Ubiquiti UACC-CABLE-PATCH-OUTDOOR-2M-W Outdoor Patch Cable
Overview
The Ubiquiti UACC-CABLE-PATCH-OUTDOOR-2M-W is a 2-meter outdoor-rated patch cable engineered for UniFi network infrastructure, particularly rooftop and external installations where environmental exposure is unavoidable. The cable terminates with RJ-45 connectors on both ends, allowing direct connection to standard 10/100/1000 Base-T Ethernet ports on access points, switches, PoE injectors, and network appliances. White finish blends into standard network deployments without visual clutter. The outdoor-rated jacket means UV exposure and temperature swings won't degrade the sheath or internal conductors as rapidly as indoor-grade alternatives.
Key Features
- 2-meter fixed length: Long enough to bridge a wall-mounted AP to a PoE injector or switch on an adjacent rack, but short enough to minimize slack that creates cable management headaches. Avoids the need to coil excess cable, which reduces strain on connectors during outdoor thermal cycles.
- Outdoor-rated jacket: Formulated to resist UV degradation, temperature extremes, and humidity. This directly extends service life in sun-exposed installations — skip this and you'll replace the cable every 18–24 months in harsh climates.
- RJ-45 connectors: Standard modular connectors compatible with any ethernet port rated for 10/100/1000 Mbps. No adapters or crimping needed — plug and deploy.
- 10/100/1000 Base-T support: Fully rated for gigabit ethernet, so you won't bottleneck a multi-AP deployment or a high-speed uplink from a rooftop camera or wireless bridge.
- White color: Matches outdoor enclosures and wall-mounted equipment. Reduces the need for cable conduit or sleeving in visible runs.
Integration & Compatibility
Works with any Ubiquiti UniFi access point, switch, or network device featuring an RJ-45 port. Also compatible with standard PoE injectors, surge protectors, and any third-party network hardware using 10/100/1000 Ethernet. If you're integrating outdoor IP cameras or wireless bridges into a UniFi backbone, this cable handles the uplink run from the rooftop or wall-mounted devices down to your indoor network switch or PoE injector without loss of performance.
When to Consider Alternatives
If you need a run longer than 2 meters, Ubiquiti offers outdoor patch cables in other fixed lengths — check the accessory catalog for 5m, 10m, or custom lengths. If your installation is fully sheltered (eaves, conduit, interior walls), a standard indoor-rated patch cable costs less and performs identically. For submarine or fully submerged applications, this cable is not IP67-rated for immersion — stick to above-ground runs and direct rain exposure only.
James EverettPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The UACC-CABLE-PATCH-OUTDOOR-2M-W is a straightforward but essential component for outdoor UniFi deployments. At 2 meters, it's the sweet spot for bridging a rooftop access point or camera to a wall-mounted PoE injector or cabinet without excess coil-up. The outdoor-rated jacket is the real differentiator here — standard cat5e or cat6 will crack and leak within two years in direct sun and freeze-thaw cycles, forcing a mid-season replacement in a production network.
Technical Highlights:
- Outdoor-rated PVC jacket: UV-stabilized formulation extends cable life 3–4 years in direct exposure versus 18–24 months for consumer-grade indoor cable. This matters if your rooftop run is exposed to full afternoon sun and daily temperature swings.
- 2-meter fixed length: Eliminates the cable management penalty of ordering 5m and coiling 3m behind equipment. Cleaner runs reduce connector strain during thermal expansion cycles.
- Gigabit-rated (1000 Base-T): Future-proofs the run if you upgrade to WiFi 6E or add high-bandwidth uplinks. Standard cat5e certified to gigabit speeds, so no bottleneck even on a 1 Gbps uplink.
Deployment Considerations:
- The 2-meter length is fixed — if your rooftop to cabinet run is 3 meters or 10 meters, you'll need a different cable or a splice point (which is a vulnerability). Measure twice before ordering.
- Outdoor-rated does not mean submersible or IP67-sealed at the connectors. Keep the RJ-45 jacks out of standing water and ensure drip loops on vertical runs to shed water away from the termination.
Best for: rooftop UniFi APs, external wireless bridges, and mounted cameras feeding a nearby PoE injector or switch cabinet. Avoids mid-season replacement and the logistics headache of upgrading outdoor cabling mid-deployment.
Frequently Asked Questions
Q: Will the UACC-CABLE-PATCH-OUTDOOR-2M-W work with non-Ubiquiti equipment?
A: Yes. It's a standard RJ-45 patch cable compatible with any 10/100/1000 Mbps ethernet port — UniFi, Cisco, Mikrotik, Juniper, or any vendor. The outdoor jacket is the asset; the connector is universal.
Q: Can I use this cable indoors?
A: Yes. Outdoor-rated cable works indoors without issue — it's simply over-specified and costs more than an indoor alternative. If you have it on hand, deploy it without hesitation.
Q: Is the RJ-45 connector waterproof?
A: No. The connector itself is not sealed. Use a drip loop or grommet to shed standing water away from the jack. If the connector sits in a puddle long-term, water ingress will cause corrosion and intermittent connectivity.
Q: What's the maximum supported speed?
A: 1000 Mbps (gigabit). Fully rated for cat5e/cat6 performance at any standard ethernet speed up to and including 1 Gbps.
Q: How long will this cable last outdoors?
A: Typically 3–4 years in direct UV exposure with freeze-thaw cycles. Life expectancy depends on climate — shaded or covered runs last longer; intense sun and salt air shorter. Indoor runs last indefinitely.
