Middle Atlantic 25DTP-4ACT Through-Panel Power Duplex Module

The 25DTP-4ACT is a through-panel power (TPP) duplex outlet module from Middle Atlantic, built to add a 2-outlet 20A power drop inside a rack or enclosure without running a separate outlet strip. It ships in an ivory finish with a 10 FT power cord and is TAA-compliant, which matters if this rack is going into a federal or federally-funded facility with sourcing restrictions. The 25DTP-4ACT mounts through the equipment panel, keeping outlets accessible at the point of use rather than buried behind a rack full of gear.

Overview

TPP modules like the 25DTP-4ACT solve a specific rack-wiring problem: getting power to a spot inside the enclosure without snaking an extension strip across the rail. The 2-outlet 20A duplex configuration covers a pair of devices — a switch and a small UPS, or two low-draw appliances — on one drop.

Key Features

• 2-20A Duplex Outlets: Two independently usable outlets rated to 20A total circuit capacity, enough headroom for network gear, KVM extenders, or rack lighting without tripping a breaker on mixed loads.
• 10 FT Power Cord: Long enough to reach a rack's rear PDU or wall circuit from a mid-rack mounting position without a separate extension.
• Through-Panel Mounting: Outlets pass through the panel face, so power stays reachable at the equipment location instead of hidden behind cable runs.
• Ivory Finish: Matches light-colored enclosure interiors and panels for a cleaner rack build-out.
• TAA Compliant: Clears Trade Agreements Act sourcing requirements for government and federally-funded integration projects.

Integration & Compatibility

As a through-panel power module, the 25DTP-4ACT is intended for installation into a compatible Middle Atlantic panel cutout or rack accessory position. Pair it with a rack enclosures build using Middle Atlantic's broader Middle Atlantic catalog for panels and PDUs, and review a power and PoE planning guide when sizing total rack load across multiple TPP or PDU drops. Consider rack power distribution units as a complementary component when a single rack needs more than two switched outlets.

Frequently Asked Questions

Q: Is the 25DTP-4ACT TAA compliant?

A: Yes, the 25DTP-4ACT is TAA-compliant.

Q: How many outlets does the 25DTP-4ACT provide?

A: It provides two duplex outlets on a shared 20A circuit.

Q: How long is the power cord on the 25DTP-4ACT?

A: The unit ships with a 10 FT power cord.

Q: What color is the 25DTP-4ACT?

A: It ships in an ivory finish.

Marty Allison

The 25DTP-4ACT is a straightforward through-panel duplex power module, and on a rack build that's exactly what you want — no smart-PDU complexity, just a reliable 2-outlet 20A drop with a 10 FT cord long enough to reach a rear power source.

Technical Highlights:

• 2-20A Duplex Outlets: Two outlets on one 20A-rated circuit gives you headroom to power a pair of network or AV devices from a single mounting point.
• 10 FT Cord: Reaches from a mid-rack panel position back to a PDU or wall circuit without an extension cord cluttering the enclosure.
• TAA Compliance: Confirmed for this SKU, which clears the sourcing bar on government and federally-funded integration jobs.

Deployment Considerations:

• This is a through-panel mount — confirm your rack panel or enclosure has a compatible cutout before ordering.
• Two outlets on a shared 20A circuit is fine for a couple of devices, but don't stack this as your only power source for a fully loaded rack — plan a proper PDU for higher-density loads.

Good fit for a federal or education AV rack build where you need a clean, code-compliant power drop at one panel location and TAA sourcing is a hard requirement — the 25DTP-4ACT handles that without over-engineering it.