Server Technology C2SG36TE-DQME2L66/C 0U 3-Phase Smart PDU

Overview

The Server Technology C2SG36TE-DQME2L66/C is a 0U vertical rack PDU built for data center cabinets that need high-density, monitored 3-phase power without giving up a single rack unit. It's part of the PRO2 Smart POPS series, delivering 17.3kW of total power capacity through 36 HDOT outlets fed from a 60A, 208V 3-phase input. If you're populating a full rack of servers, switches, and storage nodes and need outlet-level accountability on the power feeding them, this is the class of unit to look at.

Key Features

• 36 × HDOT Outlets: High-Density Outlet Technology packs 36 outlets into a slim 2.2" wide, 2.5" deep vertical strip — enough outlet count for a fully loaded rack without stealing usable rack space, since this is a 0U form factor mounted in the vertical channel.
• 17.3kW Total Power Capacity: Enough headroom to run dense compute or storage racks pulling steady load without derating concerns at typical data center utilization levels — plan your rack's power budget against this ceiling before stacking additional PDUs.
• 60A Input Current at 208V 3-Phase: A single 60A 3-phase feed replaces what would otherwise take multiple single-phase circuits to deliver equivalent capacity, simplifying whip runs back to the PDU panel.
• IEC 60309 Input Connector: An industrial-grade, twist-lock-style input connector standard in data center environments — matches existing 60A 3-phase whip terminations without field-wiring a plug.
• 10ft Cord Length: Long enough to reach overhead or underfloor power whips in most cabinet rows without an extension, cutting down on slack management inside the cabinet.
• 50/60 Hz Frequency Support: Works on both North American and international utility frequencies, which matters if this unit is being specified for a facility standard deployed across multiple regions.
• 208 VAC Output Voltage: Matches the standard input voltage for most rack-mount server and network equipment power supplies in North American data centers — no step-down or step-up needed at the outlet.
• 70" Rack Height Coverage: Spans a full-height rack vertically, so outlets are distributed top to bottom rather than clustered at one end — shorter cable runs to equipment mounted anywhere in the rack.

Integration & Compatibility

The C2SG36TE-DQME2L66/C mounts in the vertical 0U channel of a standard open rack frame or enclosure, running the full 70" height of the rack. Because it draws from a single 60A 3-phase IEC 60309 feed, it's meant to be specified alongside existing data center 3-phase power distribution — panel-fed whips terminating in a matching 60A 3-phase receptacle. The 36-outlet HDOT layout is designed for high rack unit density, so it pairs naturally with 1U/2U server deployments where outlet count, not per-outlet current, is the constraint. When you're planning a new row of racks, model the C2SG36TE-DQME2L66/C alongside your rack-mount infrastructure and review a power distribution planning guide before finalizing your whip and breaker sizing — 3-phase PDUs change the math compared to single-phase strips. This unit sits in the broader Server Technology PDU catalog, which spans lower-density single-phase models up through higher-capacity 3-phase PRO2 units, so if 36 outlets or 17.3kW doesn't match your rack's real load, a different outlet count or capacity tier in the same PRO2 Smart POPS family is worth comparing before ordering. This model is also cataloged under the power distribution units category alongside complementary rack power gear.

Frequently Asked Questions

Q: What input current and voltage does the C2SG36TE-DQME2L66/C require?

A: It requires a 60A, 208V 3-phase feed terminating in an IEC 60309 connector.

Q: How many outlets does the C2SG36TE-DQME2L66/C have?

A: It has 36 HDOT outlets rated for a combined 17.3kW total power capacity.

Q: Is the C2SG36TE-DQME2L66/C a 0U or rack-unit-consuming PDU?

A: It's a 0U vertical rackmount unit, meaning it mounts in the vertical rack channel and doesn't consume horizontal rack unit space.

Q: How tall is the C2SG36TE-DQME2L66/C and will it fit my rack?

A: It measures 70.0" in height, 2.2" in width, and 2.5" in depth, sized to run the full height of a standard rack enclosure.

Q: What length is the power cord on the C2SG36TE-DQME2L66/C?

A: The unit ships with a 10ft input cord.

Q: Does the C2SG36TE-DQME2L66/C support both 50Hz and 60Hz power?

A: Yes, it's rated for 50/60 Hz operation.

Ted Perry

The C2SG36TE-DQME2L66/C is a 3-phase 0U PDU I'd spec for a rack that's outgrown single-phase strips — 36 HDOT outlets and 17.3kW capacity off a single 60A 208V feed is real density, and the model number is worth writing on the rack elevation drawing before the whip gets pulled.

Technical Highlights:

• 60A 3-phase input via IEC 60309: one industrial connector replaces what would take two or three single-phase circuits to match — fewer whips terminating at the cabinet.
• 17.3kW total capacity across 36 outlets: works out to roughly 480W average per outlet if evenly loaded, though real-world loads are never even — treat this as a rack-level budget, not a per-outlet guarantee.
• 70" height, 2.2" width, 2.5" depth: the slim footprint fits standard vertical 0U rack channels without eating into cable management space on either side.

Deployment Considerations:

• Confirm your facility's whip termination matches the IEC 60309 60A 3-phase connector before ordering — this isn't a NEMA drop-in replacement for existing single-phase infrastructure.
• The 10ft cord length is generous for overhead busway drops but measure underfloor whip runs carefully in older cabinet rows — it's not extendable without a qualified electrician.

This is the right call for a new rack row in a data center standardizing on 3-phase distribution, where outlet count and per-rack power headroom matter more than saving a rack unit — the 0U form factor gives you that headroom for free.