Speco Technologies HDCL50 50' CL2 HDMI Cable Male to Male
Overview
The HDCL50 is a 50-foot HDMI cable with male-to-male connectors and CL2 fire-safety certification. CL2 rating means this cable meets the fire-safety standards required for in-wall and plenum installations in commercial buildings — a compliance requirement in most jurisdictions for cables run through walls, ceilings, or HVAC spaces without conduit. The 50-foot length handles extended cable runs in larger facilities (control rooms, matrix switch installations, remote monitor displays) without requiring in-line amplification for standard HDMI video signals.
Compatibility
Works with any device featuring standard HDMI outputs and inputs: DVR/NVR units, video management systems, matrix switches, displays, and projectors used in surveillance and commercial AV control rooms. The male-to-male connector configuration integrates directly with HDMI-equipped endpoints without adapters. If your cabling run includes conduit or surface-mounted raceways (no in-wall penetration), a non-rated HDMI cable may work, but CL2 certification removes compliance risk and inspection delays in commercial deployments.
Installation Notes
The 50-foot length requires careful planning to avoid signal degradation at the display end. Verify the source device (DVR/NVR) and destination display both support standard HDMI signaling; very old or specialty surveillance displays sometimes use DVI or component video instead. Do not coil or bundle the cable tightly — maintain gentle curves to preserve shielding integrity. If the run exceeds 50 feet, consider an HDMI repeater or active extension system, or run fiber HDMI for longer distances in noisy electrical environments.
What's in the Box
- 1x Speco HDCL50 50-foot CL2-rated HDMI cable (male to male)
