Server Technology C2X36TE-DQME2M99/ZY Switched 0U Rack PDU

The Server Technology C2X36TE-DQME2M99/ZY is a 36-outlet switched PDU built for 3-phase delta power environments where per-outlet control and phase balancing matter more than raw outlet count. This PRO2 Switched Link unit delivers 21.6 kVA of total capacity off a 208V AC, 60A, 3-phase delta input, feeding a mix of 18x IEC 60320 C13 outlets and 18x HDOT alternate-phase CX outlets across a 0U rackmount form factor. If you're provisioning a high-density rack or row where every U of rail space is already spoken for by servers and switches, this is the class of PDU designed to disappear into the rack rail rather than compete for space in it.

Overview

C2X36TE-DQME2M99/ZY runs on Server Technology's PRO2 Switched Link platform, which means each of the 36 outlets can be individually switched on and off rather than only monitored. That distinction matters in a data center or telecom room where a hung server needs a remote power cycle at 2 AM — you're not walking the floor, and you're not power-cycling the whole rack to reset one node. With 60A input current and 21.6 kVA of total power capacity, the unit is sized for a fully populated high-density cabinet, not a half-empty edge rack.

Key Features

• 18x IEC 60320 C13 + 18x HDOT CX alternate-phase outlets: the mixed outlet layout lets you match cord type to load — C13 for standard IEC power cords on servers and switches, HDOT CX alternate-phase outlets for locking, phase-rotated connections that reduce accidental unplugs in a busy rack and simplify phase balancing across a 3-phase delta feed.
• 21.6 kVA total power capacity: headroom for a rack that's actually full — plan your load calculations against this ceiling rather than guessing, and you avoid the nuisance breaker trips that come from underestimating a dense GPU or blade deployment.
• 60A input current, 208V AC 3-phase delta: matches the input to standard 3-phase delta building power common in enterprise data centers, so electricians aren't adapting an unusual voltage or phase configuration at the panel.
• IEC 60309 3P+PE input connector: an industrial-grade locking input connector rated for the higher current draw of a 60A circuit — not a connector you'll find loose or partially seated after a vibration event.
• 0U rackmount, 70.0" height, 2.2" width, 2.5" depth: mounts vertically along the rear rail and consumes zero horizontal rack units, which on a fully populated 42U-plus cabinet is the only way to add 36 switched outlets without giving up server or switch capacity.
• 36 total outlets: enough outlet density to power a full rack of 1U/2U servers plus networking gear off a single PDU, cutting down on the number of PDUs and home-run circuits you need to manage per cabinet.
• 10ft cord length: long enough to reach an overhead or underfloor power whip without requiring an extension, which keeps the connection point a single, inspectable joint.
• 50/60 Hz frequency support: the unit runs on either standard North American 60Hz or 50Hz power common outside North America, which matters if your build standard needs to travel across regions without a different SKU.

Integration & Compatibility

C2X36TE-DQME2M99/ZY's switched-outlet architecture is built for environments already standardized on Server Technology's PRO2 platform, so it fits into an existing PRO2 monitoring and control deployment without introducing a second management ecosystem. The alternating C13/HDOT CX outlet pattern is worth reviewing against your actual cord inventory before ordering — HDOT CX outlets require compatible locking cords, so audit what's already in the rack. Searches for this model sometimes drop the slash, so it's also findable as C2X36TE-DQME2M99 ZY.

Frequently Asked Questions

Q: What's the total power capacity of the C2X36TE-DQME2M99/ZY?

A: It delivers 21.6 kVA total, fed by a 208V AC, 60A, 3-phase delta input.

Q: How many outlets does this PDU have, and what type?

A: 36 outlets total: 18x IEC 60320 C13 and 18x HDOT alternate-phase CX outlets.

Q: Is this a 0U or rack-unit-consuming PDU?

A: It's a 0U rackmount unit, mounting vertically along the rack rail without consuming horizontal rack space.

Q: What input connector does the C2X36TE-DQME2M99/ZY use?

A: An IEC 60309 3P+PE industrial locking connector, sized for the 60A input circuit.

Q: How long is the input power cord?

A: 10 feet.

Q: What are the physical dimensions of this PDU?

A: 70.0 inches in height, 2.2 inches wide, and 2.5 inches deep — consistent with a vertical 0U rack-rail mount.

Eden Phillips

What stands out on the C2X36TE-DQME2M99/ZY is the outlet mix — 18 standard C13 next to 18 HDOT alternate-phase CX outlets on the same 36-outlet unit. That's a deliberate design for racks running mixed load types off one 3-phase delta feed.

Technical Highlights:

• 21.6 kVA at 60A / 208V 3-phase delta: sizes cleanly against a fully populated high-density cabinet — do the math against your actual nameplate loads before assuming headroom.
• HDOT alternate-phase CX outlets: the alternating phase assignment across the CX bank helps balance load across all three phases automatically as you plug in evenly, rather than leaving phase balancing entirely to manual outlet selection.
• 0U form factor at 70.0" height: the full-height vertical mount is what lets 36 outlets exist without taking a single U away from compute or network gear.

Deployment Considerations:

• Confirm your cord inventory supports HDOT CX connectors before standardizing on this model — it's not a drop-in swap for an all-C13 rack.
• The IEC 60309 3P+PE input and 60A rating mean this expects a dedicated 3-phase delta circuit — verify your electrical infrastructure matches before ordering, this isn't a standard single-phase 208V drop.

This is the right call for a data center operator standardizing a row of high-density GPU or blade racks on 3-phase delta power who needs per-outlet remote switching without sacrificing rack units — the C2X36TE-DQME2M99/ZY earns its keep specifically in that dense, phase-balanced deployment.