Middle Atlantic Rectangular (Square Corner) Lace Bar 10 pieces Pack - LBP-1S

Middle Atlantic LBP-1S Rectangular Flat Lace Bar — 10-Piece Rack Pack

The Middle Atlantic LBP-1S is a 19-inch horizontal lace bar designed to keep cable bundles organized, separated, and accessible inside open-frame and enclosed rack systems. At just 0.25 in tall and 0.19 in deep with a flat, zero-offset profile, it drops into tight 1U-and-under spaces where deeper or angled bars simply won't fit — a practical advantage in dense NVR, switch, and patch panel builds where every RU counts. Each pack ships ten bars, so a single order covers a full rack column or equips multiple shorter runs without an extra procurement step.

Key Features

• 19-inch full-rack width (48.3 cm): spans standard 19-inch EIA racks from rail to rail without adapters, giving you consistent, side-to-side cable routing across every horizontal run. Whether you're dressing Cat6 home runs from a PoE switch or managing fiber patch cords behind an NVR stack, the bar reaches the full rack interior in one pass.
• Flat style, 0° offset angle, 0-inch offset: no bend, no rise — the LBP-1S sits flush at the mounting plane. This matters in shallow-depth racks or wall-mount enclosures where a raised or angled bar would force cable bends that violate minimum bend radius on fiber or shielded Cat6A.
• 0.25 in height, 0.19 in depth: the slim cross-section lets you mount the bar in the narrow gap between two patch panels or switches without consuming a dedicated rack unit. In a 12U surveillance rack with eight PoE switch ports, a NVR, and patch panels, that space efficiency is a real planning win.
• Two mounting points: dual fastener holes give secure, rattle-free attachment to standard rack rails. No risk of the bar rotating under cable weight the way a single-point clip can — relevant when you're routing 20+ cables across a single bar.
• Horizontal component orientation: purpose-built for left-to-right cable routing across the rack face. Pair vertical managers (sold separately) at the sides and these horizontal bars at every 1–2U interval for a complete cable management grid that survives moves-adds-changes without a full re-dress.
• 10-piece pack: enough bars to fully dress a 20U rack at 2U intervals, or a 10U rack at every unit — reduces per-unit cost and eliminates partial-order shortfalls mid-installation. Shipping weight is 2.2 lbs (1 kg) for the set, so freight planning is straightforward.
• Rectangular (square corner) construction: square corners, not rounded, give a defined cable channel edge that keeps bundles visually aligned. Installers dressing racks to structured cabling standards will find the straight edge easier to align with horizontal runs than radius-edged alternatives.

Integration & Compatibility

The Middle Atlantic rack accessories line is engineered around standard EIA-310 19-inch rack infrastructure, and the LBP-1S fits that ecosystem directly. The 19-inch span and dual-hole mounting pattern align with Middle Atlantic's own open-frame and enclosed rack enclosures, as well as third-party 19-inch two-post and four-post racks from other manufacturers. No adapters or spacers are required in a standard EIA rail configuration.

These bars are most useful in security and AV cable management applications where you need to route power, data, and video cabling cleanly inside rack enclosures — NVR stacks, PoE switch bays, access control panel racks, and server closets all benefit from consistent horizontal dressing. For complete rack cable organization, combine with vertical cable managers and horizontal ring managers from the same Middle Atlantic product family to build a structured, maintainable cabling architecture.

The LBP-1S (often searched as LBP 1S) does not require any tools beyond a standard screwdriver for installation. The flat, zero-offset design is compatible with both shallow 2-post relay racks and deeper 4-post server-style cabinets — the bar projection into the rack interior is minimal at 0.19 in depth.

What's in the Box

• 10× Middle Atlantic LBP-1S horizontal flat lace bars

Frequently Asked Questions

Q: How many lace bars are included in one order of the LBP-1S?

A: Each pack contains 10 individual Middle Atlantic LBP-1S lace bars. This is enough to dress a 20U rack at 2U spacing or a 10U rack at 1U spacing from a single order.

Q: What rack width does the LBP-1S fit?

A: The LBP-1S is 19 inches (48.3 cm) wide, designed for standard EIA-310 19-inch rack rails. It will not fit 23-inch telco racks without an adapter.

Q: Does the LBP-1S take up a full rack unit (1U) of space?

A: No. At only 0.25 in tall and 0.19 in deep, the LBP-1S mounts between rack units or in the gap between devices without consuming a dedicated 1U slot — it mounts to the rails directly, not to a blanking panel space.

Q: Is the LBP-1S angled or offset?

A: Neither. The LBP-1S has a flat style with a 0° offset angle and 0-inch offset — it sits completely flush at the rack mounting plane with no rise or tilt, which preserves cable bend radius in tight enclosures.

Q: How many mounting points does the LBP-1S use?

A: Two mounting points (one per rail side), which prevents the bar from rotating under cable weight — an important detail when routing dense bundles of 20+ cables across a single bar.

Q: What is the shipping weight for a 10-pack of LBP-1S bars?

A: The shipping weight for the complete 10-piece pack is 2.2 lbs (1 kg).