facial recognition for access control and identity verification
• People counting and customer behavior analysis from video
• NV300-integrated enhancement kit with 3-year warranty