Panduit PWBIB2EZ Wire Basket Radius Intersection Bracket Kit

Overview

The Panduit PWBIB2EZ is a steel radius intersection kit designed for 2-inch-high wire basket tray systems, giving installers the hardware they need to negotiate corners and branch-offs without cutting or fabricating custom bends on-site. Each package contains two brackets, which gives you the flexibility to build either one tee-intersection or two 90-degree bends — a practical combination for data centers, telecom rooms, and structured cabling pathways where routes change direction frequently. The electro zinc finish provides corrosion resistance suited to indoor equipment rooms and light commercial environments.

When you're laying out a cable management pathway and hit a horizontal direction change or a branch point, the PWBIB2EZ eliminates the guesswork. Rather than forcing a straight basket to take an abrupt angle, the radius design keeps cable bend radii within acceptable limits — protecting high-count fiber and Cat 6A runs from strain that degrades performance over time. This matters most in server rooms and IDF closets where cable density is high and re-pulling is expensive.

Key Features

• Two-Bracket Pack (1 Tee or 2 × 90° Bends): A single PWBIB2EZ package gives you enough hardware for one full tee-intersection or two independent 90-degree turns. This keeps the bill of materials straightforward — count your corners and branch-offs, order accordingly, no partial kits or leftover hardware.
• 2-Inch Basket Height Compatibility: The brackets are engineered specifically for 2-inch-high Panduit wire basket sections. Using the wrong bracket height on a basket system is a common installation error that causes misalignment and cable pinch points — specifying PWBIB2EZ for 2-inch basket eliminates that risk outright.
• Steel Construction with Electro Zinc Finish: Steel provides the structural rigidity needed to support cable loads across an intersection point where multiple basket runs converge. The electro zinc (silver) finish resists oxidation in controlled indoor environments, maintaining appearance and conductivity at the grounding joint over the life of the installation.
• UL Classified for Equipment Grounding Conductor: The PWBIB2EZ meets UL classification requirements for use as an Equipment Grounding Conductor under NEC Sections 392.3(C) and 392.7(B). In practical terms, this means the basket system — including these intersection brackets — can serve as the EGC for branch circuits, which simplifies wiring and satisfies the authority having jurisdiction (AHJ) without additional ground wiring at each junction.
• Radius Design Protects Cable Integrity: Unlike sharp 90-degree basket splices, the radius geometry maintains a controlled bend through the turn. For fiber optic cabling and high-density copper, staying within minimum bend radius specs is non-negotiable — sharp bends in basket systems are a leading cause of signal degradation that only shows up months after installation.
• EZ Installation Format: The EZ designation in the part number indicates a tool-reduced assembly approach consistent with Panduit's EZ series, making field installation faster and reducing the chance of assembly errors under deadline pressure.

Integration & Compatibility

The PWBIB2EZ is built for Panduit's wire basket product line and is sized for 2-inch-high basket sections. Competitive cross-references include RAD T 90 12 KIT 2EZ, EZT/90KIT, FTACRS-12-2 EG, and RADIUS CORNER SPLICE EZ — installers switching from or comparing those alternatives can confirm fit against those part numbers. The basket system, with these brackets installed, satisfies NEC 392 requirements for equipment grounding, which is relevant for any installation where the basket is being used as part of the branch circuit EGC path. Pair with compatible Panduit wire basket sections, splice plates, and cable management accessories to complete the pathway. For larger-scale structured cabling projects, combining with a PoE switch infrastructure plan ensures your cable pathway supports both power and data runs efficiently.

What's in the Box

• 2 × Steel radius intersection brackets (electro zinc finish)

Frequently Asked Questions

Q: How many brackets come in the PWBIB2EZ package?

A: The PWBIB2EZ comes with two brackets per package. Two brackets build either one tee-intersection or two 90-degree bends in the wire basket system.

Q: What basket height is the PWBIB2EZ compatible with?

A: The PWBIB2EZ is designed specifically for 2-inch-high wire basket sections. It is not interchangeable with bracket kits sized for other basket heights.

Q: Is the PWBIB2EZ UL listed or classified?

A: Yes. The PWBIB2EZ is UL Classified for suitability as an Equipment Grounding Conductor in accordance with NEC Sections 392.3(C) and 392.7(B).

Q: What finish does the PWBIB2EZ use, and is it suitable for outdoor installations?

A: The brackets have an electro zinc finish (silver). This is designed for indoor use in controlled environments. For outdoor or high-humidity applications, verify corrosion resistance requirements against the installation environment before specifying.

Q: What are the competitive equivalents to the PWBIB2EZ?

A: Documented cross-references include RAD T 90 12 KIT 2EZ, EZT/90KIT, FTACRS-12-2 EG, and RADIUS CORNER SPLICE EZ. Always verify dimensional compatibility before substituting.

Q: Can I use the PWBIB2EZ brackets to build both a tee and a 90-degree bend from the same package?

A: No. The two brackets in the package support either one tee-intersection or two 90-degree bends — not both simultaneously. Plan your pathway layout before ordering quantities.

Karl Wilson

The detail most installers miss on the PWBIB2EZ is the UL classification under NEC 392.3(C) and 392.7(B) — that classification means the basket assembly, with these brackets installed, can legally serve as the equipment grounding conductor for branch circuits. In a busy IDF build-out, that's a genuine labor saver: no separate ground wire at each basket junction, and the AHJ won't send you back to pull one.

Technical Highlights:

• Two-Bracket Flexibility: One package covers either a tee-intersection or two independent 90-degree bends — useful when your pathway layout includes both branch-offs and corner turns, since you can distribute the two brackets as needed rather than buying separate kits for each configuration.
• 2-Inch Height Specificity: The brackets are dimensioned for 2-inch basket height only. This isn't a limitation so much as a precision spec — mismatched bracket height is one of the more common basket installation errors and leads to misaligned sections that need rework mid-project.
• Electro Zinc Steel: Steel construction handles the load at intersection points where multiple runs converge. The electro zinc finish keeps conductivity stable at the grounding joint, which matters for the EGC path to remain compliant long-term.

Deployment Considerations:

• Count your tee-intersections and 90-degree bends separately when generating your material list. One package handles one tee OR two 90s — not a mix — so a pathway with both types needs careful bracket accounting before purchase orders go out.
• The electro zinc finish is rated for indoor, controlled environments. If the installation runs through a mechanical room with elevated humidity or any outdoor segment, verify whether the finish meets the corrosion requirements for that specific zone before committing to this part number.

The PWBIB2EZ is the right call for structured cabling pathways in data centers and server rooms where basket runs need to branch or change direction, and where the NEC 392 EGC classification needs to extend cleanly through every intersection without additional grounding hardware.