Speco Technologies H16WHRLNM32TB 16-Channel Wall Mount Hybrid Recorder
Overview
The H16WHRLNM32TB is a wall-mounted hybrid recorder engineered for security integrators managing transition environments from analog TVI to IP-based surveillance. It provides 16 simultaneous recording channels—8 hybrid inputs (selectable between TVI or IP per channel) and 8 dedicated IP inputs—with 32TB onboard storage. This architecture eliminates the need to replace legacy TVI camera infrastructure while absorbing new IP deployments, making it a practical choice for phased system upgrades in retail, commercial, and institutional settings. The wall-mount form factor fits control rooms, server closets, and equipment racks where floor space is constrained.
Compatibility
The H16WHRLNM32TB works with TVI (composite video) cameras and standard IP cameras across protocol variants. The 8 hybrid channels accept either TVI or IP signals—no hardware reconfiguration required; selection is made per-channel in software. The 8 IP-only channels support standard ONVIF-compliant IP cameras. Ensure your network infrastructure (PoE switches, NVR bandwidth, and storage connectivity) is sized for 16-stream simultaneous recording; bandwidth demand varies with resolution and frame rate of connected cameras. The unit integrates with VMS platforms supporting hybrid input architectures—confirm compatibility with your chosen management software before deployment.
Installation Notes
Mount the unit securely to a vertical surface (wall or equipment rack) using provided hardware; verify wall stud or rack rail capacity to support the recorder's weight. Provide adequate ventilation around intake and exhaust areas to prevent thermal throttling during 24/7 recording. Use shielded Ethernet cabling for IP channels to minimize interference in electrically noisy environments (factories, HVAC rooms). TVI channels require composite video cabling; keep runs under 300 feet to maintain signal integrity. Verify mains power supply capacity (unit draws significant current during peak recording); dedicated 15A circuit recommended. Configure hybrid channels in the recorder's web interface before connecting cameras—default is typically TVI; IP channel assignment prevents confusion during commissioning.
