Tyan B8056G68AE12HR 1U AMD EPYC 9004 Rack Server
Overview
The Tyan B8056G68AE12HR is a 1U rack-mount server platform built around the AMD EPYC 9004 processor family, aimed at data center and edge-compute deployments where rack density and out-of-band management matter as much as raw compute. At 27.00 x 17.00 x 2.00 in and roughly 40 lb, the B8056G68AE12HR occupies a single rack unit — a fit for standard 19-inch enclosures in colocation racks, network closets, or on-prem server rooms where every U counts. The chassis includes a dedicated Gigabit Ethernet port reserved exclusively for IPM (Intelligent Platform Management), separating management traffic from production data paths — a detail that matters once you're running lights-out administration across a rack of these units. This platform pairs naturally with a rack of network video recorders or compute nodes feeding a VMS cluster, and integrators speccing surveillance or edge-AI infrastructure will recognize the AMC EPYC 9004 platform as a workhorse building block rather than a single-purpose appliance.
Key Features
- 1U Rack Form Factor: Standard 19-inch, 1U footprint means predictable rack planning — you know exactly how much vertical space the B8056G68AE12HR consumes before you order the enclosure, critical when you're stacking multiple compute or recording nodes in a single cabinet.
- AMD EPYC 9004 Platform Support: Built around AMD's EPYC 9004 series, this server targets workloads that need high core counts and memory bandwidth — video analytics pipelines, database backends, and virtualization hosts all benefit from the platform's headroom over prior-generation EPYC silicon.
- Dedicated GbE Port for IPM: A physically separate Gigabit Ethernet port handles IPMI/out-of-band management traffic independent of your production network — so a saturated data link never blocks your ability to remote-console into the box, reboot it, or pull sensor logs during an incident.
- 40 lb Chassis Weight: At 40 lb, this is a two-person lift for most technicians during rack installation — plan your staging accordingly rather than assuming a single installer can seat it solo into a top-of-rack position.
- 27 x 17 x 2 in Dimensions: The 27-inch depth is the number to check against your rack's usable depth (including cable management arms and PDU clearance) before ordering — a common point where 1U servers get stuck mid-install in shallower enclosures.
Integration & Compatibility
The B8056G68AE12HR slots into standard 19-inch rack infrastructure alongside PoE and data switches feeding downstream compute, and pairs with rack PDUs sized for its power envelope. Because IPM runs over its own dedicated GbE port, plan a separate out-of-band management VLAN or physically isolated switch port during commissioning — this is standard practice for lights-out server management and keeps administrative access available even if the primary network segment goes down. If you're building out a compute rack for video analytics or a VMS backend, review a PoE and network planning guide before finalizing switch port allocation, since compute nodes like this one typically sit on non-PoE infrastructure while adjacent camera runs do not.
What's in the Box
Country of origin for the B8056G68AE12HR is China (CN), relevant for procurement teams tracking country-of-origin requirements on server hardware separately from NDAA camera/recording-device rules. Sourcing is handled with commercial-grade fulfillment practices — factory-new units, no grey-market or parallel-import stock.
Frequently Asked Questions
Q: What processor family does the Tyan B8056G68AE12HR support?
A: The B8056G68AE12HR is built for the AMD EPYC 9004 processor series (AMC platform).
Q: What is the rack form factor of the B8056G68AE12HR?
A: It's a 1U rack-mount chassis measuring 27.00 x 17.00 x 2.00 inches.
Q: Does the B8056G68AE12HR have a dedicated management port?
A: Yes — it includes one dedicated Gigabit Ethernet port reserved for IPM (out-of-band management), separate from production data ports.
Q: How much does the B8056G68AE12HR weigh?
A: Approximately 40 lb, which typically requires two people for safe rack installation.
Q: Where is the B8056G68AE12HR manufactured?
A: Country of origin is listed as China (CN).
The Tyan B8056G68AE12HR is a straightforward 1U EPYC 9004 platform, and the detail I flag first for integrators is the dedicated Gigabit Ethernet port for IPM — that's a design choice that pays off the first time you need console access during a network incident on the production side.
Technical Highlights:
- 1U / 27 x 17 x 2 in chassis: Confirm your rack's usable depth against the 27-inch dimension before ordering — cable arms and rear PDUs eat into that clearance fast in denser cabinets.
- Dedicated IPM GbE port: Out-of-band management traffic never competes with production bandwidth, so you retain remote console access even under a saturated data link.
- AMD EPYC 9004 (AMC) platform: Positions this chassis for high-core-count, memory-bandwidth-heavy workloads — video analytics backends and virtualization hosts are the typical fit here.
Deployment Considerations:
- At roughly 40 lb, budget for a two-person rack install rather than a solo lift — especially at higher rack positions.
- Plan a separate management VLAN or isolated switch port for the IPM GbE interface during commissioning; it's built to run independent of your production network, but only if you wire it that way.
Where the B8056G68AE12HR earns its slot is as the compute node in a rack running a video analytics cluster or VMS backend — anywhere you need EPYC-class core density in 1U with lights-out management that survives a production network hiccup.
