TSC SP-MH241-0035 Label Supply Spindle Assembly

TSC SP-MH241-0035 Label Supply Spindle Assembly

Overview

The SP-MH241-0035 is a label supply spindle assembly for TSC MH-series thermal label printers. This is the mechanical component that grips, advances, and positions label stock through the print head during operation. Install this when media feed becomes inconsistent, slips during printing, or when performing scheduled maintenance on high-volume production lines. It's a direct replacement — no firmware changes, no recalibration needed.

Compatibility

Compatible with MH241, MH341, and MH641 thermal label printer models. Verify your exact printer model before ordering — this spindle assembly is not interchangeable across TSC's broader product range (e.g., not for TE, TH, or TX series printers). Check your printer's model nameplate or documentation if uncertain.

Installation Notes

Replace the spindle assembly with the printer powered off and media removed. No special tools are typically required beyond a standard Phillips screwdriver. The assembly slides into the media supply cartridge slot on the left side of the printer frame. Ensure the spindle core seats fully and the retaining clip locks into position before reloading media. After installation, run a test label to confirm media feeds without skew or slippage. If media still slips after replacement, the root cause may be worn drive gears or a slipping clutch — contact TSC support for diagnostics.