Vertiv SR2N02010NAA2 2-Rack 10kW Prefabricated Data Center Row with Fire Suppression

The Vertiv SR2N02010NAA2 is a factory-integrated, two-rack prefabricated data center solution delivering 10kW total IT capacity — 5kW per rack — with an integrated fire suppression system (FSS) in a 2700mm linear footprint. If you're standing up a compact, self-contained compute or network row that needs active thermal protection baked in from day one, this is the configuration to evaluate. The SR2N02010NAA2 ships as a ready-to-deploy row unit: racks, cooling, power distribution, and fire suppression aligned before it leaves the factory, reducing field integration time and coordination risk.

Overview

Prefabricated data center infrastructure has become the default approach for remote deployments, satellite facilities, and enterprise edge installs where speed-to-power and code compliance matter more than total square footage. The SR2 series from Vertiv addresses this by packaging 42U racks, precision cooling, and PDUs into a tested, coordinated row. The SR2N02010NAA2 is the two-rack, 10kW, fire-suppression variant — a meaningful distinction from the otherwise identical SR2N02010NAA1, which ships without fire suppression and has a 600mm shorter row length (2100mm vs 2700mm for the FSS-equipped model). That 600mm extension accommodates the FSS enclosure and delivery plumbing, which affects floor-plan planning.

Key Features

• 10kW Total IT Capacity (5kW per rack): Two 42U racks rated at 5kW each give you a realistic deployment envelope for mid-density server and networking loads. At 5kW per cabinet, you're in the range of a fully loaded 1U server row or a dense 10GbE switching stack — workloads that exceed this per-rack density will require the 20kW variants in the SR2N family.
• 42U × 600mm × 1400mm Rack Form Factor: Standard 600mm-wide, 1400mm-deep cabinets accommodate the overwhelming majority of 1U, 2U, and 4U rack-mount gear. The 1400mm depth is critical — anything deeper than 1000mm (blade chassis, high-density storage) fits comfortably without cable management compromises.
• Integrated Fire Suppression System (FSS): The NAA2 designation means the FSS cabinet is included and factory-fitted — a differentiating factor when local codes, insurance requirements, or tenant agreements mandate suppression in enclosed IT rows. Specifying suppression after the fact on an NAA1 row typically requires third-party integration work; here it's engineered-in.
• Single Cooling Unit: One cooling unit handles the full 10kW load across both racks. This is a non-redundant cooling configuration — if the cooling unit goes offline, both racks are exposed. For N+1 thermal redundancy, look at the FAA2 variant in the SR2N family, which includes two cooling units.
• 2× 30A PDUs via 10kW PMC Distribution: Power is delivered through two 30A PDUs fed by a 10kW Power Module Cabinet (PMC). Each PDU serves one rack, keeping power paths discrete. Compared to the PAA2 variant (four PDUs), the NAA2 configuration provides one PDU per rack — adequate for most single-feed server deployments, but not for dual-corded equipment that demands A/B feed separation within the same rack.
• 2700mm Row Length: The FSS-equipped two-rack configuration measures 2700mm end-to-end — 600mm longer than the equivalent non-FSS NAA1 (2100mm). Factor this into raised floor or slab layout drawings before ordering. Aisle containment geometry will also need to account for the FSS module footprint.
• No Power Redundancy (N Configuration): The