Zebra CRD-RS51-4SCHG-01 4-Slot RS5100 Ring Scanner Charging Cradle
Overview
The Zebra CRD-RS51-4SCHG-01 is a charge-only cradle designed exclusively for the Zebra RS5100 ring scanner, keeping up to four units powered and shift-ready from a single desktop footprint. If you're running a multi-person pick line, a sortation zone, or a goods-to-person cell where RS5100 scanners rotate between operators and charging windows are short, this cradle centralizes replenishment without requiring individual charging cables or single-slot docks scattered across the workstation.
One important structural note before ordering: the CRD-RS51-4SCHG-01 charges through the RS5100's trigger assembly charge contacts — the cradle does not charge the scanner body alone. If your workflow involves removing the trigger assembly between uses, Zebra recommends the 8-slot battery charger (SAC-RS51-8SCHG-01) instead, which handles bare battery packs independently of the trigger assembly.
Key Features
- 4-Slot Simultaneous Charging: All four bays charge at once — no sequential cycling, no priority queuing. For a four-person pick team running back-to-back shifts, one cradle covers the full scanner fleet during a break window without any manual intervention.
- Charge-Through-Trigger Design: Charging contacts are integrated into the RS5100 trigger assembly, not the scanner body. This keeps the electrical interface clean and purpose-built for ring-scanner ergonomics, but it does mean the trigger must remain attached during charging — plan your doffing/donning workflow accordingly.
- Compact Multi-Unit Footprint: Four slots in a single cradle reduces bench clutter in packing stations, kitting areas, and staging lanes where desktop real estate is competed for by label printers, scales, and PCs.
- Dedicated Power Architecture: The cradle is powered by the Zebra PWR-BGA12V50W0WW power supply paired with DC line cord CBL-DC-388A1-01 and AC line cord 23844-00-00R — all sold separately. Specifying Zebra-matched power components avoids voltage/current mismatches that can shorten battery cycle life or trigger charge faults.
- Single-SKU Fleet Charging: Rather than stocking four individual single-slot cradles with four separate power supplies, the CRD-RS51-4SCHG-01 consolidates to one cradle and one power brick — fewer SKUs to procure, fewer cables to manage, fewer failure points at the workstation.
- RS5100-Specific Fit: The cradle is purpose-built for the RS5100 ring scanner family. It is not a universal dock — this specificity ensures positive seating and reliable charge contact engagement every time a scanner is docked.
Integration & Compatibility
The CRD-RS51-4SCHG-01 is compatible exclusively with the Zebra RS5100 ring scanner. Power delivery requires three separately ordered components: power supply PWR-BGA12V50W0WW, DC line cord CBL-DC-388A1-01, and AC line cord 23844-00-00R. None of these are included with the cradle. Factor all four line items into your mobile computing deployment BOM to avoid delays at commissioning. If your site uses multiple charging locations, each cradle station requires its own dedicated power supply and cord set.
What's in the Box
- 1x CRD-RS51-4SCHG-01 Four-Slot Charge-Only Cradle
Frequently Asked Questions
Q: Does the CRD-RS51-4SCHG-01 include a power supply?
A: No. The cradle requires three separately purchased components: power supply PWR-BGA12V50W0WW, DC line cord CBL-DC-388A1-01, and AC line cord 23844-00-00R. None are included in the box.
Q: Can I charge RS5100 scanners without the trigger assembly attached?
A: No. Charging contacts are part of the trigger assembly. If your workflow involves removing the trigger between uses, Zebra recommends the 8-slot battery charger (SAC-RS51-8SCHG-01) instead.
Q: Will the CRD-RS51-4SCHG-01 work with other Zebra ring scanners like the RS6100?
A: No. This cradle is purpose-built for the RS5100 only and is not compatible with other Zebra ring scanner models.
Q: Does all four bays charge simultaneously, or does the cradle cycle between slots?
A: All four bays charge simultaneously — there is no sequential cycling or charge priority logic.
Q: What is the part number for the required power supply?
A: The required power supply is the Zebra PWR-BGA12V50W0WW, paired with DC line cord CBL-DC-388A1-01 and AC line cord 23844-00-00R.
The CRD-RS51-4SCHG-01 is purpose-specific hardware — it does exactly one thing, for exactly one scanner family, with zero ambiguity. What I want buyers to internalize before ordering is the trigger-assembly dependency: charging contacts live on the trigger, not the scanner body, so your doffing workflow at the workstation has to keep the trigger on the scanner when it goes in the cradle.
Technical Highlights:
- 4-Bay Simultaneous Charging: All four RS5100 scanners charge in parallel — no round-robin logic, no priority queuing. At a 4-person pick station with overlapping shift breaks, one cradle covers the full rotation.
- Trigger-Contact Charging Architecture: The charge path runs through the trigger assembly's dedicated contacts. This is a deliberate design choice that keeps the scanner body interface clean, but it mandates that the trigger stays installed during any charge cycle.
- Zebra-Matched Power Stack: PWR-BGA12V50W0WW + CBL-DC-388A1-01 + 23844-00-00R is the validated power trio. Substituting third-party power components risks charge faults or degraded battery cycle counts over time — not worth the $20 saved per station.
Deployment Considerations:
- Order all three power accessories — PWR-BGA12V50W0WW, CBL-DC-388A1-01, and 23844-00-00R — on the same PO as the cradle. Sites that order the cradle first and the power components separately routinely hit a commissioning gap when one component is backordered.
- If your operation cycles the trigger assembly off the scanner for ergonomic or hygiene reasons between operators, this cradle is the wrong choice — the trigger-off scanner body will not make charge contact. Spec the SAC-RS51-8SCHG-01 battery charger instead.
The CRD-RS51-4SCHG-01 is the right call for high-density fulfillment environments — 4PL cross-dock floors, goods-to-person cells, sortation lines — where four RS5100s rotate between a fixed team and charge windows are tight. It consolidates four charge points into one managed station without any sequential charging penalty.
