Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Questions about this product? Free pre-sales support from a senior specialist — product questions, compatibility checks, BOM quotes, price confirmation — typically answered within one business day. Need camera placement or system design work? Engineering time is $175 per hour (qty 1 = 1 hour). Hardware buyers get up to one hour ($175) credited back on their order.
The CAB-PCIE10M-8644-8X is a 1.0 m PCIe JBOD special cable from QNAP, purpose-built to connect compatible QNAP PCIe expansion enclosures to their host PCIe adapter card. With SFF-8644 8X connectors on both ends, it carries the full-width PCIe signal path needed for high-throughput storage expansion — the kind of bandwidth headroom that matters when you're adding dense drive shelves to a production NAS. This is not a generic SAS cable; it is a proprietary-specification cable engineered specifically for the QNAP expansion line and should only be used in that context.
This cable is compatible with a narrow, specific set of QNAP hardware — do not assume broader SFF-8644 interoperability. Verified compatible pairings:
If you are connecting a NAS expansion unit using a standard Mini-SAS HD (SFF-8644 4X) interface, see the CAB-PCIE10M-8644-4X instead — that variant uses 4X connectors and is priced and rated differently. Confirm your enclosure's connector width before ordering.
Cable length is fixed at 1.0 m — plan rack layout so the JBOD enclosure and host NAS are within one rack unit of each other or in adjacent units. The SFF-8644 8X connector is physically keyed and latched; seat it fully until the latch clicks on both ends before powering the system. Do not route this cable through tight bends or over sharp chassis edges — PCIe signal integrity is sensitive to mechanical stress at this bandwidth. For longer runs or alternate configurations, consult QNAP's compatibility documentation for your specific TL-R series model.
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
PCIe JBOD expansion cable designed for use with QNAP TL-RX00 series storage enclosures
QNAP Mini-SAS HD cable using the SFF-8644 connector standard, designed for 12Gbps SAS connectivity between QNAP NAS units and compatible SAS
Mini-SAS HD 12Gb/s cable using the SFF-8644 external connector standard — the interface used to connect QNAP NAS enclosures to compatible storage
2-meter Mini SAS external cable that bridges an SFF-8644 host-side connector to an SFF-8088 device-side connector
0.5-meter Mini-SAS cable running SFF-8644 (host side) to SFF-8088 (target side) at SAS 12Gbps
Looking for more QNAP products? Shop the full QNAP catalog →
Support services and planning resources for commercial surveillance, access control, and infrastructure deployments.
Fixed scope • Fixed price
