Vertiv 1984ST15 Stationary Rack Shelf, 19-In Mount, 15-In Deep

Overview

The Vertiv 1984ST15 is a fixed-depth stationary shelf designed for 19-inch rack mounting with a 15-inch depth profile. It solves the common rack integration problem of supporting non-rackmount equipment — test gear, patch panels, passive devices, or loose components — inside a standard 19-inch enclosure without resorting to improvised solutions. The 1984ST15 is the right choice when you need a rigid, permanent horizontal platform inside a rack bay and depth clearance is not a constraint.

Compatibility

The 1984ST15 is designed for use within Vertiv's rack enclosure ecosystem and is compatible with the Vertiv Essential, Rack, Variable, 4-Post, and 2-Post rack families. The same accessory ecosystem that includes PDU mounting brackets (PDU2ER, PDU3ER), vertical cable bars (VPCB1), power strip brackets (PSBGLRR, PSBGLRR-B), and front mount support brackets (FMSB series) integrates alongside this shelf within those rack configurations. It targets the same 19-inch rail standard used across all of those families, so it slots into any bay with standard EIA-310 19-inch mounting rails. If your rack carries a VCM or VCMX vertical cable management channel, confirm lateral clearance before installing — the shelf occupies the full 19-inch width and may interact with side-mounted accessories.

Installation Notes

Mount type is recessed rack — the shelf mounts flush to the rack rails using standard rack hardware. Verify that your rack's usable interior depth accommodates the 15-inch shelf without conflicting with rear-mounted PDUs, cable management bars, or rear door clearance. The 15-inch depth is fixed; it does not adjust. If your equipment footprint exceeds 15 inches, select a deeper shelf variant within the Vertiv stationary shelf line. Confirm rail spacing and cage nut pattern match your enclosure before ordering.