Panduit FRTSC6LYL FiberRunner 6x4 Horizontal TEE Split Cover

Overview

The Panduit FRTSC6LYL is the two-section split cover designed specifically for the FiberRunner 6x4 horizontal TEE fitting (FRT6X4LYL). If you're running fiber through a TEE junction in a data center or central office environment and need a cover that can be removed repeatedly without chasing tools around a ladder, this is the correct part. The clip-on design lets technicians install or pull the cover by hand — no screwdrivers, no dropped fasteners, no delay during adds and changes. A 19 mm (approximately 3/4 inch) rounded opening in the cover provides a clean cable-entry point when you need to add or route fiber without fully removing the cover assembly.

Built from a polycarbonate/ABS blend, this yellow cover is sized to match the fiber routing channel profile: 14.5 inches wide, 2.15 inches tall, and 10.68 inches in overall length — the exact geometry of the FiberRunner 6x4 TEE junction it protects. Yellow coloring follows Panduit's FiberRunner color-coding convention for fiber pathways, making it visually distinct from copper or power infrastructure in mixed-media installations.

Key Features

• Tool-Free Clip Attachment: The snap-on mechanism means field technicians can remove and reinstall this cover during MACs (moves, adds, changes) without disrupting adjacent cables or hunting for a screwdriver. In active data centers where uptime matters, faster access to cable pathways reduces exposure time during maintenance windows.
• 19 mm Rounded Cable-Entry Opening: The integrated pass-through aperture lets you route or add fiber cables without fully dismounting the cover. That matters when the TEE is populated with live circuits — partial access beats full disassembly.
• Two-Section Construction: Splitting the cover into two sections makes it manageable in tight overhead or wall-mount runs where a single-piece cover spanning the full TEE width would be awkward to maneuver. Each section can be handled independently.
• Polycarbonate/ABS Material: This blend balances impact resistance (polycarbonate) with the dimensional stability and ease of molding (ABS) needed for a precision snap-fit cover. It holds its shape under the thermal cycling typical of high-density equipment rooms without becoming brittle.
• Yellow Color Coding: Matches the FiberRunner fiber-designation color standard — yellow for single-mode fiber is the convention in most structured cabling environments. Using color-coded covers helps future technicians immediately identify the cable type without opening anything.
• RoHS Compliant: Meets EU Restriction of Hazardous Substances requirements, so this part is suitable for deployments subject to RoHS compliance documentation — relevant for government, healthcare, and enterprise customers with environmental procurement requirements.
• UL-Listed Optical Cable Routing Assembly (to 2024): The FiberRunner system, including this cover, carries UL certification for optical cable routing assemblies. That listing simplifies AHJ approval during data center build-outs and provides documented compliance for facilities that require it.
• Telcordia GR-63-CORE and NEBS Level 3 Compliant: NEBS (Network Equipment Building System) Level 3 is the stringent qualification required for equipment deployed in central office and carrier environments — covering seismic, thermal, fire, and electrical criteria. If you're specifying infrastructure for a telco central office, this compliance is a procurement checkbox that many alternatives won't clear.

Integration & Compatibility

The FRTSC6LYL is engineered exclusively for use with the Panduit FiberRunner 6x4 system, specifically as the cover for the FRT6X4LYL horizontal TEE fitting. It is not a universal cover and will not clip correctly onto other FiberRunner sizes (2x4, 4x4, 12x4) or competitor cable management systems. Verify your installed TEE fitting part number before ordering — the 6x4 designation refers to the channel's 6-inch-wide by 4-inch-deep cross-section. If your installed pathway is a different size, the cover geometry won't align and the clip points won't engage.

This cover integrates into broader cable management infrastructure in data centers and telecommunications central offices. Panduit's FiberRunner system is designed to work alongside ladder rack, cable tray, and conduit in structured cabling architectures. The yellow color-code is consistent across the FiberRunner fiber product line, so this cover will be visually coherent in any FiberRunner-based fiber routing installation. For planning purposes, carton quantity is 5 — useful context when estimating quantities for a full rack row or room build-out.

