Server Technology C2X36TE-EPAF2M99/C Switched Rack PDU

Overview

The Server Technology C2X36TE-EPAF2M99/C is a switched PRO2 rack power distribution unit built around 36 configurable Alt-Branch HDOT outlets, rated 230V, single-phase, at 32A. It's built for data center and server room racks where per-outlet control and configurable outlet branching matter more than a fixed outlet layout.

Key Features

• 36 Configurable Alt-Branch HDOT Outlets: HDOT (High Density Outlet Technology) outlet sensing lets you monitor and switch power at the individual outlet level, so you can remotely cycle a hung server or isolate a failing PDU branch without walking the data center floor. The alt-branch configuration gives you flexibility in how outlets are grouped across the internal branch circuits during setup.
• 230V Single-Phase Input: Matches standard single-phase 230V data center and telecom rack power feeds common outside North America and in 230V-standardized facilities — confirm your upstream circuit matches before ordering, since this unit is not a multi-phase model.
• 32A Rated Capacity: A 32A branch circuit rating gives headroom for dense rack loads — multiple 1U/2U servers, switches, and storage nodes — without tripping breakers under normal operating load, provided your rack's actual draw stays within the rated limit.
• Switched Outlet Control: As a switched (not just metered) PDU, individual outlets can be turned on or off remotely, which supports staged equipment boot sequences and remote power-cycling for troubleshooting without physical rack access.

Integration & Compatibility

The C2X36TE-EPAF2M99/C (often searched as C2X36TE EPAF2M99/C) is part of Server Technology's PRO2 switched PDU line, designed for standard rack-mount installation in data center and telecom cabinet environments. As with any switched PDU, confirm your rack's total connected load and available circuit capacity align with the 230V 1PH 32A rating before deployment, and verify your management network segment can reach the unit's switching interface for remote outlet control.

Frequently Asked Questions

Q: What voltage and amperage does the C2X36TE-EPAF2M99/C support?

A: It's rated for 230V, single-phase (1PH) input at 32A.

Q: How many outlets does the C2X36TE-EPAF2M99/C have?

A: 36 configurable Alt-Branch HDOT outlets.

Q: Is the C2X36TE-EPAF2M99/C a switched PDU?

A: Yes, it's a switched PRO2 model, meaning individual outlets can be controlled remotely rather than only metered.

Q: What does HDOT mean on this PDU?

A: HDOT (High Density Outlet Technology) refers to Server Technology's per-outlet sensing and switching design used across the 36 outlets on this unit.

James Everett

The C2X36TE-EPAF2M99/C packs 36 switched outlets onto a single PRO2 unit rated 230V 1PH 32A — that's a lot of per-outlet control density for a single-phase rack feed.

Technical Highlights:

• 36 Alt-Branch HDOT outlets: per-outlet switching across all 36 positions means you can remote-cycle individual devices instead of killing power to an entire branch.
• 32A @ 230V 1PH: gives real headroom for a densely populated rack, as long as your upstream circuit is provisioned for single-phase 230V at that amperage.
• Switched (not metered-only) design: supports remote on/off control per outlet, useful for staged boot sequences and remote troubleshooting.

Deployment Considerations:

• Confirm your facility runs single-phase 230V power to the rack — this is not a 3-phase or 120V model, so it won't drop into a mismatched circuit.
• With 36 outlets on one unit, plan your cable management and outlet-to-device mapping before racking, since dense outlet counts get messy fast without a labeling plan.

A fit for data center or telecom rack rows standardizing on single-phase 230V power where you want outlet-level remote control across a high outlet count on one PDU, rather than stacking multiple lower-density units.