Speco Technologies H6WHRN10TB 6-Channel Wall-Mount Hybrid Recorder
Overview
The Speco H6WHRN10TB is a wall-mounted 6-channel hybrid recorder designed to bridge analog and IP camera infrastructure without replacing legacy systems. It accepts 4 hybrid channels (TVI or IP selectable per channel) plus 2 dedicated IP channels — a practical architecture for integrators managing staged upgrades or mixed deployments. With 10TB onboard storage, it delivers approximately 30–50 days of 24/7 continuous recording at standard bitrate across all channels (exact retention depends on resolution and compression codec). The compact wall-mount form factor fits NOCs, server rooms, and distributed branch locations where rack space is constrained.
Compatibility
The H6WHRN10TB integrates with TVI (HD-over-coax) cameras on channels 1–4, allowing you to keep existing analog infrastructure in place. All 6 channels accept standard ONVIF-compatible IP cameras, meaning you can mix brands and standards — Axis, Hikvision, Uniview, or any ONVIF Profile S device. Connects to ONVIF-compliant VMS platforms (Milestone, Wisenet, generic ONVIF clients) for centralized management and playback. No vendor lock-in at the software layer. Wall-mount brackets support direct wall installation or pole-mounted enclosures in branch or field locations.
Installation Notes
Unit draws power via standard 110–240V AC supply (no PoE required for the recorder itself). Hybrid channels 1–4 use BNC connectors for coax TVI input; IP channels 5–6 connect via RJ-45 Gigabit Ethernet. Install in a climate-controlled space — operating temperature range 0–40°C recommended to maximize drive lifespan. Ensure adequate ventilation around the unit to prevent thermal stress on the 10TB drive array. For federal or NDAA-regulated deployments, verify unit serial and manufacturing origin with the supplier before installation.
What's in the Box
- 1x H6WHRN10TB recorder unit with 10TB storage
- 1x power cord (110–240V AC)
- Wall-mount bracket and fasteners
- Quick start guide and user manual