Panduit S6-40-M0 StrongHold Cable Tie

The Panduit S6-40-M0 delivers plenum-rated cable management for commercial installations where fire code compliance and outdoor durability intersect. Built from weather-resistant polyamide 6-6, this 5.5-inch intermediate tie handles 40 lb tensile loads while meeting UL 62275 Type 2, 21 requirements for air-handling spaces. The StrongHold economy line gives integrators and datacenter techs a cost-effective bundling solution that doesn't sacrifice UL listing or material spec—critical when inspectors red-tag non-compliant ties during rough-in sign-off. Packaged in 1,000-count boxes with 10,000-piece case quantities, the S6-40-M0 reduces reorder cycles on multi-building projects and keeps install crews stocked through cable-pull phases.

Key Features

• Plenum rated per UL 62275 (Type 2, 21) for AH-2 air-handling installations—meets NFPA 90A low-smoke requirements in return-air plenums and above drop ceilings
• Weather-resistant PA 6-6 polymer engineered for outdoor enclosures, rooftop cable runs, and perimeter camera drops—resists UV degradation and temperature cycling from -40°F to 185°F
• 40 lb minimum tensile strength handles CAT6A trunk bundles, fiber breakout assemblies, and mixed-media pulls up to 1.5" bundle diameter without slip or creep
• 5.5-inch overall length provides margin for double-wrap securing on 3/4" EMT or tight-radius bundling in 2RU cable managers
• Black finish maintains low-visibility appearance in dark-ceiling commercial spaces and blends with outdoor junction boxes on building facades
• 1,000-piece package quantity aligns with commercial rough-in volumes—one box covers approximately 50–70 network drops at 12–15 ties per pull
• RoHS compliant for IT procurement policies requiring lead-free, environmentally responsible components in new construction

Plenum compliance is non-negotiable in return-air spaces—code officials will fail rough-in inspections if ties above the grid don't carry UL 62275 certification. The S6-40-M0's Type 2, 21 listing confirms it meets flame-spread and smoke-density thresholds per NFPA 90A, eliminating the risk of using general-purpose ties that void occupancy permits. Installers working under design-build contracts or spec sheets calling out "plenum-rated cable management" can point to the UL marking and batch code on each tie during AHJ walkthroughs, avoiding costly re-pulls when non-compliant hardware is discovered post-drywall. The PA 6-6 formulation also resists plasticizer migration that can degrade PVC jacket integrity on high-pair-count category cable over multi-year service life, maintaining bundle support without chemical interaction.

Weather-resistant polyamide 6-6 construction makes the S6-40-M0 the default choice for outdoor camera installations, building-to-building fiber interconnects, and rooftop antenna feeds where standard nylon 6 ties embrittle under sustained UV exposure. Integrators running perimeter PTZ drops on chain-link fences or mounting junction boxes on stadium light poles need ties that survive seasonal temperature swings without cracking—the PA 6-6 material retains flexibility at sub-zero temperatures and tensile strength at summer roof-deck extremes (up to 185°F). The black colorant includes carbon-loading that blocks UV wavelength penetration, extending outdoor service life beyond the 6–12 month window where unprotected nylon begins surface chalking and stress fractures. For applications like securing plenum-rated cable along external building walls (under eaves or in conduit entry boxes), the S6-40-M0 bridges the gap between indoor fire rating and outdoor environmental durability in a single SKU.

The 40 lb tensile rating and 5.5-inch working length position this tie for intermediate-duty bundling—heavier than light 18 lb desktop ties but shorter than 8-inch heavy-pull variants used in vertical risers. A 1.5-inch maximum bundle diameter covers typical network rough-in scenarios: twelve CAT6A cables in a horizontal run, a mixed bundle of six CAT6 + four RG6 + two 12/2 power feeds in a retail back-of-house, or a breakout group of eight LC duplex fibers transitioning from distribution to access layer. The curved tip and progressive pawl design allow one-handed tensioning in tight 2-post relay racks or behind wall-mount enclosures where installers can't get two hands on the tie. For datacenter hot-aisle containment or telecom closet cable managers, the 5.5-inch length provides enough tail to double-wrap around 3/4-inch ladder rack rungs or D-ring anchors, then trim flush without leaving sharp edges that abrade jacket insulation during adds/moves/changes.

Bulk 1,000-count packaging matches commercial project consumption rates and reduces reorder interruptions during fast-track construction schedules. A typical office build-out with 60 network drops consumes 720–900 ties (12–15 per pull for horizontal dressing, patch-panel strain relief, and in-wall securing), making the S6-40-M0's box quantity a per-floor supply for mid-rise jobs. The 10,000-piece case quantity supports multi-building campuses, hospitality retrofits, or integrator stock rooms that service recurring service calls—buying by the case cuts per-tie cost and ensures lot-code consistency across a project (important when maintaining traceability for UL-listed materials on inspected jobs). For integrators balancing cost against compliance, the StrongHold line delivers UL 62275 plenum certification and weather-grade polymer at an economy price point, eliminating the budget conflict between using compliant ties and meeting labor budgets on competitively bid work.