Vertiv VP1U62A1 Basic Upgradeable Horizontal rPDU

Overview

The VP1U62A1 is a 1U horizontal rack power distribution unit from Vertiv's basic upgradeable rPDU line, designed for high-density three-phase deployments in data center and server room environments. Running at 63A capacity across a 240/415V WYE (3P+N+E, IP44) input, it delivers up to 43.4KW of distributed power through 24 combination C13/C19 outlets — a configuration that fits mixed server and storage environments where both standard and high-draw equipment share the same PDU rail. The VP1U62A1 mounts horizontally in a standard 1U rack slot, keeping the power plane clean and accessible without consuming vertical tool space.

Compatibility

The VP1U62A1 is sized for high-density rack deployments running IEC 60309 three-phase input with WYE neutral configuration. The 24 combination outlet positions each accept either C13 (standard 1U/2U server) or C19 (high-power compute, storage arrays, network spine switches) plugs, eliminating the need to pre-spec outlet type per rack position. Compatible with rack equipment drawing from standard C14/C20 input cords in environments where the upstream circuit delivers 240/415V three-phase. Intended for deployments in Europe, Asia-Pacific, and other 415V WYE grid regions — not for North American 120/208V infrastructure.

Installation Notes

Designed for horizontal 1U mounting in a standard 19-inch rack (17.12 in. wide, 3.48 in. tall, 12 in. deep). Unit weight is 19 lbs — a two-person lift is advisable when installing into populated racks. The IP44-rated input connector (3P+N+E) requires a compliant high-current three-phase feed; verify upstream circuit breaker sizing for 63A continuous draw before provisioning. The upgradeable designation indicates the unit supports optional monitoring or metering modules — verify available expansion options with the current Vertiv rPDU accessory line before purchase if remote monitoring is a future requirement.