i-PRO WV-QDC510G Smoke Dome Cover
Overview
The WV-QDC510G is a replacement dome cover for i-PRO U Series fixed dome cameras. It transmits approximately 45% of incident light, which suppresses dome-bounce glare and ceiling reflections without degrading surveillance image clarity. Deploy this when your U Series camera sits in high-brightness zones—direct sunlight on the ceiling, light fixtures facing the dome, or reflective surfaces—and you need optical glare reduction without full housing replacement or camera relocation.
Compatibility
The WV-QDC510G is designed exclusively for i-PRO U Series fixed dome cameras. Before purchasing, verify your camera model against i-PRO's technical support knowledge base using Control No. C0501 on i-pro.com. Do not attempt to fit this cover to non-U Series models; mismatched mounting risks dome separation, loss of camera security, and potential equipment damage. If you require a clear dome variant or support for a different i-PRO camera series, consult the compatibility reference to select the correct cover type.
Installation Notes
Installation must be performed by a trained technician or dealer experienced in dome camera hardware. All screws and bolts must be torqued to manufacturer specification—under-tightening risks dome separation and accidental drop; over-tightening can crack the mounting ring. Read the complete installation guide supplied with the cover and your camera's installation manual before beginning work. Improper installation may result in fire, electrical hazard, physical injury, or equipment loss. The supplied instructions provide torque values and step-by-step procedure.
What's in the Box
- 1x WV-QDC510G smoke dome cover
- Installation instructions
