Altronix T2MDK5F 12VDC Power Distribution Kit for Surveillance Systems
Overview
The Altronix T2MDK5F is a bundled power distribution solution combining the TROVE2M2 enclosure, TMV2 power module, and a 10-amp, 12VDC output — engineered for centralized power management in commercial surveillance and access control installations. At 40.85 lbs and measuring 6.50 × 21.50 × 27.25 inches, the T2MDK5F is sized for rack or wall deployment where you need serious power headroom across multiple devices without running individual supplies to each endpoint. For integrators building out multi-camera or multi-reader installations, centralizing to a single distribution point like this simplifies wiring runs and makes service calls faster — one enclosure to open, one system to check. Browse the full Altronix power solutions catalog to see where this kit fits within their broader line.
Key Features
- 12VDC @ 10A Regulated Output: Ten amps at 12 volts gives you substantial headroom for multi-device loads — enough to power several cameras, readers, or locking hardware from a single distribution point without voltage sag under load. That matters in multi-door access control closets where cumulative inrush can drop under-sized supplies and cause nuisance lock resets.
- TROVE2M2 Enclosure: The TROVE2 series enclosures are purpose-built for Altronix power and access control modules, with organized internal layouts that support clean, inspectable wiring. For installations subject to site audits or UL-listed system requirements, a well-organized enclosure is not optional — it's part of passing inspection.
- TMV2 Power Module Included: The bundled TMV2 module integrates directly into the TROVE2M2 chassis, eliminating fitment guesswork that comes with sourcing modules and enclosures separately. Everything in the T2MDK5F kit is matched and pre-configured to work together out of the box.
- Substantial Physical Footprint (6.50 × 21.50 × 27.25 in): The enclosure's 27.25-inch height and 21.50-inch width mean this belongs in a dedicated equipment room or a properly sized telecom closet — not a surface-mounted residential panel location. Plan your wall or rack real estate accordingly before deployment.
- 40.85 lb Installed Weight: At nearly 41 pounds, mounting hardware selection and anchor point load ratings matter. Wall installations require studs or rated anchors — drywall-only mounting is not appropriate for this unit.
- Centralized Power Distribution: Routing all device power through a single managed enclosure reduces field troubleshooting time. Instead of tracking down power issues device by device across a facility, technicians have one location to verify voltage, current draw, and fusing status. That centralization pays dividends on any installation with more than a handful of powered endpoints. Pair this with a quality access control system to maximize the value of centralized power management.
Integration & Compatibility
The T2MDK5F is designed for integration within Altronix's TROVE ecosystem, making it a natural fit for installations already using Altronix access control power accessories. The 12VDC output is the standard voltage for the majority of commercial electromagnetic locks, electric strikes, and proximity readers — meaning this kit drops directly into most access control designs without voltage conversion. It also suits 12V-rated surveillance cameras and ancillary devices such as IR illuminators or PTZ receivers that don't draw PoE from a switch. For PoE camera infrastructure, pair this with a dedicated PoE switch rather than relying solely on DC distribution. If your design calls for battery backup, verify that the TMV2 module's charging circuit specifications match your intended battery capacity — consult the Altronix TMV2 datasheet for charge current ratings before sizing your backup battery. See Altronix's broader power supply line for alternative output voltages and form factors if 12VDC @ 10A doesn't match your load profile. For large-scale deployments, reviewing a power planning guide before finalizing distribution architecture can prevent costly redesigns.
Frequently Asked Questions
Q: What is the power output of the T2MDK5F?
A: The T2MDK5F delivers 12VDC at 10A, providing up to 120 watts of total output capacity for connected devices.
Q: What is included in the T2MDK5F kit?
A: The T2MDK5F bundle includes the TROVE2M2 enclosure and the TMV2 power module. These components are matched to work together within the TROVE2 ecosystem.
Q: How much does the T2MDK5F weigh, and what are its dimensions?
A: The T2MDK5F weighs 40.85 lbs and measures 6.50 × 21.50 × 27.25 inches. Plan mounting anchor points rated for this load before installation.
Q: Is the T2MDK5F suitable for powering PoE IP cameras directly?
A: No — PoE cameras require 802.3af/at power delivered over Ethernet from a PoE switch or injector. The T2MDK5F's 12VDC output is suited for cameras, locks, and readers with direct DC power inputs, not PoE-only devices.
Q: Can the T2MDK5F support battery backup?
A: The TMV2 module is designed for use within the Altronix TROVE ecosystem, which supports battery backup configurations. Confirm charging circuit specifications in the TMV2 datasheet to properly size your backup battery before deployment.
Q: Where should the T2MDK5F be installed?
A: Given its dimensions (6.50 × 21.50 × 27.25 in) and weight (40.85 lbs), the T2MDK5F is intended for a dedicated equipment room, telecom closet, or rack environment with appropriate mounting infrastructure — not surface-mounted in a finished space.
The T2MDK5F is the kit I reach for when a job calls for centralized 12VDC distribution in a structured enclosure without sourcing the TROVE2M2 and TMV2 separately — the bundle guarantees module-to-chassis fit and cuts procurement friction on multi-phase projects. That 10A output at 12VDC is enough headroom to run a realistic mix of readers, strikes, and ancillary devices in a small-to-mid access control deployment without pushing the supply into thermal stress.
Technical Highlights:
- 12VDC @ 10A Output: 120W total capacity supports multi-device loads typical of 4–8 door access control deployments — readers, EM locks, and door controllers — without requiring a secondary distribution panel in most designs.
- TROVE2M2 + TMV2 Bundle: Sourcing the enclosure and module as a matched kit eliminates the fitment verification step; the TMV2 is rated and pre-positioned for the TROVE2M2 chassis, which matters when you're commissioning under a time constraint.
- Physical Footprint (27.25 × 21.50 × 6.50 in / 40.85 lbs): This is closet-scale hardware — it needs a proper equipment room installation with anchor points rated for the weight. Factor the 40.85 lb figure into your mounting plan from day one, not after the enclosure arrives on site.
Deployment Considerations:
- Verify available wall depth or rack clearance against the 6.50-inch depth before ordering — shallow telecom closets and flush-mount wall boxes frequently can't accommodate this unit without modification.
- This kit does not power PoE devices — if your camera or intercom devices draw power over Ethernet, you still need a separate PoE switch or injector in the design; the T2MDK5F's 12VDC rail won't substitute for 802.3af/at sourcing.
The T2MDK5F earns its place in commercial multi-door access control closets where the integrator wants a single Altronix-native enclosure handling power distribution, clean wiring layout, and battery backup readiness — particularly on school, healthcare, or government facilities where the AHJ expects an organized, labeled power center during inspection.
