Vertiv CBL0182 18-Inch USB-A to Micro-USB-B Console Data Cable

Overview

The Vertiv CBL0182 is an 18-inch (1.5 ft) USB 2.0 Type-A to Micro-USB 2.0 Type-B data transfer cable built specifically for Avocent KVM switches, DAC interface modules, and server console connections. If you manage Avocent AV-series switches or DAC switching infrastructure and need a verified replacement or spare console cable, CBL0182 is the part to order — it eliminates the guesswork of sourcing a generic cable that may not seat correctly or deliver reliable data transfer in a rack environment.

At 18 inches, the cable is sized for short-reach rack connections: panel-to-switch, switch-to-interface-module, or server-to-KVM runs within the same rack unit row. That length keeps cable slack out of airflow paths and avoids the bundle congestion that longer generic cables introduce in dense 1U/2U deployments.

Key Features

• USB 2.0 Type-A Male to Micro-USB 2.0 Type-B Male: Both connector ends are USB 2.0 — adequate bandwidth for KVM console data and configuration traffic, where you are passing keyboard, video control signals and management data rather than bulk storage transfers. No speed mismatch, no adapter required.
• 18-Inch (1.5 ft) Cable Length: Designed for within-rack runs. A short, managed cable between adjacent units reduces strain on connector ports and keeps patch runs tidy — relevant in high-density data center racks where cable management directly affects cooling and serviceability.
• Verified Compatibility with Avocent AV-Series KVM Switches: The CBL0182 is confirmed compatible with the AV3108 and AV3216 KVM switches — covering 8-port and 16-port Avocent console deployments. If your rack includes either of these switches, this is the correct factory cable, not a field-sourced substitute.
• DAC Interface Module Support: Compatible with the 1016DAC, 2016DAC, 2032DAC, 4032DAC, and 8032DAC interface modules — spanning single to high-density DAC configurations. Procurement teams managing multi-switch DAC environments can standardize on a single cable part number across the line.
• KVM Switch and Server Device Support: Listed device compatibility includes KVM switches, servers, and interface modules — the three connection points in a typical Avocent console access chain. One cable part covers the common link in all three scenarios.
• Vertiv AVOCENT Brand Lineage: Sold under the Vertiv AVOCENT brand, which means this cable is sourced and specified against the same product line as the switches and modules it connects. Generic micro-USB cables vary in connector retention and shielding; this part is specified to the platform.

Integration and Compatibility

The CBL0182 is confirmed compatible with the following Avocent and Vertiv products:

• AV3108 — 8-port Avocent AV-series KVM switch
• AV3216 — 16-port Avocent AV-series KVM switch
• 1016DAC — DAC interface module
• 2016DAC — DAC interface module
• 2032DAC — DAC interface module
• 4032DAC — DAC interface module
• 8032DAC — DAC interface module

If your Vertiv or Avocent KVM infrastructure includes any of the above switches or DAC modules, the CBL0182 is the specified console cable. For broader KVM switch accessories and cabling, verify your switch model against the compatibility list before ordering. This cable is not a universal micro-USB replacement — it is specified for the Avocent platform. If you are building out a new data center console access deployment with Avocent switching, factor one CBL0182 per interface module into your KVM accessory procurement. For complete server management cabling planning, cross-reference your DAC module count against this part number to avoid field-sourcing delays.

Frequently Asked Questions

Q: Which Avocent KVM switches is the CBL0182 compatible with?

A: The CBL0182 is confirmed compatible with the Avocent AV3108 (8-port) and AV3216 (16-port) KVM switches, as well as the 1016DAC, 2016DAC, 2032DAC, 4032DAC, and 8032DAC interface modules.

Q: What are the connector types on the CBL0182?

A: The CBL0182 has a USB 2.0 Type-A Male connector on one end and a Micro-USB 2.0 Type-B Male connector on the other end.

Q: How long is the CBL0182 cable?

A: The CBL0182 is 1.50 feet (18 inches) in length, sized for short within-rack runs between adjacent equipment.

Q: Can the CBL0182 be used with generic servers, not just Avocent KVM switches?

A: The CBL0182 lists KVM switches, servers, and interface modules as supported device types. However, its verified compatibility list covers specific Avocent AV-series and DAC products — confirm your server's console port accepts Micro-USB 2.0 Type-B before ordering for non-Avocent use.

Q: Is the CBL0182 a USB 3.0 cable?

A: No. The CBL0182 is a USB 2.0 cable on both ends — USB 2.0 Type-A to Micro-USB 2.0 Type-B. This is appropriate for KVM console and management data traffic, which does not require USB 3.0 throughput.

James Everett

When integrators ask about the CBL0182, the conversation is usually short: they need the correct factory cable for an Avocent AV3108, AV3216, or one of the DAC modules, and they want to know it will seat and hold without play in the Micro-USB port. At 18 inches, this cable is clearly engineered for rack-internal runs — not a field-improvised substitute pulled from a generic bin.

Technical Highlights:

• USB 2.0 Type-A to Micro-USB 2.0 Type-B: Both ends are USB 2.0 spec — the correct protocol layer for Avocent KVM console and DAC management traffic. You are not moving bulk data; you are passing control signals, and USB 2.0 handles that without bottleneck.
• 1.5 ft (18-inch) Length: Short enough to stay out of airflow lanes in a 1U or 2U rack slot, long enough to reach between adjacent panel faces without tension on the connector. Rack cable management is often an afterthought; a cable sized for the actual run distance is not.
• Verified DAC Module Range: Compatibility spans 1016DAC through 8032DAC — meaning a site running a mix of 16-, 32-, and high-density DAC modules can standardize on one cable part number rather than managing multiple SKUs in spares inventory.

Deployment Considerations:

• This cable is 18 inches — confirmed for within-rack panel-to-switch and switch-to-module runs. If your Avocent switch and the target device are in separate racks or separated by more than one rack unit of distance, you will need a longer cable. Do not stretch an 18-inch run.
• The Micro-USB 2.0 Type-B connector is the limiting factor in port wear over time. In high-cycling environments (frequent connect/disconnect for maintenance), inspect the module-side port periodically — micro-USB retention degrades faster than full-size USB under repeated mating cycles.

The CBL0182 is the right procurement choice for data center teams standardizing Avocent AV-series KVM or multi-density DAC deployments where verified factory cabling is preferred over field-sourced alternatives — particularly in environments with strict hardware change-management policies.