TSC PH-MX241P-0002 Printhead Assembly for MX341P
Overview
The TSC PH-MX241P-0002 is an OEM printhead assembly engineered as a direct replacement for the MX341P thermal printer line. This component handles the actual print strike in high-volume label and receipt printing environments — when print quality degrades, image smearing appears, or the printhead shows mechanical wear after 12–24 months of continuous operation, this assembly restores original print fidelity without firmware recalibration. It is factory-new and sourced direct from the manufacturer.
Compatibility
This printhead assembly is designed exclusively for TSC MX341P thermal printers. It is not compatible with other TSC printer families (MX241P, MX641P, or any non-MX3xx series). Confirm your printer model before ordering — using an incompatible printhead will prevent the printer from initializing and void any in-warranty support. The MX341P supports both direct thermal and thermal transfer print modes; this assembly functions identically in both modes.
Installation Notes
Printhead replacement requires power-down and cooling time (typically 15–20 minutes after final print job). Standard field technician tools are sufficient — no specialized torque wrench or alignment fixtures are needed. Remove the ribbon cartridge first, then release the printhead carriage retention clips and slide the assembly out horizontally. Insert the new printhead unit, reseat the carriage clips, and reinstall the ribbon. Most field replacements take under 10 minutes. If you encounter resistance during removal, do not force — verify the retention clips are fully released to avoid damaging the underlying carriage frame.
