TSC 72-0050011-10LF Power Cord for TTP244/TTP2410M

TSC 72-0050011-10LF Australian Power Cord for TTP244 / TTP2410M Label Printers

Overview

The TSC 72-0050011-10LF is the factory-specified Australian-plug power cord designed for TSC TTP244 and TTP2410M desktop label printers. If you're deploying or servicing either of these printers in Australia or in any facility wired to Australian AS/NZS 3112 outlets, this is the correct replacement cord — not a generic aftermarket cable. The factory part number cross-reference is 72-0180100-03LF, which is how this cord is tracked through TSC's own supply chain. Sourcing the 72-0050011-10LF (often searched as 72 0050011 10LF) directly ensures you're getting a cord matched to the printer's power input spec rather than guessing at amperage ratings with a third-party substitute.

Key Features

• Australian Plug Configuration: Terminated with an AS/NZS 3112 plug — the standard three-flat-pin format used in Australia and New Zealand. This matters in depot or warehouse environments where using a non-compliant cord risks electrical safety non-compliance and potential insurance issues.
• Printer-Specific Fit: Engineered to the TTP244 and TTP2410M power inlet spec. Grabbing a generic IEC cord from a parts bin can work, but matching the OEM cord eliminates any uncertainty about connector retention, strain relief geometry, and current rating alignment.
• Factory Part Number Traceability: Cross-references to TSC factory PN 72-0180100-03LF, which is useful when reconciling purchase orders, asset management records, or warranty documentation against TSC's own parts catalog.
• Genuine TSC Component: Sourced as a factory-new TSC accessory — not a grey-market substitute. For managed print fleets where uniformity and traceability matter, keeping OEM cords on file avoids the mixed-provenance problem that complicates field service.
• 2-Year Warranty: Covered under TSC's standard 2-year warranty, giving you a documented recourse path if the cord fails — something you don't get with an unbranded replacement.

Compatibility

This cord is confirmed compatible with the following TSC printer models:

• TTP244: TSC's 203dpi desktop direct-thermal / thermal-transfer label printer used in light industrial and retail labeling applications.
• TTP2410M: The TTP2410M-series desktop printer platform, also used in barcode label and receipt printing environments.

If you are deploying TSC printers outside of Australia — in North America, Europe, or Asia — this cord is not the correct choice. Confirm your outlet standard before ordering. For broader TSC accessories and TSC label printer components, verify the regional cord variant that matches your facility's power standard.

Frequently Asked Questions

Q: What printers is the TSC 72-0050011-10LF compatible with?

A: The 72-0050011-10LF is specifically designed for the TSC TTP244 and TTP2410M label printers. It is not confirmed compatible with other TSC printer models.

Q: What plug type does the 72-0050011-10LF use?

A: It uses an Australian AS/NZS 3112 plug configuration, making it the correct cord for Australian and New Zealand power outlets. It is not suitable for North American, European, or UK outlets.

Q: What is the factory cross-reference part number for this cord?

A: The TSC factory part number is 72-0180100-03LF. The 72-0050011-10LF is the SKU used in distribution; both refer to the same component.

Q: What warranty does the 72-0050011-10LF carry?

A: This cord carries a 2-year manufacturer warranty as a genuine TSC accessory.

Q: Is this the same as a generic IEC power cord?

A: No. While some generic IEC C13/C14 cords may physically fit the printer, the 72-0050011-10LF is the OEM-specified cord with the correct Australian plug termination, current rating, and strain relief geometry for the TTP244 and TTP2410M platforms.

James Everett

When I get asked about the 72-0050011-10LF, the question is almost always the same: 'Can I just use any cord?' Technically, sometimes yes — but the moment you're managing a fleet of TTP244 or TTP2410M printers across an Australian distribution center, cord standardization matters more than the $9 price tag suggests. This is the factory-specified Australian plug cord, cross-referenced as TSC PN 72-0180100-03LF, and that traceability alone justifies stocking it over a generic substitute.

Technical Highlights:

• Australian Plug Spec: AS/NZS 3112 termination is not interchangeable with other regional standards — this cord is the right fit for AU/NZ facilities and eliminates the compliance guesswork that comes with aftermarket cords of uncertain rating.
• OEM Part Traceability: The dual SKU (72-0050011-10LF in distribution, 72-0180100-03LF at factory) means you can reconcile this against TSC's own parts catalog when auditing assets or processing warranty claims.
• 2-Year Warranty Coverage: As a genuine TSC accessory, this cord carries a 2-year warranty — something a generic replacement cord pulled from a surplus bin will not provide.

Deployment Considerations:

• If your facility runs a mix of regional printer deployments, confirm the outlet standard before ordering — this cord is Australian only and will not work in North American or European installations without an adapter, which itself introduces compliance risk.
• The item status in distribution is CU (catalog/unavailable at time of data entry), so confirm current stock availability before building it into a large service kit order.

For Australian warehouse or retail labeling environments running TSC TTP244 or TTP2410M printers, the 72-0050011-10LF is the correct, traceable, warranty-backed cord — worth stocking as a spare rather than improvising with an unverified substitute at the worst possible moment.