Server Technology C2XG24SN-4NJN5D6 2U Switched Rack PDU

Overview

The Server Technology C2XG24SN-4NJN5D6 is a 2U switched rack power distribution unit built for data center and server room racks where per-outlet control and circuit-level visibility matter. This PRO2 POPS PIPS-series unit combines 18xC13 outlets with 6xCX HDOT (High Density Outlet Technology) outlets in a single 2U chassis, giving you 24 total outlet positions without eating extra rack space. The C2XG24SN-4NJN5D6 (often searched as C2XG24SN 4NJN5D6) targets IT architects and facilities engineers standardizing on switched PDUs across mixed-density racks — servers, network switches, and storage arrays all pulling from one metered, remotely controllable strip.

Key Features

• 18xC13 + 6xCX HDOT Outlets: The C13 outlets handle standard server and switch power cords, while the 6 CX HDOT positions let you fit high-density outlet connectors into a smaller footprint — useful when a rack is packed tighter than standard C13 spacing allows and you still need individually switched circuits.
• 2U Form Factor: Consolidating 24 outlets into 2U of rack space instead of spreading switched power across multiple 1U or 0U strips frees rack units for compute and networking gear — a real consideration in colocation cages billed by the U.
• Switched Outlet Control: Individually switched outlets mean you can power-cycle a hung server or unresponsive switch remotely instead of walking to the data center floor — this cuts truck rolls and after-hours site visits for routine reboot tickets.
• Input Amp Metering: Onboard amperage metering at the input gives you real-time load visibility per PDU, so you can catch a circuit creeping toward its breaker limit before it trips and takes down an entire rack.
• PRO2 POPS PIPS Platform: Building on Server Technology's PRO2 switched PDU platform, this unit is positioned for environments already standardized on Server Technology's outlet and monitoring architecture, simplifying spares and firmware management across a fleet of PDUs.
• TAA Compliance: TAA compliance supports procurement for government and federal-adjacent contracts where Trade Agreements Act sourcing rules apply to purchased hardware.

Integration & Compatibility

The mixed C13/CX HDOT outlet layout on the C2XG24SN-4NJN5D6 is intended for racks running a combination of standard IEC C14-corded equipment and higher-density gear that benefits from HDOT connectors. Pair this PDU with rack power distribution units and UPS planning that accounts for total rack amperage draw across all switched strips, and consult a power and infrastructure planning guide when sizing PDU count against rack power budgets. For racks running dense server and networking equipment, review networking components compatibility to confirm connector fit across your full equipment list before ordering.

Frequently Asked Questions

Q: Is the C2XG24SN-4NJN5D6 TAA compliant?

A: Yes, the C2XG24SN-4NJN5D6 is TAA compliant, supporting procurement under Trade Agreements Act sourcing requirements.

Q: How many outlets does the C2XG24SN-4NJN5D6 have?

A: It provides 24 total outlets: 18xC13 and 6xCX HDOT.

Q: What rack space does the C2XG24SN-4NJN5D6 require?

A: It occupies 2U of rack space.

Q: Does the C2XG24SN-4NJN5D6 provide power metering?

A: Yes, it includes input amperage metering for circuit-level load visibility.

Q: Are the outlets on the C2XG24SN-4NJN5D6 individually switched?

A: Yes, this is a switched PDU model, allowing individual outlet control.

Karl Wilson

The C2XG24SN-4NJN5D6 is one of those PDUs that solves a real rack-density problem: 18 C13 outlets plus 6 CX HDOT positions in a single 2U chassis means you're not sacrificing a second rack unit just to fit high-density connectors alongside standard server cords.

Technical Highlights:

• 18xC13 + 6xCX HDOT outlet mix: gives you 24 switchable outlet positions without needing a separate HDOT-only strip — fewer PDUs to manage per rack.
• 2U form factor: consolidates outlet count into 2 rack units instead of splitting switched power across multiple 0U or 1U strips, which matters directly in per-U colocation billing.
• Input amp metering: real-time load data at the input lets you spot a circuit approaching breaker capacity before it trips, rather than finding out during an outage.

Deployment Considerations:

• Confirm your equipment's power cord connectors match the C13/CX HDOT split before ordering — mixed racks with a lot of non-standard cords may need adapters.
• Switched outlet control depends on network connectivity to the PDU's management interface — plan your management network segment before installation, not after.

This is a fit for a colocation or enterprise data center rack standardizing on Server Technology's PRO2 platform, where per-outlet switching and input metering across a dense mixed-connector rack are the deciding factors over a simpler unmetered strip.