Vertiv 6010-32ELS-B 60x32in E-Series Cabinet Side Panels, Black (Qty 2)

Overview

The Vertiv 6010-32ELS-B delivers a matched pair of black side panels sized at 60 inches tall by 32 inches deep, designed to enclose and finish Vertiv E-Series cabinets. Adding side panels to an open-frame or partially enclosed rack is one of those unglamorous steps that pays dividends in airflow management, physical security, and compliance — panels force air through the front-to-rear path instead of bypassing the equipment, and they close off lateral access to cabling and active gear. This SKU covers both left and right sides in a single order, so you're not chasing a second part number to complete the enclosure.

Compatibility and Fit

The 6010-32ELS-B (often searched as 6010 32ELS B) is dimensioned specifically for Vertiv E-Series cabinets at the 60-inch height and 32-inch depth combination. Before ordering, confirm your cabinet's nominal depth — Vertiv E-Series cabinets are available in multiple depth configurations, and a 32-inch panel will not seat correctly on a shallower or deeper frame. The black finish matches standard Vertiv E-Series aesthetics, keeping mixed-depth deployments visually consistent across a row.

Installation Notes

Side panels on E-Series cabinets typically secure via quarter-turn fasteners or captive screws along the vertical rails — no tools beyond a screwdriver are generally required, and the pair can be installed or removed by a single technician. Once seated, panels contribute to defined hot-aisle/cold-aisle containment strategies by eliminating side bypass paths. If your deployment includes a top or bottom cable entry gland, verify panel cutout requirements before installation to avoid rework.

Frequently Asked Questions

Q: What cabinet series is the Vertiv 6010-32ELS-B compatible with?

A: The 6010-32ELS-B is designed for Vertiv E-Series cabinets at the 60-inch height and 32-inch depth specification. Confirm your cabinet's exact depth configuration before ordering.

Q: Does this SKU include both left and right side panels?

A: Yes — the 6010-32ELS-B ships as a quantity-two set covering both sides of the cabinet.

Q: What color finish do these panels have?

A: The panels are finished in black, matching the standard Vertiv E-Series cabinet aesthetic.

Q: Will these side panels fit a Vertiv E-Series cabinet with a different depth?

A: No. These panels are sized for the 32-inch depth variant. A different depth cabinet will require a panel SKU matched to that dimension.

Eden Phillips

When I spec the 6010-32ELS-B for a data center row build-out, the detail that matters most is the 32-inch depth rating — that figure must align with the nominal depth of the E-Series cabinet frame, not the usable internal depth. A mismatch here means the panel either won't seat flush or will gap at the rail, which defeats both the airflow containment and the physical security purpose of adding panels in the first place.

Technical Highlights:

• 60 × 32 in form factor: Covers the full height and depth of a 60-inch E-Series cabinet in the 32-inch depth configuration — no trimming, no adapters required when matched correctly.
• Quantity-two set: Both left and right panels ship under a single SKU, eliminating the split-order workflow that wastes procurement time on paired accessory builds.
• Black finish: Matches standard Vertiv E-Series cabinet color, keeping row aesthetics consistent without custom finishing — a minor point until you have a customer doing a site walk.

Deployment Considerations:

• Verify the cabinet's nominal depth before ordering — E-Series cabinets ship in multiple depth variants and the panel is not adjustable.
• If the row uses hot-aisle containment hardware (top caps, aisle doors), confirm the side panel profile is compatible with the containment system's edge seals to avoid bypass gaps at the panel-to-containment junction.

The 6010-32ELS-B is the right call for completing a Vertiv E-Series rack enclosure in a structured data center or telecom room environment where airflow management and consistent physical security across a cabinet row are both required — not a best-effort add-on, but a specified part of the enclosure build.