Panduit HLB2S-C0 Tak-Ty Hook & Loop Stacked Strip Cable Tie

Overview

The Panduit HLB2S-C0 is a 7-inch Tak-Ty® hook and loop stacked strip cable tie engineered specifically for high-performance network cable installations where over-tensioning is a real concern. Unlike conventional cut-to-length ties, the stacked strip format ships ready to deploy — no pre-cutting, no staging per run — which translates directly to faster termination on structured cabling, patch management, and security system cable routes. The black nylon construction is RoHS compliant and each package ships 100 ties, with cartons containing 10 packages (1,000 ties per carton).

If you manage cabling in a network infrastructure environment or are terminating surveillance system wiring in equipment rooms, the HLB2S-C0 belongs in your kit bag alongside your cable management hardware. The rounded edges are a deliberate design choice — installers working high-density runs handle these repeatedly, and sharp-edged ties cause hand fatigue and minor cuts over a long pull day.

Key Features

• Stacked Strip Format, 7-Inch Length: The pre-staged strip design eliminates the cut-and-sort step that eats time during structured cabling runs. At 7 inches, there's enough wrap to handle larger cable bundles — patch panel homerun groups or multi-pair security camera conduit bundles — without the tie going taut before you've seated it properly.
• Hook and Loop Reusability: Unlike single-use nylon cable ties, the hook and loop mechanism lets you re-dress cable routes after moves, adds, and changes without cutting and discarding hardware. In active security system environments where camera assignments shift or NVR port rebalancing happens, this is a practical labor savings over consumable zip ties.
• Over-Tensioning Protection for Network Cables: The Tak-Ty® design is rated specifically for high-performance network cables — Cat6A, Cat7, and shielded security camera cable runs where exceeding the cable's minimum bend radius or applying point pressure degrades signal integrity. A cable tie that cinches down hard can cause intermittent link failures that are hard to diagnose; the hook and loop approach applies even, controlled pressure.
• Rounded Edges for Installer Safety: On a dense cabling day — think a 48-port switch stack or a 32-camera NVR installation — an installer handles ties dozens or hundreds of times. Rounded edges are a direct response to the hand fatigue and minor lacerations that come with sharp-edged alternatives.
• RoHS Compliant Nylon Construction: RoHS compliance means the nylon formulation meets the EU Restriction of Hazardous Substances directive — relevant if you are installing into facilities with environmental compliance requirements (healthcare, government, LEED-certified buildings). The nylon material handles the temperature range of a standard indoor equipment room without brittleness.
• 100-Piece Packaging, 10-Pack Carton: Each package contains 100 ties, and the carton quantity is 10 packages (1,000 total). For a project-level buy — a full IP camera deployment or structured wiring rough-in — the carton quantity means you're not counting out individual pieces mid-job.

Integration & Compatibility

The HLB2S-C0 is designed for high-performance network cable management and works across standard structured cabling applications — Cat5e, Cat6, Cat6A, and shielded cable types common in IP camera and access control deployments. The 7-inch length accommodates moderate cable bundle diameters typical of patch panel dressing, equipment rack cable management, and in-ceiling or in-conduit security cable groupings.

For larger trunk bundles or higher-density groupings, evaluate whether the 7-inch wrap diameter is sufficient before spec'ing quantity. The hook and loop format is not a substitute for structured cable management trays or horizontal managers in high-density rack environments — it is a dressing and bundling solution, not a primary support mechanism.

What's in the Box

• 100x Panduit Tak-Ty® Hook and Loop Stacked Strip Cable Ties (HLB2S-C0), 7 in., Black

Frequently Asked Questions

Q: What is the package quantity for the HLB2S-C0?

A: Each package of the HLB2S-C0 contains 100 hook and loop stacked strip cable ties. The carton quantity is 10 packages, or 1,000 ties per carton.

Q: What types of cables is the HLB2S-C0 designed for?

A: The HLB2S-C0 is designed specifically for use with high-performance network cables — including Cat6A, shielded data cable, and security system wiring — where protecting against over-tensioning is critical to maintaining signal integrity.

Q: Are the HLB2S-C0 cable ties reusable?

A: Yes. The hook and loop design is reusable — you can open, re-dress, and re-fasten without cutting, which is useful in any installation where cable routes are modified during adds, moves, or changes.

Q: What is the overall length of the HLB2S-C0 tie?

A: The HLB2S-C0 measures 7 inches in overall length, providing enough wrap capacity for moderate-sized cable bundles typical of structured cabling and security system installations.

Q: Is the HLB2S-C0 RoHS compliant?

A: Yes. The HLB2S-C0 meets RoHS (Restriction of Hazardous Substances) compliance standards, making it suitable for installations in facilities with environmental or regulatory material requirements.

Q: What color is the HLB2S-C0?

A: The HLB2S-C0 is black, the standard color for most structured cabling and equipment room applications.

Eden Phillips

The HLB2S-C0 is one of those products that gets overlooked in a project BOM until someone spends an afternoon re-dressing a 48-port patch panel that was originally zip-tied — then it goes on every future job. The 7-inch Tak-Ty® format packs 100 reusable ties per package with rounded edges, and the stacked strip design means you pull one off and it's ready to use without any prep step. That matters when you're managing cable at volume.

Technical Highlights:

• 7-Inch Reusable Wrap: The 7-inch length handles moderate bundle diameters without fighting the tie — relevant for typical 6-8 cable homerun groups behind a 24-port switch or NVR. The hook and loop closes clean and reopens without tools.
• Over-Tensioning Protection: The Tak-Ty® hook and loop applies distributed, even pressure rather than a cinch point — which matters on Cat6A and shielded camera cable where a tight zip tie at a bend can cause intermittent loss of margin on a 10GbE link.
• RoHS Compliant Nylon: The nylon construction is RoHS-rated, which satisfies materials compliance for healthcare, government, and LEED-certified facility builds where hazardous substance documentation is required at installation closeout.

Deployment Considerations:

• At 100 ties per package and a 10-pack carton, order at the carton level for any deployment of 20 or more cable termination points — running short mid-job on ties is a predictable problem on structured cabling pulls.
• The 7-inch length has a practical maximum bundle diameter — for trunk cables or large conduit groupings with 12+ runs, verify the wrap diameter is sufficient before spec'ing. The HLB2S-C0 is not designed as a primary cable support in vertical runs; use it for dressing and grouping, not weight-bearing.

The HLB2S-C0 is the right call for structured cabling installations in active environments — enterprise equipment rooms, security system head-end closets, and any rack space where cable routes change on a regular basis and single-use zip ties create ongoing waste and re-work labor.