Tyan B8050F65TV8E2H-2T-N 2U Dual-Socket AMD EPYC 9004 Server Platform

Overview

The Tyan B8050F65TV8E2H-2T-N is a 2U rackmount server platform built around AMD's 4th Gen EPYC 9004 series processors, aimed at data center and edge-compute deployments that need dense dual-socket compute without stepping up to a 4U chassis. At 27 x 17 x 7 inches and 60 lb bare, this is a serious rack commitment — plan cabinet depth and rail kit clearance before you order, not after it lands on the dock. The B8050F65TV8E2H-2T-N (often searched as B8050F65TV8E2H 2T N) targets integrators building out VMS recording farms, virtualization hosts, or analytics compute nodes where core count and memory bandwidth matter more than single-thread clock speed.

Key Features

• AMD EPYC 9004 Series Platform: 4th Gen EPYC support means Zen 4-based cores with per-socket PCIe 5.0 lanes and DDR5 memory channels — the platform is built for workloads that outgrow a single-socket EPYC 8004 or Xeon-based 1U box, particularly multi-stream VMS transcoding or hypervisor consolidation.
• Dual-Socket (2P) Design: Two EPYC 9004 sockets on one board lets you scale core count into the hundreds without adding a second chassis, cutting rack unit count and power distribution complexity versus a two-node cluster.
• 2U Form Factor: Denser than a 4U tower-converted server, so a fully populated rack holds more compute per cabinet — relevant when colocation or server-room floor space is the constraint, not just budget.
• 27 x 17 x 7in Chassis: The 7-inch height and 27-inch depth are the numbers to check against your rack's usable depth before ordering rail kits — a common miss on dual-socket 2U platforms that run deeper than standard 1U appliances.
• 60 lb System Weight: At 60 lb bare (before drives, RAM, or GPUs), plan for two-person lift or a server lift on install, and confirm rack rail weight ratings, especially in a fully loaded top-of-rack position.
• Country of Origin CN: Manufactured in China — relevant for procurement teams tracking country-of-origin documentation on federal or state contract paperwork.

Integration & Compatibility

As an EPYC 9004-series platform, the B8050F65TV8E2H-2T-N is positioned for standard x86 virtualization stacks (VMware, Proxmox, Hyper-V) and Linux-based recording or analytics workloads where dual-socket core density offsets the cost of a second physical node. Confirm specific CPU SKU, RAM configuration, drive bays, and PCIe slot layout against your integrator's build sheet before finalizing a quote — this listing covers the base platform identity, not a populated build.

Frequently Asked Questions

Q: What processors does the B8050F65TV8E2H-2T-N support?

A: It's built for AMD's 4th Gen EPYC 9004 series in a dual-socket (2P) configuration.

Q: How much does the B8050F65TV8E2H-2T-N weigh?

A: 60 lb bare chassis weight — factor in additional weight once drives, memory, and any add-in cards are installed.

Q: What are the physical dimensions of the B8050F65TV8E2H-2T-N?

A: 27 x 17 x 7 inches (L x W x H), a 2U rackmount form factor.

Q: Where is the B8050F65TV8E2H-2T-N manufactured?

A: Country of origin is China (CN), per manufacturer data.

Q: Is the B8050F65TV8E2H-2T-N a single or dual-socket platform?

A: Dual-socket (2P), supporting two AMD EPYC 9004 series processors on one board.

Eden Phillips

The B8050F65TV8E2H-2T-N is a dual-socket EPYC 9004 2U platform, and the spec that jumps out first is the 60 lb bare weight in a 27 x 17 x 7in chassis — this is a full-depth 2U server, not a compact appliance, so rack planning matters here.

Technical Highlights:

• Dual EPYC 9004 sockets: two-socket support on 4th Gen EPYC means you're scaling core count on one motherboard instead of clustering two single-socket nodes — fewer network hops for tightly coupled compute.
• 2U / 27x17x7in chassis: the 27-inch depth is the number to check against your rack first — many standard 42U cabinets run tight at that depth once cable management and PDUs are in the back channel.
• 60 lb bare weight: that's before RAM, drives, or PCIe cards go in — budget for a lift-assisted install, not a solo rack-and-stack.

Deployment Considerations:

• Confirm rail kit depth adjustment range against the 27in chassis depth before the unit ships — dual-socket 2U boards run deeper than most 1U appliances integrators are used to racking.
• This listing is the base platform identity; CPU SKU, memory config, and storage backplane need to be specified per build before it's rack-ready.

Good fit for a VMS recording farm or virtualization host refresh where you're consolidating several single-socket nodes into fewer, denser 2U chassis — less rack space, fewer points of network failure.