TSC 98-0380150-00LF RS232 Printer Cable

TSC 98-0380150-00LF RS232 Printer Cable

Overview

The TSC 98-0380150-00LF is a serial RS232 cable designed to connect TSC thermal printers to host systems via standard 9-pin or 25-pin serial ports. This cable bridges communication between the printer and warehouse management, point-of-sale, or logistics software—essential when your thermal printer must integrate with legacy systems or devices that lack USB or network connectivity. RS232 remains the standard for industrial thermal printer integration in distribution centers and shipping operations where parallel or serial connections are already embedded in the WMS infrastructure.

Compatibility

This cable is engineered for TSC thermal printer models equipped with RS232 serial interfaces, including the TSC C1500PT and related thermal printer series. Before ordering, verify that your TSC printer model includes an RS232 serial port connector. If your printer features only USB or Ethernet, this cable will not function. Compatibility depends on the host device's serial port type (DB-9 or DB-25)—confirm your system's serial interface matches the cable connectors before installation.

Installation Notes

Connect the cable to the printer's RS232 port and the corresponding serial port on your host device. Ensure the host system is configured for serial communication at the correct baud rate, data bits, stop bits, and parity settings—typically 9600 baud, 8 data bits, 1 stop bit, no parity for TSC thermal printers. Avoid routing the cable near high-voltage power lines or motor-driven equipment; shielding reduces noise interference on serial data lines. Keep cable runs under 50 feet to prevent signal degradation. No external power is required; serial communication is powered by the host device's serial port.