Server Technology C2W48TE-DQME2M99 Switched 48-Outlet 3-Phase PDU

Overview

The Server Technology C2W48TE-DQME2M99 is a switched Primary Pro2 rack power distribution unit built around 48 configurable alternating-phase Hdot outlets, running on 208V 3-phase input. It's designed for data center and server room racks where you need outlet-level control across three phases rather than a single dumb power strip. This is a switched PDU, not a monitored or metered strip — the core value is remote on/off control per outlet bank, not usage data.

Key Features

• 48 Configurable Alt Phase Hdot outlets: Alternating-phase outlet placement lets you distribute connected equipment evenly across all three phases as you cable the rack, which keeps phase loads balanced instead of stacking load on one leg — a common cause of nuisance breaker trips in dense racks.
• 208V 3-phase input: Matches standard North American data center 3-phase distribution, so it drops into existing 208V infrastructure without a step-down or separate transformer.
• Switched outlet control: Outlets can be power-cycled without a technician walking the row, which cuts truck-rolls for hung servers or network gear that just needs a hard reset.
• High outlet density (48): One C2W48TE-DQME2M99 can cover a full rack or two half-populated racks, reducing the number of PDUs — and the number of network drops for management — you need to provision per row.

Integration & Compatibility

The C2W48TE-DQME2M99 (often searched as C2W48TE DQME2M99) belongs to Server Technology's Primary Pro2 switched PDU line. If your rack runs single-phase 120V/208V equipment only, confirm outlet compatibility against your gear's plug type before ordering — configurable Hdot outlets are flexible but the exact receptacle mix should be verified against the specific unit configuration. For environments that need outlet-level current monitoring rather than switching alone, ask about a metered or monitored variant in the same power products line rather than assuming this switched model reports usage data.

Frequently Asked Questions

Q: What voltage and phase does the C2W48TE-DQME2M99 run on?

A: 208V, 3-phase input.

Q: How many outlets does the C2W48TE-DQME2M99 have?

A: 48 configurable alternating-phase Hdot outlets.

Q: Is the C2W48TE-DQME2M99 a monitored or switched-only PDU?

A: It's a switched PDU (Primary Pro2 Switched series) — outlets can be turned on and off remotely. Evidence does not confirm outlet-level power monitoring for this specific model.

Q: Will the C2W48TE-DQME2M99 balance load across all three phases?

A: Yes — the alternating-phase Hdot outlet layout is designed to let you spread connected loads evenly across the three phases as equipment is plugged in.

Ted Perry

The C2W48TE-DQME2M99 is a 48-outlet switched PDU, and the detail worth calling out is the alternating-phase Hdot outlet arrangement on a 208V 3-phase feed.

Technical Highlights:

• 48 outlets, alternating phase: outlets are physically interleaved across the three phases so you balance load naturally as you populate the rack top to bottom, instead of having to track phase assignment on a spreadsheet.
• 208V 3-phase input: standard data center distribution voltage — no step-down transformer or separate single-phase feed needed on typical US commercial power.
• Switched control: remote outlet power cycling on a PDU this dense means one unit can cover a full rack without a technician physically touching every device.

Deployment Considerations:

• Confirm the specific outlet/receptacle configuration against your equipment's power cords before ordering — 'configurable' outlet PDUs ship in multiple receptacle mixes.
• This listing doesn't specify amperage rating or physical mounting depth — verify branch circuit rating and rack unit height fit against your specific rack before final quoting.

Reasonable fit for a data center row needing dense outlet-level switched power on 208V 3-phase circuits, where balancing load across phases in a single rack matters more than per-outlet metering.