Middle Atlantic SNE1/2 PR SP 45UX48D - SNE-SPNH-4548

Middle Atlantic SNE-SPNH-4548 45U Half-Pair Side Panel for 48" Deep SNE Racks

Overview

The Middle Atlantic SNE-SPNH-4548 is a 45U side panel designed specifically for 48-inch deep SNE series enclosures. Sold as a half pair (one panel), it provides a finished, secure enclosure face on one side of your SNE rack — useful when adding or replacing a single panel without purchasing a full pair. If you're building out an SNE rack in a server room, AV head-end, or security equipment closet and need to close off one exposed side, this is the purpose-matched part.

Middle Atlantic's SNE series is a workhorse in rack infrastructure for commercial integrators. The SNE-SPNH-4548 fits squarely into that ecosystem, giving you a factory-matched panel that aligns flush with the SNE frame geometry rather than forcing a workaround with generic sheet metal.

Key Features

• 45U Height Coverage: Spans the full height of a 45U SNE enclosure — no gaps, no exposed rack interior from floor to top rail. A partial-height panel on a tall rack leaves equipment visible and unprotected; this panel covers the entire column.
• 48-Inch Depth Match: Cut and profiled for 48-inch deep SNE racks specifically. Using a shallower panel on a deep rack leaves the rear portion open; this panel closes the full 48-inch run so cable management and rear-mounted equipment stay contained.
• Half-Pair Quantity: Ships as one panel (1/2 pair), so you're not paying for two when you only need to replace or add a single side. This matters on projects where one panel is damaged in shipping or where a rack sits flush against a wall on one side and only the exposed face needs covering.
• SNE Series Compatibility: Engineered as a direct fit for the Middle Atlantic SNE rack family — mounting points, profile edges, and finish align with SNE frame tolerances. Third-party generic panels typically require field modification to close properly.
• Black Finish: Matches the standard SNE rack color, keeping the enclosure visually consistent in finished equipment rooms and wiring closets where appearance is part of the deliverable.
• UNSPSC 24102001: Classified under storage and materials handling equipment — relevant for procurement systems that require commodity coding on rack infrastructure purchases.

Integration & Compatibility

The SNE-SPNH-4548 (often searched as SNE SPNH 4548) is designed for use with Middle Atlantic SNE series racks configured at 45U height and 48 inches of usable depth. Verify your rack's listed depth before ordering — Middle Atlantic offers SNE side panels in multiple depth configurations, and a mismatch will result in a panel that either overhangs the rear frame or leaves a gap at the back. If your SNE rack is shallower than 48 inches, a different SNE side panel SKU is the correct choice. This panel does not apply to Middle Atlantic's non-SNE rack families (WR, ERK, BGR, etc.).

For a complete Middle Atlantic rack enclosure solution, pair this panel with the matching SNE full-pair side panel if both sides are exposed, or with SNE top, bottom, and rear blanking panels to fully enclose the rack. Review the full rack accessories category for blanks, covers, and structural components that work alongside this panel. If you're planning rack layout for a new security or AV head-end, the rack planning guide covers depth, clearance, and panel selection considerations. For power distribution and cable management inside the enclosure, see compatible rack PDU and power accessories.

Frequently Asked Questions

Q: Will the SNE-SPNH-4548 fit a 45U SNE rack that is 36 inches deep?

A: No. The SNE-SPNH-4548 is specifically dimensioned for 48-inch deep SNE racks. Installing it on a shallower rack will result in a rear overhang. Middle Atlantic offers SNE side panels in other depth configurations — match the panel depth to your rack's actual depth specification.

Q: Does this listing include both sides of the rack?

A: No. The SNE-SPNH-4548 ships as a half pair — one panel only. If you need to cover both sides of the rack, you will need two units of this SKU or the equivalent full-pair listing.

Q: Does the SNE-SPNH-4548 work with Middle Atlantic WR or ERK series racks?

A: No. This panel is designed for the SNE series specifically. Middle Atlantic's other rack families use different frame geometries and panel mounting systems — cross-series substitution is not supported.

Q: What color is the SNE-SPNH-4548?

A: Black, matching the standard Middle Atlantic SNE rack finish.

Q: Is the SNE-SPNH-4548 in stock and ready to ship?

A: Stock status is shown live on the product listing. UPC 0656747232510 can be used to confirm the exact unit in your order documentation.

Ted Perry

The SNE-SPNH-4548 comes up on almost every SNE rack build where the integrator is sourcing panels separately — often because one side of a rack butts against a wall and only the outward-facing side needs a panel, or because a panel was damaged on-site and needs a single replacement. The half-pair format is the spec that actually matters here: at 45U and 48 inches deep, this is a large panel, and not having to buy a matched pair when you only need one side is a real cost consideration on multi-rack deployments.

Technical Highlights:

• 45U Full-Height Coverage: Spans the entire 45U column — no partial coverage, no exposed rack interior along the side face. On a fully loaded security head-end rack, an uncovered side is both an aesthetic and a dust/access management issue.
• 48-Inch Depth Fit: Profiled specifically for 48-inch deep SNE frames. A panel cut for a shallower depth leaves the rear of the rack open — relevant when the rack sits in the middle of a room or in a raised-floor data environment where rear exposure matters.
• Half-Pair Quantity: One panel per order. Straightforward on paper, but easy to overlook on a purchase order — if both sides need coverage, order two.

Deployment Considerations:

• Confirm your SNE rack's depth spec before ordering. Middle Atlantic SNE panels are depth-specific — a 36-inch or 42-inch deep rack requires a different SKU. The depth is listed on the rack's label inside the frame.
• This panel is SNE-series only. It will not mount correctly on Middle Atlantic WR, ERK, BGR, or other frame families, which use different panel attachment geometry.

The SNE-SPNH-4548 fits best on SNE rack deployments in finished equipment rooms — broadcast head-ends, security operations centers, or commercial AV installs — where panel consistency and a clean enclosure are part of the final deliverable. It's a straightforward part, but ordering the wrong depth is the common mistake on these jobs.