Zebra CR40-1S0T-TC5-M-01 Single-Slot RFD40 TC5X Charge-Communication Cradle
Overview
The CR40-1S0T-TC5-M-01 is a single-slot ShareCradle designed to keep the Zebra RFD40 RFID sled and a paired TC5X mobile computer charged and communicating — simultaneously. Rather than juggling separate charging accessories for the sled and the host device, this cradle handles both in a single footprint: charge the RFD40 alone, charge the TC5X alone, or drop in the paired assembly and charge both together. USB connectivity to a PC is provided for the RFD40, which matters when you need to push firmware updates, pull RFID read logs, or configure the sled via Zebra's utilities without pulling it off a cart.
This is a purpose-built docking solution for operations running Zebra mobile RFID workflows on TC5X devices — retail inventory, warehouse cycle counts, and asset tracking environments where the RFD40 sled rides paired to a TC51, TC52, TC52x, TC52ax, TC56, TC57, or TC57x. If your team is already invested in the TC5X platform, this cradle slots into that ecosystem without compromise.
Key Features
- Single-Slot ShareCradle Design: One cradle accepts either the RFD40 sled alone, the TC5X alone, or the RFD40+TC5X assembly together — meaning you don't need separate cradles for different charging scenarios. This simplifies your charging station layout and reduces SKU count at procurement.
- Simultaneous Dual Charging: When the RFD40 is docked paired to a TC5X, both devices charge concurrently. Workers drop in the full assembly at shift end and pick up fully charged hardware at shift start — no partial charges, no missed steps.
- USB Communication to the RFD40: The cradle exposes a USB data path to the RFD40 sled specifically, enabling PC connectivity for firmware management and configuration. Note that USB communication is to the RFD40 only — the TC5X is not on this data path through the cradle.
- Broad TC5X Compatibility: Verified support covers the TC51, TC52, TC52x, TC52ax, TC56, TC57, and TC57x. That spans multiple generations and variants of the TC5X family, so this cradle remains usable as your device fleet evolves within the platform.
- Consolidated Power Infrastructure: A single power supply (PWR-BGA12V50W0WW) and DC line cord (CBL-DC-388A1-01) feed the cradle. One outlet, one cable run per station — cleaner than per-device wall adapters when deploying a row of charging stations in a back office or break room.
- Purpose-Built for the RFD40 Ecosystem: The CR40-1S0T-TC5-M-01 is engineered specifically for the RFD40 mobile RFID sled platform, so the mechanical fit, charge contacts, and communication interface are matched to Zebra's own tolerances — not an aftermarket approximation.
Integration & Compatibility
The CR40-1S0T-TC5-M-01 (often searched as CR40 1S0T TC5 M 01) supports the following Zebra devices:
- RFD40 Sled — primary RFID accessory this cradle is built around
- TC51, TC52, TC52x, TC52ax — mid-range TC5X variants confirmed compatible
- TC56, TC57, TC57x — extended-range and enterprise TC5X variants confirmed compatible
Communication interface is USB. Charging requires three separately ordered accessories: the Zebra Level VI AC/DC Power Supply (PWR-BGA12V50W0WW), DC Line Cord (CBL-DC-388A1-01), and US AC Line Cord (23844-00-00R). For PC connectivity to the RFD40, use the Zebra Micro USB Cable (25-124330-01R). None of these are included in the cradle package — plan your mobile computing accessory order accordingly to avoid a delayed deployment.
If you are deploying multiple charging stations, consider how many power supply SKUs you will need per cradle. Each CR40-1S0T-TC5-M-01 requires its own power chain — there is no daisy-chain or multi-cradle power distribution built into this unit.
What's in the Box
- 1x Zebra CR40-1S0T-TC5-M-01 Single-Slot Charge-Communication ShareCradle
Not included: Power Supply (PWR-BGA12V50W0WW), DC Line Cord (CBL-DC-388A1-01), AC Line Cord (23844-00-00R), USB Cable for PC connectivity (25-124330-01R). These must be ordered separately.
Frequently Asked Questions
Q: Does the CR40-1S0T-TC5-M-01 charge both the RFD40 and TC5X at the same time?
A: Yes. When the RFD40 sled is docked paired to a compatible TC5X device, the cradle charges both simultaneously. It also supports charging either device independently.
Q: Does USB communication work for both the RFD40 and the TC5X through this cradle?
A: No. USB communication via this cradle is available to the RFD40 only. The TC5X is not on the USB data path through this cradle — it charges but does not establish a USB connection to the host PC via the cradle.
Q: Which TC5X models are compatible with the CR40-1S0T-TC5-M-01?
A: Confirmed compatible devices include the TC51, TC52, TC52x, TC52ax, TC56, TC57, and TC57x.
Q: Does the power supply come included with this cradle?
A: No. The power supply (PWR-BGA12V50W0WW), DC line cord (CBL-DC-388A1-01), and AC line cord (23844-00-00R) are required for charging but are sold separately. The USB cable for PC connectivity (25-124330-01R) is also sold separately.
Q: Can I use this cradle with a TC52ax without the RFD40 attached?
A: Yes. The cradle supports standalone charging of any compatible TC5X device, including the TC52ax, without the RFD40 sled present.
Q: Is this cradle compatible with Zebra TC5X devices other than those listed?
A: Verified compatibility is limited to the TC51, TC52, TC52x, TC52ax, TC56, TC57, and TC57x per Zebra's documentation. Compatibility with devices outside this list cannot be confirmed without additional manufacturer guidance.
The CR40-1S0T-TC5-M-01 is one of those accessories that looks straightforward until you try to deploy 20 stations and realize you ordered the cradles but forgot the power chain entirely. The cradle itself does exactly what it says — single slot, charges the RFD40 and TC5X together or independently, and provides USB data back to a PC for the RFD40 specifically. That last point is the one I see teams overlook most: USB connectivity goes to the sled, not the phone. If you are planning to push firmware to TC5X devices through this cradle, that is not going to work — the TC5X needs its own data path.
Technical Highlights:
- Simultaneous RFD40 + TC5X Charging: The cradle handles the paired assembly in a single dock — no need to separate the sled from the mobile computer at end of shift, which cuts the time workers spend at the charging station.
- USB to RFD40 Only: Data communication is scoped to the RFD40 via the USB interface, enabling sled configuration and firmware updates from a PC without removing the unit from the station.
- Seven TC5X Variants Supported: TC51, TC52, TC52x, TC52ax, TC56, TC57, TC57x — the breadth of coverage means this cradle works across a mixed TC5X fleet without per-model cradle variants.
Deployment Considerations:
- Budget the full power chain per station: PWR-BGA12V50W0WW (power supply), CBL-DC-388A1-01 (DC cord), and 23844-00-00R (AC cord) are all required and sold separately — this is a common procurement gap that delays first-day deployments.
- If your workflow requires TC5X USB connectivity at the dock (e.g., MDM staging or data sync), this cradle does not provide it — the TC5X USB path is not exposed through the CR40-1S0T-TC5-M-01.
This cradle is well-suited for retail backroom charging stations and warehouse shift-change points where workers dock the full RFD40+TC5X assembly at the end of a shift and need both devices ready for the next crew — with the added benefit of being able to update RFD40 firmware at the same station without any additional hardware.