For larger-scale data center infrastructure deployments requiring full TEE assemblies, junction covers, straight sections, and other FiberRunner components, source them together to ensure system consistency and color uniformity throughout the pathway.

What's in the Box

• 1x Panduit FRTSC6LYL FiberRunner 6x4 Horizontal TEE Split Cover (two-section cover assembly)

Frequently Asked Questions

Q: What fitting does the FRTSC6LYL cover fit?

A: The FRTSC6LYL is the split cover for the Panduit FRT6X4LYL horizontal TEE fitting in the FiberRunner 6x4 system. It is not compatible with other FiberRunner sizes or other manufacturers' cable routing systems.

Q: Does the FRTSC6LYL require tools to install or remove?

A: No. The cover uses a clip-on mechanism that allows tool-free installation and removal. This is intentional for environments where technicians need repeated access to the cable pathway during moves, adds, and changes.

Q: Is the FRTSC6LYL RoHS compliant?

A: Yes. The FRTSC6LYL meets RoHS (Restriction of Hazardous Substances) requirements, making it suitable for deployments with environmental compliance documentation requirements.

Q: Is the FiberRunner system including this cover suitable for telco central office environments?

A: Yes. The FiberRunner system, including this cover, meets Telcordia GR-63-CORE and NEBS Level 3 requirements — the qualification standard for network equipment in carrier central office environments covering seismic, thermal, and electrical criteria.

Q: How many covers come in a carton?

A: Carton quantity is 5 units. Each package (unit of sale) contains 1 cover assembly. Order in multiples of 5 for full-carton pricing where applicable.

Q: What material is the FRTSC6LYL made from?

A: The cover is molded from a polycarbonate/ABS blend, which provides impact resistance and dimensional stability under the thermal cycling conditions typical of high-density equipment rooms.

Jerry Tildsen

The FRTSC6LYL is a detail that tends to get skipped in data center BOM planning until someone's pulling fiber through a TEE junction at 3 AM and can't get the cover off without a screwdriver they don't have. The clip-on two-section design solves a real operational problem — and the 19 mm pass-through opening means you can add a cable to the run without fully dismounting anything. Small spec, meaningful in the field.

Technical Highlights:

• NEBS Level 3 Compliance: This is a hard requirement for carrier central office builds, not a nice-to-have. The FiberRunner system's GR-63-CORE and NEBS Level 3 qualification covers seismic Zone 4, fire, and thermal criteria — documentation that AHJs and telco procurement teams will ask for.
• Polycarbonate/ABS Construction: The material blend matters for snap-fit covers specifically: polycarbonate keeps the clip points from cracking under repeated cycling; ABS keeps the molding tolerances tight so the cover seats flush on the FRT6X4LYL TEE. A pure-ABS cover would be cheaper but more brittle at low temperatures in cold-aisle environments.
• 14.5 in × 2.15 in Profile: These are the exact channel dimensions for the FiberRunner 6x4 pathway — this cover won't fit anything else in the FiberRunner lineup. If your installed TEE is a 4x4 or 12x4, this part is the wrong order.

Deployment Considerations:

• Confirm the installed TEE fitting is the FRT6X4LYL before ordering — the 6x4 cover geometry is not interchangeable with other FiberRunner sizes, and returns on a mis-spec'd cover slow the job down.
• Yellow in the FiberRunner system conventionally designates single-mode fiber. If your site uses a different color-coding standard, document it — using yellow covers on multimode runs will create confusion for whoever works the infrastructure next.

Best fit for telco central offices and enterprise data centers running structured fiber under FiberRunner 6x4 pathways, especially where NEBS compliance is a procurement requirement or where active MACs happen frequently enough that tool-free cover access has real operational value.