Speco Technologies CST100 Universal Camera Bracket
Overview
The CST100 is a universal camera bracket designed to mount fixed and PTZ surveillance cameras on walls, ceilings, and pole installations. It addresses the core installation need: securely positioning cameras at the correct angle and height without requiring camera-specific hardware for every model on the job. The bracket accommodates a range of camera sizes and weights, making it a cost-effective standard for mixed-camera deployments where standardizing on one mounting solution cuts inventory and installation time.
Compatibility
The CST100 works with most compact and mid-size fixed dome, bullet, and turret cameras. Verify your specific camera model's weight and footprint against the bracket's load rating before installation. If you are deploying multiple camera types across a facility, confirm each model's mounting pattern (standard 1/4"-20 or M6 threaded inserts) aligns with the bracket's attachment points. Heavier PTZ cameras may require reinforced mounting hardware or alternative brackets rated for higher loads.
Installation Notes
Mount the CST100 to solid substrate (concrete, wood framing, or steel) using appropriate anchors for your surface material. Position the bracket to allow full cable routing (power and video) without sharp bends that could damage connectors or PoE lines. Ensure the mounting surface can support the combined weight of the bracket and attached camera — wall studs and ceiling joists are preferred over drywall alone. Tighten all fasteners firmly but do not over-torque plastic components if present. Verify the camera's field of view matches your coverage plan before final installation.
