Tyan M50CYP1UR212 2U Rackmount Server Platform

Overview

The Tyan M50CYP1UR212 is a 2U rackmount server chassis built on Tyan's M50CYP platform family, designed for data center and edge compute deployments where rack density and serviceability matter as much as raw performance. At 39.00 x 23.50 x 10.00 in (L x W x H) and 47.40 lb, this is a full-depth 2U unit intended for standard 4-post server racks rather than shallow network cabinets — plan your rack depth accordingly before ordering. The M50CYP1UR212 ships as a genuine, factory-new unit sourced through channel-direct sourcing, with no grey-market or parallel imports in the supply chain.

Key Features

• 2U Rackmount Form Factor: A 2U chassis balances component density against serviceability — you get room for dual-socket boards, multiple drive bays, and expansion slots without consuming a full 4U of rack space, which matters when you're budgeting U-height across a cabinet shared with switches and PDUs.
• 39.00 x 23.50 x 10.00 in Footprint: The 23.50 in width and 39.00 in depth confirm this is a deep-chassis server build — verify your rack's usable depth (many network racks are shallower than 39 in) before racking it, and reserve rear clearance for cable management and airflow.
• 47.40 lb Chassis Weight: At just under 48 lb before drives, RAM, and CPUs are installed, this falls within single-technician lift range for rack installation, though a rail-assisted install is still the safer approach once fully populated with storage and memory.
• Country of Origin — CN: Manufactured in China; factor this into any NDAA Section 889 or federal procurement review specific to your agency's compliance requirements before deployment in a government or regulated environment.
• UNSPSC 43211502: Classified under the computer servers commodity code, confirming this SKU is procurement-system-ready for organizations that reconcile purchases against UNSPSC taxonomies during budget or audit cycles.

Integration & Compatibility

As a 2U rackmount platform, the M50CYP1UR212 is built to integrate into standard EIA-310 server racks alongside your existing network video recorders and compute infrastructure. If you're sizing this server for a video management or analytics workload, review a storage and retention planning guide before finalizing drive configuration, since bay count and RAID topology drive your usable capacity. For sites building out a full server rack, pair the M50CYP1UR212 with PoE switches to handle camera or edge-device uplinks without adding a separate power injection layer. Buyers evaluating the broader Tyan server lineup should confirm socket count, memory channel support, and PCIe slot configuration directly against your workload before committing, since chassis dimensions alone don't determine compute capacity. The M50CYP1UR212 sits within Tyan's server systems category for buyers comparing rack depth and U-height across competing 2U platforms.

What's in the Box

Package contents were not confirmed in available manufacturer documentation for this listing — contact your sales engineer for a full bill of materials prior to ordering if rail kits or cable accessories are required for your deployment.

Frequently Asked Questions

Q: What rack depth does the Tyan M50CYP1UR212 require?

A: The chassis measures 39.00 in deep, 23.50 in wide, and 10.00 in tall (2U), so confirm your rack's usable depth accommodates a full-depth 2U server before ordering.

Q: How much does the M50CYP1UR212 weigh for installation planning?

A: The bare chassis weighs 47.40 lb; expect additional weight once drives, memory, and CPUs are installed, so plan rail or lift-assist support accordingly.

Q: Where is the Tyan M50CYP1UR212 manufactured?

A: The country of origin listed for this SKU is China (CN) — relevant for procurement teams tracking origin-of-manufacture for compliance review.

Q: Is the M50CYP1UR212 new or refurbished?

A: This unit is factory-new, sourced through channel-direct sourcing with no grey-market or parallel imports.

Karl Wilson

The M50CYP1UR212 is a straightforward 2U chassis play from Tyan — no surprises in the footprint, which is exactly what you want when you're planning rack elevations ahead of a hardware order. At 39.00 in deep and 47.40 lb bare, it's a full-size 2U server, not a compact edge box.

Technical Highlights:

• 2U Form Factor: Fits standard EIA-310 rack rails and shares U-height budgeting with adjacent NVR or switch gear in a mixed rack.
• 39.00 x 23.50 x 10.00 in Chassis: The 39 in depth is the number to double-check against your cabinet — shallow network racks will not clear this.
• 47.40 lb Bare Weight: Manageable for a two-person rack install before drives and memory add to the total.

Deployment Considerations:

• Confirm rear cable clearance given the 39 in depth — dense cabling at the rear of the rack can eat into your working space on a chassis this deep.
• Country of origin is listed as CN — federal or NDAA-sensitive buyers should verify compliance status directly for this SKU before procurement.

The M50CYP1UR212 fits a data center refresh or colocation buildout where you need dual-socket-class rack real estate and already have full-depth 42U-plus cabinets in place — not a shallow edge or wiring-closet install.