AMD 100-300000170 Workstation Graphics Card

The AMD 100-300000170 is a Radeon PRO W7900 workstation graphics card built around AMD's W7900 chipset with 48 GB of GDDR6 memory on a 384-bit bus — a spec set aimed at engineers and technical teams running memory-hungry CAD, simulation, and rendering workloads that outgrow consumer-class cards. It ships as a dual-slot, plug-in card form factor over a PCI Express 4.0 x16 host interface, drawing 295 W at full load. If your workstation build needs to hold large 3D scenes, high-resolution textures, or sizable simulation datasets entirely in video memory without spilling to system RAM, the 48 GB capacity on this card is the deciding spec.

Overview

This is a professional-tier plug-in card, not a consumer gaming GPU — the chipset, memory footprint, and PCIe 4.0 interface point squarely at workstation deployments where model complexity or dataset size exceeds what an 8-16 GB consumer card can hold. The 100-300000170 occupies dual slot space in the host chassis, so plan your case and motherboard slot spacing before ordering — a dual-slot card can block an adjacent PCIe slot on some ATX and workstation boards.

Key Features

• 48 GB GDDR6 memory: Large local memory capacity means bigger scenes, higher-resolution textures, and larger simulation meshes stay resident on the card instead of streaming from system RAM — directly reduces stutter and load times in memory-bound CAD and visualization workloads.
• 384-bit memory bus: A wide memory bus paired with GDDR6 supports the sustained memory bandwidth that large-dataset rendering and compute workloads need to keep the GPU fed rather than bottlenecked on memory access.
• PCI Express 4.0 x16 host interface: PCIe 4.0 doubles the per-lane bandwidth of PCIe 3.0, which matters when moving large datasets between system memory and the card's 48 GB frame buffer — confirm your motherboard's x16 slot is wired for PCIe 4.0 to get the full benefit.
• Triple DisplayPort output: Three DisplayPort connections let you drive a multi-monitor workstation setup — CAD, video editing, and financial-modeling desks commonly run three or more displays off a single card without needing a secondary GPU.
• 295 W power consumption: A defined 295 W draw lets you size your power supply and case airflow correctly up front — undersizing PSU headroom on a dual-slot 295 W card is a common cause of instability under sustained compute load.
• Dual-slot form factor: The card occupies two adjacent expansion slots, so confirm chassis clearance and neighboring slot spacing before rack or tower integration — this is a real constraint in dense workstation builds with multiple add-in cards.

Integration & Compatibility

The 100-300000170 (often searched as 100 300000170) installs into any motherboard or chassis with a free PCIe 4.0 x16 slot and adequate dual-slot clearance. Because it presents as a standard PCIe 4.0 x16 plug-in card, it is backward-compatible with PCIe 3.0 slots, though you'll cap bandwidth at PCIe 3.0 rates in that scenario. Pair it with adequate case airflow and a power supply rated well above the card's 295 W draw to leave headroom for the rest of the system. For builders assembling a full workstation around this card, review a computer components selection guide to confirm motherboard slot layout and PSU sizing before ordering. Teams standardizing on AMD's professional graphics line can browse the full AMD product catalog for compatible chipset and memory configurations across the Radeon PRO family.

Frequently Asked Questions

Q: How much memory does the AMD 100-300000170 have?

A: It carries 48 GB of GDDR6 memory on a 384-bit bus, aimed at large datasets in CAD, simulation, and rendering workloads.

Q: What host interface does the 100-300000170 use?

A: PCI Express 4.0 x16.

Q: How many displays can the 100-300000170 drive?

A: Three, via its three DisplayPort outputs.

Q: How much power does the 100-300000170 draw?

A: 295 W, which should factor into power supply sizing for the full workstation build.

Q: Is the 100-300000170 a single-slot or dual-slot card?

A: Dual-slot — confirm chassis and motherboard slot clearance before installation.

Ted Perry

The 100-300000170 is one of those cards where the spec sheet tells you the whole story: 48 GB of GDDR6 on a 384-bit bus is built for one thing — keeping big datasets resident on the GPU instead of thrashing system memory. That's the number I point workstation buyers to first.

Technical Highlights:

• 48 GB GDDR6 / 384-bit bus: Enough local memory to hold large assemblies, high-res texture sets, or sizable compute datasets without memory-swap penalties that tank frame times in CAD and visualization tools.
• PCIe 4.0 x16 host interface: Doubles PCIe 3.0's per-lane throughput, which matters when you're streaming large models or datasets into that 48 GB frame buffer repeatedly during a work session.
• 295 W power draw, dual-slot: A known, moderate power figure for a card of this memory class — makes PSU sizing straightforward, but the dual-slot footprint means you lose an adjacent expansion slot, so check your board layout first.

Deployment Considerations:

• Confirm your motherboard's PCIe x16 slot is actually wired for Gen 4 — dropping to a Gen 3 slot won't break the card, but it caps the bandwidth advantage that large-dataset workflows benefit from.
• Triple DisplayPort output covers most multi-monitor CAD and editing desks, but if you need more than three displays you'll need a second card or a DisplayPort MST hub — this card doesn't natively exceed three outputs.

This is the card to spec when a workstation build's CAD assemblies, 3D scenes, or simulation datasets are large enough that a 16 GB or 24 GB card starts swapping — the 100-300000170's 48 GB frame buffer is the whole reason to pick it over a smaller Radeon PRO variant.